Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD uninstalling program, 0x0000007a

18 Nov 2012   #1
Glitchyguy

Windows 7 Starter x86 SP1 and Windows 7 Home Premium x64 SP1
 
 
BSOD uninstalling program, 0x0000007a

Hi,

On my Netbook I've just had the KERNEL_DATA_INPAGE_ERROR bluescreen.

I've checked my drivers and made sure their updated, but it still gives me the error.

Please help

I can still get into normal windows mode aswell as safe mode

The program is Epson Download Manager

Thanks, any helps appreciated..


My System SpecsSystem Spec
.
18 Nov 2012   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Welcome to SevenForums

Please upload the dump files following: http://www.sevenforums.com/crashes-d...tructions.html

From the usual causes of the bugcheck it can be Memory... Paging file corruption.... File system.... Hard drive.... Cabling, Virus infection, Improperly seated cards, BIOS, Bad motherboard, or a Missing Service Pack.
My System SpecsSystem Spec
25 Nov 2012   #3
Glitchyguy

Windows 7 Starter x86 SP1 and Windows 7 Home Premium x64 SP1
 
 

Keeps coming up with a error, 'You do not have permission to open this file, any suggestions?
My System SpecsSystem Spec
.

25 Nov 2012   #4
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Did you run as administrator?

Run these tools and delete anything they find:ESET online scanner:
Make full scans with MSE and MBAM. Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

And take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
Errors are sometimes found after 8 passes.
Do this test overnight, before going to bed.
My System SpecsSystem Spec
Reply

 BSOD uninstalling program, 0x0000007a




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 Running Very Slow After Uninstalling A Program
Hello. I have a problem, one day ago i was surfing the net, when suddenly, a setup window appeared, and my mouse cursor was stuck in a place, appearently, on the "Next" button of the setup. It started clicking and clicking. After a few seconds, the window dissapeared and i saw a new shortcut on the...
General Discussion
Uninstalling a program completely
HI Guys... I recently uninstalled a program from my computer to install the latest version of that same program but during the installation it keeps telling me that "A previous installation of that program has been found. This installation needs to be removed before you can go on with the new...
Software
Uninstalling a program
Hi, I want to uninstall a program called "ExpressFiles". When I try to uninstall the program I get a pop-up message. I am attaching the name of the program and the pop-up message. What is the danger if I keep the program. What harm is it llikely to inflict my system. By the way I use Windows 7...
Software
Uninstalling a 32 bit program on 64 bit version of 7
I recently installed a 32 bit program, using compatibility mode, on my computer with a 64 bit version of Windows 7. Everything worked fine with the install but I have since acquired a 64 bit version of the same program and want to install it. The problem is, when I try to uninstall the 32 bit...
Software
uninstalling program with no disk or uninstaller
alright my buddy installed roller coaster tycoon 3 onto his system and the disks got messed up in a recent move, and somehow he messed it up so it wont let him uninstall the program, it keeps and he deleted the uninstaller package that installed with the program. anybody have any solutions? or...
Gaming
problems uninstalling program completely. Help?
I had the simulator lock-on patched up to its latest with flaming cliffs 1.12b (1.12b required starforce activation and it asks to save the registry when you uninstall it but i have the original sf activation registry saved to reimplement it upon reinstall of the FC update) installed in my...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:14.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App