Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on start up


20 Nov 2012   #1

Windows 7 home premium 64bit sp1
 
 
BSOD on start up

Hi,
I get my bsod's on startup. Sometimes I am forced to restart. I have done the memtest about 8 passes no errors. I have tried window 7 memory test all ok there.
I have replaced my graphics card cause a video glitch. To a new evga gt650 and the drivers are updated. . I used the diagnostics tool provided by this forum, very cool. Here is my zipped file.

Thank you Jay...


My System SpecsSystem Spec
.

20 Nov 2012   #2

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Welcome to SevenForums

Perform a clean boot, see if that helps.
How does the computer boot up in safe mode?
My System SpecsSystem Spec
21 Nov 2012   #3

Windows 7 home premium 64bit sp1
 
 

I did a clean boot but some of the same bsod's were there. So I went to buy more ram. and so far clean boots. will check in the morning.

Thanks Jay
My System SpecsSystem Spec
.


21 Nov 2012   #4

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Please upload new reports
My System SpecsSystem Spec
22 Nov 2012   #5

Windows 7 home premium 64bit sp1
 
 

Ok finally my system has been booting ok. No problems to report at this time here is my new file. Let me know what you find if you can.

My problems were alway's during a cold boot.
I am going to return the other ram which I tested with memory test. About 8 passes and it never found errors but I admit never did the test from a cold boot.

Jay
My System SpecsSystem Spec
23 Nov 2012   #6

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

OK.

Please uninstall Norton for troubleshooting purpose, it's often a cause of blue screens.
Keep Microsoft Security Essentials for the time being.Remove these tools too:
Code:
Start Menu\Programs\GIGABYTE	Public:Start Menu\Programs\GIGABYTE	Public
Start Menu\Programs\GIGABYTE\EasySaver	Public:Start Menu\Programs\GIGABYTE\EasySaver	Public
You may install them back if we know they weren't contributing in the crashes.

Reinstall your graphic card drivers. The latest version of NVIDIA drivers are a little buggy. Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to; NVIDIA and reboot the system. Delete remnants of its drivers/older drivers using Driver Fusion/Sweeper
Download link:Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:
  • Click on the
  • Type CMD on Search
  • Left click and Run as Administrator
  • Type SFC /scannow
Full tutorial here:Run Disk Check on your hard disk for file system errors and bad sectors on it:Free up the start-up, nothing except the antivirus is usually needed.Run this tool and delete anything it finds:
*Let us know if the system is stable or not.


Then take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
Errors are sometimes found after 8 passes.
Do this test overnight, before going to bed.
My System SpecsSystem Spec
08 Dec 2012   #7

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Did any of the suggestions help?
My System SpecsSystem Spec
Reply

 BSOD on start up




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:28 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33