Bsod Windows 7 (64) Bit pls help

Okay, and have you reinstalled DirectX yet?

Remember to upload any new BSODs, hopefully you won't need to :)

Kk got more problems atm and my pc is driving me crazy ( im almost at the point of buying a new PC )

Code:

BugCheck 50, {fffffa80211b4bd0, 1, fffff80002aea7b5, 2}


Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt!PoIdle+1f5 )

Code:

Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS

Code:

BugCheck 4E, {99, 0, 0, 0}

Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

Code:

Usual causes:  Device driver, memory

Memory:

• RAM - Test with Memtest86+

Run Memtest86+ for least 7-8 passes, and preferrly overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

I would also run Driver Verifier to check for missing or corrupted drivers, run for least 24 hours, stop the test if any BSODs occur before this time frame.

• Driver Verifier - Enable and Disable

ty i run the driver Verifier atm going to run Memtest tonight.

Also do you have any clue what this problem can be kdbsync.exe doesn't work anymore i get this every time when im turning on my pc?

Could read some of the suggestions in this thread, I've only skim read through the posts, so don't know how much support the OP got with resolving their issue and if it was fully solved:

• Kdbsync.exe has stopped working?

Bad RAM modules and DIMM slots can contribute to programs not being able to work properly.

kk if run memtest al night and there where no errors.

Okay that's good, and is Driver Verifier running and produced any BSODs yet?

Got a new BSOD today ><

Code:

BugCheck 3B, {c0000005, fffff80002a80a60, fffff8800918e090, 0}

Probably caused by : ntkrnlmp.exe ( nt!KiInsertQueueApc+74 )

Code:

Usual causes:  System service, Device driver, graphics driver, memory

Update your BIOS (if possible):

Code:

American Megatrends Inc. 0506, 18-9-2009

Update ATI Radeon HD 4600 Series:

Code:

c:\windows\system32\drivers\atikmpag.sys (8.14.1.6264, 351,50 kB (359.936 bytes), 4-7-2012 7:10)

The driver dates back from July, the driver hasn't been updated, try using the AMD automatic driver detection service:

• AMD Driver Autodetect

What anti-virus program are you using?

Hard Drive:

• Disk Check
• CrystalDiskInfo - Software - Crystal Dew World
• SeaTools for Windows | Seagate

Post a screenshot of the Crystal Disk Info summary page:

• Screenshots and Files - Upload and Post in Seven Forums

Scan for corrupted or missing Windows files with:

• SFC /SCANNOW : Run in Command Prompt at Boot