Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Analysis Needed

25 Nov 2012   #1
Rmont11b

Windows 7 Ultimate 64-bit
 
 
BSOD Analysis Needed

Hey, title says it all. Was gone for about a week, when I came home, my computer ran for about 2-3 hours and then the blue screens started. Have been getting them upon reboot and within 5-10 min of reboot. Here is my analysis...

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 00000000000600dd, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
 bit 0 : value 0 = read operation, 1 = write operation
 bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002efe0c5, address which referenced memory
Debugging Details:
------------------
 
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800030fd100
 00000000000600dd 
CURRENT_IRQL:  2
FAULTING_IP: 
nt!KeStackAttachProcess+115
fffff800`02efe0c5 f00fc186dc000000 lock xadd dword ptr [rsi+0DCh],eax
CUSTOMER_CRASH_COUNT:  1
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xA
PROCESS_NAME:  System
TRAP_FRAME:  fffff88008992770 -- (.trap 0xfffff88008992770)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000008 rbx=0000000000000000 rcx=fffffa800c36c0a0
rdx=fffff88008992a58 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002efe0c5 rsp=fffff88008992900 rbp=fffff88008992a58
 r8=fffffa800c36c090  r9=0000000000000130 r10=fffff880033d80c0
r11=fffffa800c36c040 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
nt!KeStackAttachProcess+0x115:
fffff800`02efe0c5 f00fc186dc000000 lock xadd dword ptr [rsi+0DCh],eax ds:3e30:00000000`000000dc=????????
Resetting default scope
LAST_CONTROL_TRANSFER:  from fffff80002ecd569 to fffff80002ecdfc0
STACK_TEXT:  
fffff880`08992628 fffff800`02ecd569 : 00000000`0000000a 00000000`000600dd 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`08992630 fffff800`02ecc1e0 : fffff880`089927b0 fffff8a0`0cef3e30 00000000`00000039 fffffa80`0c36c040 : nt!KiBugCheckDispatch+0x69
fffff880`08992770 fffff800`02efe0c5 : 00000000`00000000 fffffa80`0c36c040 fffffa80`0c36c040 fffff800`0319c8e3 : nt!KiPageFault+0x260
fffff880`08992900 fffffa80`0a2f49c8 : fffff880`08992a80 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KeStackAttachProcess+0x115
fffff880`08992980 fffff880`08992a80 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0xfffffa80`0a2f49c8
fffff880`08992988 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0xfffff880`08992a80
 
STACK_COMMAND:  kb
FOLLOWUP_IP: 
nt!KeStackAttachProcess+115
fffff800`02efe0c5 f00fc186dc000000 lock xadd dword ptr [rsi+0DCh],eax
SYMBOL_STACK_INDEX:  3
SYMBOL_NAME:  nt!KeStackAttachProcess+115
FOLLOWUP_NAME:  MachineOwner
MODULE_NAME: nt
IMAGE_NAME:  ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP:  503f82be
FAILURE_BUCKET_ID:  X64_0xA_nt!KeStackAttachProcess+115
BUCKET_ID:  X64_0xA_nt!KeStackAttachProcess+115
Followup: MachineOwner
---------
All help is greatly appreciated, in a time pinch! Thanks everyone.

Rob


My System SpecsSystem Spec
.
26 Nov 2012   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Welcome to SevenForums.

You will receive better help if all the files from the http://www.sevenforums.com/crashes-d...tructions.html are submitted.
My System SpecsSystem Spec
26 Nov 2012   #3
Rmont11b

Windows 7 Ultimate 64-bit
 
 

Yeah I read that, don't really have the ability to do much for the computer. Got the dump file and brought it to another computer for that bug report. I am running memtest's now, showing no errors.
My System SpecsSystem Spec
.

26 Nov 2012   #4
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

How does the computer work in safe mode?

Try booting into Safe Mode with networking and see if you're able to upload the files from there.
My System SpecsSystem Spec
26 Nov 2012   #5
Rmont11b

Windows 7 Ultimate 64-bit
 
 

Safe mode seems stable, it's in Memtest86+ pass 2 right now, what does that program from the other forum give that you don't get in the debug report?
My System SpecsSystem Spec
26 Nov 2012   #6
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

The log files and msinfo file have information of what's installed on your PC and whats going on in the background which can be used to match the situation and how they relate to your BSOD.

Sometimes BSOD-s are caused by problematic programs as well and not just hardware.
My System SpecsSystem Spec
26 Nov 2012   #7
Rmont11b

Windows 7 Ultimate 64-bit
 
 

Alright, I will let the Memtest go overnight, I read RAM is a common problem, and tomorrow I will try that guide to making posts. Was just hoping it was something obvious by some fortunate chance. Got to do some coding for a CSE project due Tuesday... Thanks for your help thus far.
My System SpecsSystem Spec
26 Nov 2012   #8
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Take your time, good luck.,
My System SpecsSystem Spec
28 Nov 2012   #9
Rmont11b

Windows 7 Ultimate 64-bit
 
 

Added the Zip files from the Diagnostic Tool, hope you are still around to help!
My System SpecsSystem Spec
28 Nov 2012   #10
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Yes I am.

What were the results from memtest? Do you use a antivirus?

I see none.
My System SpecsSystem Spec
Reply

 BSOD Analysis Needed




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Win7 startup delay... xperfview analysis needed.
Several weeks ago, my startup time went from about 30 seconds to about 3 minutes. Can't remember any specific event. LOOOONG black screen after Win7 login, with only the pointer on screen, for at least 90-120 seconds. Clearly, the attached xperfview shows a lot of nothing from about 38 seconds...
Performance & Maintenance
BSOD analysis needed 0x0000003d
Hi All, i keep getting this random BSOD, your help analyzing what's wrong will be greatly appreciated! thanks! My Spec - Ultimate x64 - self built system - What is the age of system (hardware). 9 month old
BSOD Help and Support
Another BSOD Dump file analysis needed please
Hey guys I just got a BSOD and was wondering if anyone could tell me the cause thanks in advance if anyone knows a good dump analysis program could you also give me a link .
BSOD Help and Support
BSOD analysis - Help needed - Thanks in advance
Windows 7 Ultimate x86 Original OS: XP Pro 32bit SP3 System: 2008-2009 parts (Just check my comp parts in my profile for more details) OS age: 1 week Notes: Been crashing a few days after the install - whocrashed notified me that its OS drivers that are crashing my PC. What can i do? Or is...
BSOD Help and Support
BSOD need help on analysis thank you
need your help sirs. very much appreciated
BSOD Help and Support
Crash Dump Analysis Needed
Hi guys, can you please help me on finding a solution for the BSOD i received several times a day? The BSOD appears while i try to shutdown or restart windows. By the way i am using ultimate edition of windows 7. thanks in advance.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:01.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App