Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Brand new computer, occasional BSOD, can't find any pattern

13 Dec 2012   #21
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

You have DV enabled, even after a clean install? Was there any reason? let us know.

Disable driver verifier.
Driver Verifier - Enable and Disable

FYI, the dump said,
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C1, {fffff98009e16ee0, fffff98009e16652, 30118, 23}

Probably caused by : memory_corruption ( nt!MiCheckSpecialPoolSlop+9a )

Followup: MachineOwner
---------
According to Carrona.org,
Quote:
STOP 0x000000C1: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
Usual causes: Device driver, Memory
But, even Driver verifier is not able to point any driver out as the cause of the crash, so you need to test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight, per RAM module per slot.

Let us know the results after doing these two.


My System SpecsSystem Spec
.
13 Dec 2012   #22
zap514

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by Arc View Post
You have DV enabled, even after a clean install? Was there any reason? let us know.

Disable driver verifier.
Driver Verifier - Enable and Disable

FYI, the dump said,
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C1, {fffff98009e16ee0, fffff98009e16652, 30118, 23}

Probably caused by : memory_corruption ( nt!MiCheckSpecialPoolSlop+9a )

Followup: MachineOwner
---------
According to Carrona.org,
Quote:
STOP 0x000000C1: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
Usual causes: Device driver, Memory
But, even Driver verifier is not able to point any driver out as the cause of the crash, so you need to test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight, per RAM module per slot.

Let us know the results after doing these two.
Okay, a couple of days ago i ran memtest86, passed 12 times with all 4 sticks installed, does it make a difference to test the sticks individually?
My System SpecsSystem Spec
13 Dec 2012   #23
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

If there is an error in a single disc, it must be accounted in when all the modules are tested together. Isn't it?

In case, just disable DV and observe if any problem is occurring further. Though I am curious why you have enabled DV even after a clean install.
My System SpecsSystem Spec
.

13 Dec 2012   #24
zap514

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by Arc View Post
If there is an error in a single disc, it must be accounted in when all the modules are tested together. Isn't it?

In case, just disable DV and observe if any problem is occurring further. Though I am curious why you have enabled DV even after a clean install.
I Thought driver verifier might serve a purpose in finding out if any of the drivers for the internal components is bad, I have had it turned of as well but i get blue screens regardless.

Im currently running HCI Memorytest to see if that finds any problems that memtest86 did not. Will post back results tomorrow
My System SpecsSystem Spec
14 Dec 2012   #25
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

If it is not crashing on itself, better you dont compel it to crash
My System SpecsSystem Spec
18 Dec 2012   #26
zap514

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by Arc View Post
If it is not crashing on itself, better you dont compel it to crash
Oh, I think you missunderstood me. It DOES crash even without verifier running. I have run memtest86 and HCI memtest.
Both for a long time with multiple passes (14 in memtest86, 7 in HCI memtest). Since then i have also formated and reinstalled the OS multiple times, but nothing seems to fix my problem . Just minutes ago I got a new crash..
This time, to ensure there was no external component responsible for crashing my computer I hooked the computer up to my HDTV, new plugnplay mouse and keyboard and used a 3G-usb dongle for network. Ive only ran windows updates, only those listed as "important" and then installed Firefox, VLC and MSE.
.The 3G-usb dongle keeps acting weird now also, disconnects like every 5 minutes..
I have attached the dmp file
My System SpecsSystem Spec
19 Dec 2012   #27
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

upload your MSINFO32.nfo file.
  1. Click on the start button
  2. Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
  3. File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
  4. Give the time for processing, it will save a .nfo file on your desktop.
  5. Zip it, and upload it following the instruction.
I need to see some of the other information. The crash dump is totally silent about anything.
My System SpecsSystem Spec
19 Dec 2012   #28
zap514

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by Arc View Post
upload your MSINFO32.nfo file.
  1. Click on the start button
  2. Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
  3. File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
  4. Give the time for processing, it will save a .nfo file on your desktop.
  5. Zip it, and upload it following the instruction.
I need to see some of the other information. The crash dump is totally silent about anything.
There you go
My System SpecsSystem Spec
19 Dec 2012   #29
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Code:
HUAWEI Mobile Connect - 3G Network Card
They dont have any latest drivers as far as I know. Better you get a PCIe wifi card that you will be able to install in the computer.
My System SpecsSystem Spec
19 Dec 2012   #30
zap514

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by Arc View Post
Code:
HUAWEI Mobile Connect - 3G Network Card
They dont have any latest drivers as far as I know. Better you get a PCIe wifi card that you will be able to install in the computer.
Well, I am not sure if that will help me unfortunately , I just got a new BSOD, the 3G device is no longer even connected to the computer.

I have attached the new dmp.
My System SpecsSystem Spec
Reply

 Brand new computer, occasional BSOD, can't find any pattern




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD when computer idle (or no pattern)
Resently I've been getting BSOD almost daily. After they started I reinstalled everything with the help of ASUS recovery disks, but no luck there. So far I haven't been able to detect any pattern, except maybe for the fact that they seem to happen when my computer is idle, for ex when left on for...
BSOD Help and Support
Random BSODs, Can't Find a Pattern
Hi all, I've been getting intermittent BSODs with various messages - 13 in the last 2 months according to Blue Screen Viewer. The crashes seem to happen fairly randomly, although when I get MEMORY_MANAGEMENT it does at least seem to be when the computer is in use. Also (no idea if related)...
BSOD Help and Support
BSOD happen everytime when computer is on, no pattern, random.
Hello everyone, i bought the computer about 2 years ago, it has been working great until one day, BSOD just randomly appeared and it became worst and worst, now i can not do anything with the laptop as BSOD happens so often. When it first happened, i do not recall if i install any new software or...
BSOD Help and Support
Random BSOD on laptop, can't find a pattern
Hi, This is the laptop that I have: ASUS - Notebooks- ASUS U46E I have the i5 version, with a 750GB hard drive that I now put in an optical bay caddy (2nd HDD / SSD Caddy, Asus U41sv, U43jc, U46e, U47a, U50vg, U56e - $44.75 : NewmodeUS, Hard Drive Caddys for Notebooks) as a storage drivea...
BSOD Help and Support
System Crashes and occasional BSOD with no clear pattern
About two months ago my system started giving me problems, first time in the 4 years since I built it. At first it was just an occasional freeze then a random reset. It then progressed to a BSOD that mostly disappeared before I could read. "IRQL not less then or equal" appeared a couple of times...
BSOD Help and Support
Frequent BSOD's, can't find a clear pattern. dump attached
Hi there crash experts. Have been encountering pretty random BSOD's on a family PC. Can't find a clear pattern in behavior which would lead to this happening. Would you mind taking a look? I'm out of ideas and analyzing BSOD's is definitely not one of my greatests strenghts...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:27.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App