Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD while playing, ntoskrnl.exe

27 Feb 2013   #61
catch22

Win7 Professional x64
 
 

Aced the Intel Burn test on Standard, High and Very High x 5, All threads.


I think we're at the point where we have to examine my computers behavior.. I mean, it hasn't been like this (not wanting to boot, bluescreen every day while idle) a very long time.. I'm not sure what to make of this.. Might need to run memtest again or run a while with only 2 sticks


My System SpecsSystem Spec
.
27 Feb 2013   #62
catch22

Win7 Professional x64
 
 

Yes, I have. I will try sfc again though, for the helluvit.

Insufficient space should be of no concern, 40gb + free on main disk and space in the TB range on other disks. RAM should be fine as far as I know, rolling with 16Gb..
My System SpecsSystem Spec
27 Feb 2013   #63
x BlueRobot

 

Did you buy the RAM in sets or matched pairs, have you checked the motherboard's documentation? Some motherboards require the RAM to be installed in certain slots, and are only compatible with certain types of RAM.
My System SpecsSystem Spec
.

27 Feb 2013   #64
catch22

Win7 Professional x64
 
 

uh yeah, they were 2 x 4Gb or so, the RAMs should work with the motherboard, I have to doublecheck that..


SFC, I forgot to pull up a cmd windows so after it was done it just threw the terminal, rendering me unable to read. I found the logs for it and there's indications that stuff has been fixed although I might be reading it wrong. I am currently running a verifyonly to see if there are any (more) problems..


EDIT;

ACTUALLY, the EXACT type of memory i have wasn't listed in the specs.
My System SpecsSystem Spec
27 Feb 2013   #65
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Disable verifier now. The last crash dump, with verifier enabled, have not caught any device driver, and indicated to Memory corruption, as Harry pointed out. Rather the immediate earlier crash dump is highly interesting.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c000001d, fffff880016318ad, fffff88003fd0c50, 0}

Probably caused by : memory_corruption

Followup: memory_corruption
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c000001d, Exception code that caused the bugcheck
Arg2: fffff880016318ad, Address of the instruction which caused the bugcheck
Arg3: fffff88003fd0c50, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc000001d - {EXCEPTION}  Illegal Instruction  An attempt was made to execute an illegal instruction.

FAULTING_IP: 
Ntfs!NtfsGetIoAtEof+1d
fffff880`016318ad ff              ???

CONTEXT:  fffff88003fd0c50 -- (.cxr 0xfffff88003fd0c50)
rax=fffff88003fd16b0 rbx=fffff8a00161f690 rcx=fffff88003fd16b0
rdx=0000000000000000 rsi=fffffa80128535c0 rdi=fffff8a00161f690
rip=fffff880016318ad rsp=fffff88003fd1630 rbp=fffff88003fd1a00
 r8=0000000000031000  r9=0000000000010000 r10=fffffa800f6ef030
r11=fffff88003fd16b0 r12=fffff88003fd16b0 r13=0000000000010000
r14=fffffa801370a520 r15=0000000000000702
iopl=0         nv up ei pl nz na po cy
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010207
Ntfs!NtfsGetIoAtEof+0x1d:
fffff880`016318ad ff              ???
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  CODE_CORRUPTION

BUGCHECK_STR:  0x3B

PROCESS_NAME:  svchost.exe

CURRENT_IRQL:  1

LAST_CONTROL_TRANSFER:  from 0000000000000000 to fffff880016318ad

STACK_TEXT:  
fffff880`03fd1630 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : Ntfs!NtfsGetIoAtEof+0x1d


CHKIMG_EXTENSION: !chkimg -lo 50 -db !Ntfs
5 errors : !Ntfs (fffff880016310ba-fffff88001631c0a)
fffff880016310b0  ff  0f  84  96  00  00  00  41  3b  cb *2f  84  8d  00  00  00 .......A;./.....
...
fffff88001631600  5e  01  00  41  8a  8b  88  01  00  00 *cc  8b  4c  24  70  49 ^..A........L$pI
...
fffff880016318a0  da  48  8b  50  28  48  3b  53  70  0f *94  58  c3  ff  ff  48 .H.P(H;Sp..X...H
...
fffff88001631900  c1  48  8b  cb  e8  3b  8f  07  00  84 *e0  75  be  e9  ee  c2 .H...;.....u....
...
fffff88001631c00  33  c0  33  d2  48  8b  c8  ff  15  c3 *c2  03  00  48  85  f6 3.3.H........H..

MODULE_NAME: memory_corruption

IMAGE_NAME:  memory_corruption

FOLLOWUP_NAME:  memory_corruption

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MEMORY_CORRUPTOR:  STRIDE

STACK_COMMAND:  .cxr 0xfffff88003fd0c50 ; kb

FAILURE_BUCKET_ID:  X64_MEMORY_CORRUPTION_STRIDE

BUCKET_ID:  X64_MEMORY_CORRUPTION_STRIDE

Followup: memory_corruption
---------
It is either out and out memory corruption (so we need to know how many passes you have run the memtest, and at what stick - dimm combination; better you explain it) or something bad, say a virus. As another test, scan the system for possible virus infection.
Let us know the results of the scans, and the details of memtest.
My System SpecsSystem Spec
27 Feb 2013   #66
catch22

Win7 Professional x64
 
 

I just want to say again, thanks for your perserverance, I'm humbled by your will to help!

The memtest ran for 7-10 passes on each stick, about 4 hrs or something. However, since the modules arent supported by the motherboard, and i use 2 different (8Gb Corsair vengeance low profile, 8Gb regular corsair vengeance, same timings) in dual channel mode, it might have to do with that aswell?

I will conduct a more indepth memory check overnight to ensure they are ok.

Kaspersky's tool came back clean..
My System SpecsSystem Spec
27 Feb 2013   #67
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by catch22 View Post
I just want to say again, thanks for your perserverance, I'm humbled by your will to help!

The memtest ran for 7-10 passes on each stick, about 4 hrs or something. However, since the modules arent supported by the motherboard, and i use 2 different (8Gb Corsair vengeance low profile, 8Gb regular corsair vengeance, same timings) in dual channel mode, it might have to do with that aswell?

I will conduct a more indepth memory check overnight to ensure they are ok.

Kaspersky's tool came back clean..
If you know that the modules are not supported by the motherboard, use RAM that are supported. Hopefully the problem will not occur again.
My System SpecsSystem Spec
27 Feb 2013   #68
x BlueRobot

 

The incompatible RAM may be the problem, have you got warranty for the RAM or any returns policy still remaining?
My System SpecsSystem Spec
27 Feb 2013   #69
catch22

Win7 Professional x64
 
 

Well from what I've read, the vengeance and mobo should workfine, iit's just that the modules arent certified with the mobo because it wasn't out at the time the mobo was introduced. So I guess the memory is ok. I'm running my first pass now with a single module in.. Still weird boots at times, it's like the computer starts but no peripherals are recognized.. It stays on for like 5 seconds then reboots. Sometimes it boots sometimes it doesn't.. I don't know what to make of this. .
My System SpecsSystem Spec
28 Feb 2013   #70
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Why are you not trying with some matching RAM?
My System SpecsSystem Spec
Reply

 BSOD while playing, ntoskrnl.exe




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD playing a game ntoskrnl.exe
Hi, I have had my new computer since June, It is a new Haswell one and I use the integrated graphics. Over the last 3 months there has been a few random crashes but not many, it has performed well but the graphics driver sometimes crashes and when it does it says its for windows 8 not windows 7....
BSOD Help and Support
BSOD Ntoskrnl.exe whilest playing LoL
Heya, This will be my first post after a lot of lurking, I hope you guys dont mind me posting this as a first post though. A few days ago, my League of Legends got corrupted, when I started the game things you normally should have been able to see were missing. So I tried reinstall the game,...
BSOD Help and Support
BSOD playing various games, ntoskrnl.exe
I have a custom built PC that, for the past 3 years or so, has run fine. I haven't changed any hardware in the last year or so. As of 11/26, I've been getting BSOD after running video games for varying lengths of time (ten minutes to an hour) on a pretty consistent basis. When not running games, I...
BSOD Help and Support
BSOD playing bf3, hal.dll hal.dll+12a3b , ntoskrnl.exe ntoskrnl.exe+18
i am having this problem after i change my video cards i upgraded a 460 SLI to a 680 i have run 3dmark11 to try to replicate the bsod or something and nothing happends i clean my hardware and change the thermal compound then i played some bf3 and paff the same bsod =( pd: sorry for my english...
BSOD Help and Support
BSOD Playing APB Reloaded ntoskrnl.exe
...
BSOD Help and Support
BSOD while playing Battlefield 3, ntoskrnl.exe
I play Battlefield 3 for anywhere from 5-25 minutes and get a BSOD :sarc: I attached the minidumps.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App