Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD - Fresh PC Build

30 Nov 2012   #11
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

In addition, make sure the RAM has the correct setting in your BIOS per the label on it.
This is only an example.

Attachment 243806


My System SpecsSystem Spec
.
08 Dec 2012   #12
Metalmonkey47

Windows 7 Ultimate 64Bit
 
 

Thanks for the suggestions guys, I've been really behind on this since I'm always busy on my computer, and never have time to pull it out and move ram around to test it.

I finally got in a position to do some work on it, and removed my second stick of ram, just to see how it ran. I've been going the last 3 days on the single stick in the primary slot, after checking and verifying that all my clock speeds were correct as well as voltage.

AsRock has specifically mentioned that if running a single stick of ram, to run it in slot A1 or B1. Running my first slot in A1 had NO issues whatsoever. No BSOD for 48 hours straight. I JUST removed that stick, and inserted the other into slot B1 (3rd over) and after restart instantly saw BSOD twice. Once for Memory management as expected, and one for 'APC Index Mismatch' which was absolutly new to me. I'm going to get the dump file and add it here in just a moment. Can anyone shed some light here? It would appear that either the second stick of ram is no good, or my B1 slot is no good. But why the new BSOD error?
My System SpecsSystem Spec
08 Dec 2012   #13
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

What where you doing during the time of the crash?
My System SpecsSystem Spec
.

08 Dec 2012   #14
Metalmonkey47

Windows 7 Ultimate 64Bit
 
 

That particular instance I believe I was just logging on after making the initial ram changes.
My System SpecsSystem Spec
08 Dec 2012   #15
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

That's normal and that dump didn't reveal anything specific.
Any other BSOD-s?
My System SpecsSystem Spec
08 Dec 2012   #16
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Try each memory DIMM in each slot, as in the memtest tutorial.
My System SpecsSystem Spec
Reply

 Multiple BSOD - Fresh PC Build




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Multiple BSOD Multiple Drivers - Fresh Install (atikmdag.sys = main)
Hi, i had been having issues with bluescreens once every week or so. I took action by updating my drivers etc but this did not fix the issue. I re-installed windows and got all my drivers on and such yet the problem persists with more bluescreens, more often and with more driver causes. Before the...
BSOD Help and Support
New Custom Build, Fresh Win7 install, BSOD issues ntoskrnl/win32k
Hi 7Forums, I recently bought a new computer from a pc build website. I installed Win7 HP 64bit and started to instantly experience BSODs. After a bit of diagnostics, memtest told me that one of the RAM sticks was horrifically broken, that has since been sent off for replacement and the...
BSOD Help and Support
BSOD on a fresh build pcw.sys
I just installed a fresh install because I couldn't figure out the BSOD causes on my old build. New install is pretty basic, but I just can't get a stable system to save my life. WhoCrashed suggest its a driver issue, but could it be a hardware problem? Memory and HDD tested fine. It...
BSOD Help and Support
Fresh Build - Constant BSOD - Multiple Codes - 3b, 50, a
Hi All, After my last rig decided to stop working I decided to build a new one and start fresh. Would randomly turn off (not BSOD) and take multiple tries to turn back on My new rig is based off a PCGamer build, so I know components should work well together: OS: Windows 7 Ultimate x64...
BSOD Help and Support
Random BSOD's since fresh build. Error 0x0000001e.
Hello everyone. I built a computer about a month ago and ever since the first attempt to install windows it has been giving me blue screens. The computer is working someone fine most of the time now, but still has a daily to twice a day blue screen error. I have done everything that google has...
BSOD Help and Support
BSOD fresh PC build, IRQL not less or equal
Built this pc yesterday and have been having issues with BSOD. It seems to only have started after I installed the drivers for my Steinberg Ci1 USB audio interface. I unplugged the usb and haven't been running the audio interface but the BSOD still happens. I tried finding anything useful in the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:27.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App