BSOD Critical_Object_Termination 0x000000f4

1: kd> lmvm atikmdag
start             end                 module name
fffff880`048f1000 fffff880`0530d000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Tue Jun 26 22:04:19 2012 (4FE9DD83)
    CheckSum:         009C94A0
    ImageSize:        00A1C000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

• Download AMD Catalyst Drivers 12.10 Vista 64 - FileHippo.com

• AMD Driver Autodetect

• CrystalDiskInfo - Software - Crystal Dew World
• http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

• http://www.sevenforums.com/tutorials/433-disk-check.html

• Hard Drive Diagnostic Procedure

• Click on the rb:
• Type CMD on Search
• Left click and Run as Administrator
• Type SFC /scannow

• http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

• Microsoft Security Essentials - Free Antivirus for Windows
• Malwarebytes - The Free version
• http://www.sevenforums.com/system-security/206705-good-free-system-security-combination.html

• http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.

Click to expand...

• SeaTools for DOS
• SeaTools for DOS tutorial