Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD different codes caused by ntkrnlmp.exe

02 Dec 2012   #1
DrSeuss

Windows 7 (64 bit)
 
 
BSOD different codes caused by ntkrnlmp.exe

Hello
I have a

Mother Board: M4A88T-V evo/usb (I have checked the capacitors the board looks fine)
Raid Max RX-730SS power supply 720 W (Haven't had any problems however if I try to connect a third HDD with my blue ray, ssd and first HDD my computer wont start)
Main Hardrive Samsung 120 Gig SSD 830 series (This is my third SSD my two other OCZ SSD's died)
Hard Drive One: 1Tb Seagate Baracuda
Hard Drive Two:2 Tb Seagate Baracuda MD001-1CH164
CPU: AMD|PH II X6 1090T 3.2G AM3 RT
RAM:MEM 2Gx2|CORSAIR CMX4GX3M2B2000C9 R

Self build two years ago

I started getting BSOD about a month ago. I thought nothing of a few but then they became more frequent. Eventually my computer was crashing regularly to the point I would be doing work and it was crashing time and time again in a 24 hr period. I noticed that after it crashed I would need to either repair boot or or boot into safe mode before it would boot normally again. But even at that it almost always crashed within a hour or two.
I ran memtest 64+ for 8 passes
and windows memory diagnostic without a single error
I uninstalled avast but nothing changed.
Eventually I reinstalled windows and everything was running fine until I installed skype.
So I uninstalled skype but needed windows fix to do it as I couldn't uninstall without running the fix. The blue screens were not as frequent and generaly I can boot into windows directly after I have one now. But when I run windows debugger it points to ntkrnlmp.exe .This was one of the errors I was getting before but I was getting many more different error codes now this seems to be the one coming up.
I generaly haven't been having as many problems then I ran chkdsk on my hard drive (not the one I am running OS from) at 20% it crashed twice so I ran defrag and it went through the whole process without crashing. Then I ran sfc/scannow and at a certain point in the beggining it crashed. I bought a new hard drive disconnected my old one and ran sfc/scanow again it went for longer but then crashed again.

I am at the end of my rope I am in finals and have a lab report due.

Thanks in Advance I really don't know what else to do.
I have uploaded all recent minidumps after the windows install.

Thanks

Ryan


My System SpecsSystem Spec
.
02 Dec 2012   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hello DrSeuss.

It is caused by Avast.
Code:
fffff880`09beb9b8  fffff880`02c3b581Unable to load image \SystemRoot\System32\Drivers\aswSnx.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
 aswSnx+0x3581
Description here: http://www.carrona.org/drivers/driver.php?id=aswSnx.SYS
Code:
fffff880`09beb398  fffff880`0417bf00Unable to load image \SystemRoot\System32\Drivers\aswSP.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSP.SYS
 aswSP+0x55f00
Description here: Driver Reference Table - aswSP.SYS

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download and install those, and then run full system scans with both of them, one by one.

Some Disc/file system errors are also there. Do some disc checks.
  1. Update your SSD's Firmware (Skip it, if it is not a SSD)
  2. Re-seat the sata and power.
  3. Run chkdsk /f/r, following the option two of the tutorial Disk Check
  4. Seatool for dos: SeaTools | Seagate download
    Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
As the antivirus failed, for safety reason, scan the system for possible virus infection.
Let us know the results.
My System SpecsSystem Spec
02 Dec 2012   #3
DrSeuss

Windows 7 (64 bit)
 
 

Hi Arc

Thanks for your time and the quick reply.
I uninstalled Avast. When rebooting to complete the unistall it crashed.
I then installed Microsoft Security Essentials and ran a scan.
When I downloaded MalwareBytes it crashed a couple times and then again when I tried to run a scan. Here are the dumps I am now running a scan using malware bytes seems to be working right now.

Thanks
My System SpecsSystem Spec
.

03 Dec 2012   #4
DrSeuss

Windows 7 (64 bit)
 
 

Hello

Thanks again for the help.
So I ran all the test you told me too.
I uninstalled avast.
Installed windows Security essentials and MBam then scanned my system using both of them found two alerts and deleted both of them with MBAM.
I checked the firmware for my SSD and it was up to date.
I then ran chkdsk/f/r which came back clean
then i downloaded sea tools and ran the scan came back clean.
I also used anti rootkit which came back clean.
I am waiting until tonight to do the windows defender boot.
Things seemed to be going well then the system crashed again.
Ill post the mini dump.

I will run Defender tonight and post if anything comes up.

Thanks I really appreciate the help

Ryan
My System SpecsSystem Spec
03 Dec 2012   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi Ryan, congrats that you have performed all those hard process nicely, but it is very bad that it crashed again. What is even bad that it is showing the Ntfs error again
Code:
fffff880`0314aca0  fffff880`012216d8 Ntfs!NtfsFspDispatch
fffff880`0314abc8  fffff880`0122196c Ntfs!NtfsFspDispatch+0x294
fffff880`0314ab88  fffff880`0124f2c0 Ntfs!NtfsCancelOverflowRequest
fffff880`0314ab08  fffff880`012bb807 Ntfs!NtfsCommonClose+0x9c4
Waiting for the result of WDO scan. Hoping it will give us a guideline what we are to do next to fight those crashes.
My System SpecsSystem Spec
03 Dec 2012   #6
DrSeuss

Windows 7 (64 bit)
 
 

Hi Arc
Just thought I'd give you a update.
I ran windows defender offline from mt boot and it came back clean. However the first time I ran it, it came back with a error. Upon another boot it ran the fulls scan and was clean. After I ran it the computer crashed several times some right after a crash and it even crashed trying to enter safe mode which hadn't happened before. I ran boot repair and it booted into windows but there were no words under tghe icons and I couldn't click on anything. The mouse would move though. I'm really sorry i forgot to mention I have a small video card Radeon HD 5450. Thought at first it might be the problem and then I removed it and I still had the same problem so I don't think it is. All the drivers are up to date I re-installed them when i did the fresh install.

Thanks again

Ryan
My System SpecsSystem Spec
04 Dec 2012   #7
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Do some hardware tests?

► Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight, per RAM module per slot.

► Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

► Stress test the CPU.
Hardware - Stress Test With Prime95

Upload a screenshot of Speccy Summery Tab.
Upload a screenshot using CrystalDisc Info.
My System SpecsSystem Spec
04 Dec 2012   #8
DrSeuss

Windows 7 (64 bit)
 
 

Hi Arc

I ran the Furmark test and it came back fine.
Then I tried to run the prime 95 test and almost immediately my computer crashed.
I thought it might be coincidence but then I tried to run it two more times and immediately it crashed. I ran it once from safe mode and it crashed again.

I am going to run memtest 85 again tonight. I ran it before and it went 8 passes clear with two sticks in but I will try it with one stick now.

I am uploading the screen shot as well as more minidumps.
A bizarre thing happened after one of the crashes the date and time in windows was changed to 5 days in the future and one hour back.
when the computer crashes now it is crashing 5 or six times back to back when booting.

Thanks for the help
My System SpecsSystem Spec
04 Dec 2012   #9
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Everything seems to be nice.

You uninstall Microsoft Security Essentials. Then run the Windows Defender Offline one more time, irrespective of the result. Then reinstall a fresh downloaded copy of Microsoft Security Essentials. There must be some problems with either any virus or the virus scanner itself.

And, it is giving some hardware error.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {10, 2, 0, fffff80002c842c9}

Probably caused by : hardware ( nt!SwapContext_PatchXSave+c8 )

Followup: MachineOwner
---------
Do the hardware tests I suggested, and upload your MSINFO32.nfo file.
  1. Click on the start button
  2. Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
  3. File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
  4. Give the time for processing, it will save a .nfo file on your desktop.
  5. Zip it, and upload it following the instruction.
My System SpecsSystem Spec
04 Dec 2012   #10
DrSeuss

Windows 7 (64 bit)
 
 

Hi Arc

I ran the hardware tests you asked for again and uploaded the MSINFO file. There was a reboot during the prime 95 test but no bluescreen. I ran the memtest 85 last night for both sticks of RAM individually in slot 1 with no errors. I will do the other slot tonight. I ran windows defender it came back clean and reinstalled a fresh downloaded copy of MS Security essentials.

Thanks for the help

Ryan
My System SpecsSystem Spec
Reply

 BSOD different codes caused by ntkrnlmp.exe




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD - probably caused by : ntkrnlmp.exe - Server 2008
Hi, I know it's not quite win7, but I'm hoping someone can help. The OS is Server 2008 SP 2 running as a Terminal Services server. About a week ago it started crashing with BSODs. The only recent change was installing a new Xerox workcentre network printer 3 days earlier. It crashed 5...
BSOD Help and Support
How to fix BSOD caused by ntoskrnl.exe and ntkrnlmp.exe
Here are the details: On Sun 4/22/2012 8:32:37 AM GMT your computer crashed crash dump file: C:\Windows\Minidump\042212-30638-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x1A3F8C) Bugcheck code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80002BEFF8C,...
BSOD Help and Support
BSOD multiple times. Caused by ntkrnlmp.exe.
Hi everyone, I've had the BSOD 5 or 6 times today and I'm at a lost on how to fix it. I've run the diagnostics and there's apparently nothing wrong. I've run a virus scan with Malwarebytes and nothing. I've tried to do a system restore however my system protection was turned off and so there...
BSOD Help and Support
BSOD caused by ntkrnlmp.exe
When I opened YouTube video, pc give me BSOD. Here is the dump file. I have uninstalled Flash Player using this method. Installed latest version. Using Firefox 9.0.1. Thanks, StalkeR.
BSOD Help and Support
Shutdown BSOD Probably caused by : ntkrnlmp.exe ???
I some one can help me to understand this BSOD when I shutdown my PC. HP 3074ca with Windows 7 x64 Thank you! Here my dump file: Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64 Copyright (c) Microsoft Corporation. All rights reserved.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App