Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 3b win32k BSOD from hardware upgrades

08 Dec 2012   #41
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

They won't send a new one, the warranty says it will be rebuilt. I got my same board back from them 3 times.

Yeah 38C is fine for a light load. Good idea to add a fan too, and I would recommend you install it as an intake, pump more cool air in.


My System SpecsSystem Spec
.
08 Dec 2012   #42
Tezzick

Windows 7 Home Premium 64bit
 
 

Ah makes sense.

Intake from the top? Don't think it will matter with the whole "heat rises" thing? I can't really install a front fan, maybe a side fan, actually. Side would probably be better for intake I think. Only thing is I'd have to put it somewhere else, because right now that side of the case is right against the side of my couch. (I have it in between two couches, but the other couch is pulled out so I have room to put it on its side.)
My System SpecsSystem Spec
08 Dec 2012   #43
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

My theory is to blow cool air in and push hot air out rather than hoping the case has enough holes so exhaust fans will pull in cool air. I have mine set up with a top intake which blows directly on the CPU cooler and the rear exhaust is pulling hot air right out.

I was going to suggest a side fan too, say, a large 200MM or so. It would bring cooler air right into the GPU and CPU and create positive pressure to help keep dust out better. You should keep at least a 4", 100MM clearance all around the case.
My System SpecsSystem Spec
.

08 Dec 2012   #44
Tezzick

Windows 7 Home Premium 64bit
 
 

Alrighty I can see the usefullness to that.
I was actually just looking at a Newegg TV video on 200mm fan, and looks to be the most useful fan (and easiest) to put onto my case.
I could, theoretically, just take off the side cover, drill a bunch of holes in some kind of "grill" fashion, then install a 200mm. I think I'll have to check this out...
Thanks for the tips man!
My System SpecsSystem Spec
09 Dec 2012   #45
Tezzick

Windows 7 Home Premium 64bit
 
 

Alright, over 24 hours, and then right as I'm watching an episode, right before bed, I get another system_service_exception 3b. Minidump provided. If its the video card drivers, could you tell me how exactly I should install them? It seems no matter what way I install them, they always get messed up...
Thanks
Attachment 244893
My System SpecsSystem Spec
09 Dec 2012   #46
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Nothing specific. Bcc 3B again.
It just crashed on object dock,
Code:
PROCESS_NAME:  ObjectDock.exe
My System SpecsSystem Spec
09 Dec 2012   #47
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Have you used Driver Sweeper to first remove all the old drivers? Get the newest one and save to your desktop first, unzip it to its own folder.

Run Driver Sweeper, then go to Device manager, Display adapter, it should have a yellow triangle on it. Right click, choose Update or Install driver, Browse My Computer. Point to the folder where you have the driver and OK.

This should install only the driver without the CCC which causes problems.

Link in my sig is a direct Driver Sweeper download form SF.

MS offers a Hotfix which may help.
http://support.microsoft.com/kb/2584454
My System SpecsSystem Spec
09 Dec 2012   #48
Tezzick

Windows 7 Home Premium 64bit
 
 

Alright, I haven't used Driver Sweeper, but I used the program that replaced it once. It didn't delete everything as you had to pay to get all the features so I didn't bother using again. I'll try that after I install the hotfix. I see it lists a few of the sys files that were listed before with these crashes.

Also just got a memory_management BCCode 1a:
Attachment 244957
My System SpecsSystem Spec
09 Dec 2012   #49
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Were the RAM adjustments/issues sorted?
The dump files are useless until RAM gets fixed. Damaged RAM causes crashes everywhere.
My System SpecsSystem Spec
09 Dec 2012   #50
Tezzick

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by koolkat77 View Post
Were the RAM adjustments/issues sorted?
The dump files are useless until RAM gets fixed. Damaged RAM causes crashes everywhere.
I thought they were, had no crashes for over 24 hours, but just got that 3b crash late last night and one more just now. I've tried contacting Gigabyte, but they apparently don't have customer support on weekends, so I have to wait until tomorrow.

Right now I'm installing the hotfix and some other windows updates.

Actually, I'll see if G.Skill can help me. Maybe they have customer support on weekends.

EDIT: Well, as usual, I have spoke too soon. What was that? 5 minutes? Another 3b. Would it be useful looking at its minidump now that I've changed a bunch of things for the memory and it might be fixed?
Whoops I'll put this in my newest post..
My System SpecsSystem Spec
Reply

 3b win32k BSOD from hardware upgrades




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Randomly BSOD on my new PC - win32k.sys (win32k+0xC4283)
Hello. Good Day to all. Permission to post. I just search for my problem and i didn't find any answers yet. I'm receiving a BSOD several times i keep getting BSOD mostly when browsing with google chrome. What i did so far : -I just installed whocrashed and found an error (you can see it in...
BSOD Help and Support
Recent upgrades to homebuild- now frequent BSOD
I recently upgraded graphics, memory and went to dual SSD's. New install Win7 ultimate 64bit. Have checked for and updated everything I could think of. I run program on computer or am surfing on web. screen locks up get message :loading security settings: then blank screen then BSOD with message (...
BSOD Help and Support
Crashing Randomly after hardware upgrades
Hi - I recently upgraded my desktop. Original hardwares: ASUS M4A78-E CPU: AMD Phenom II X4 940 Black Edition 3.0GHZ I changed the following hardwares: 500GB WD 7200rpm > 120GB OCZ SSD 4x1024 DDR2 > 2x4096 DDR2
BSOD Help and Support
BSOD after several upgrades.
Hi - I recently upgraded my desktop. Original hardwares: ASUS M4A78-E CPU: AMD Phenom II X4 940 Black Edition 3.0GHZ I changed the following hardwares: 500GB WD 7200rpm > 120GB OCZ SSD 4x1024 DDR2 > 2x4096 DDR2 GeForce 9800GT > XFX Radeon HD 6950
Drivers
BSOD with recent hardware upgrades
Recently after some new hardware upgrades I have been having trouble starting my system up, and when it does decide to start up, it often will blue screen after startup. After a few restarts it seems to be stable for a while. System: Windows 7 Home Premium 64x AMD Phenom II x4 965 Processor...
BSOD Help and Support
Vista x64 to Windows 7 X64 - Hardware upgrades???
Can anybody please tell answer the following query? I have the retail version of Vista X64 Ultimate which was installed originally. I then purchased the upgrade disc for Windows 7 ultimate and performed a clean install of win 7. It has been fine for nearly a year now, however I am now...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:42.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App