Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - Opening or attaching file using "File Open" menu

03 Dec 2012   #1
ssshenoy

Microsoft Windows 7 Ultimate 32-bit 7601 Multiprocessor Free Service Pack 1
 
 
BSOD - Opening or attaching file using "File Open" menu

I am having a BSOD problem whenever I try to open a file in MS Word or MS Excel using the "File Open" menu. This problem also occurs when I try to attach a file to a memo (in email using Internet Explorer) and use the "Browse" button and try to choose a file.
I have attached the zip file using the SF Diagnostic tool provided. My profile also has all the system details as per your recommendations above.
Please help.


My System SpecsSystem Spec
.
04 Dec 2012   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Welcome to SevenForums!

Bugcheck 1E and McAfee are common.

Code:
Start Menu\Programs\McAfee Public:Start Menu\Programs\McAfee Public
Start Menu\Programs\McAfee Online Backup Public:Start Menu\Programs\McAfee Online Backup Public
McAfee is a frequent cause of BSOD crashes, consider uninstalling it with the McAfee Removal Tool and replace with Microsoft Security Essentials at least to test.Make scans with the following:


-Kaspersky TDSSKiller:-ESET online scanner:Recommended antivirus program for Windows 7 based on stability compared to others:-

Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.


Go to this link: Intel® Driver Update Utility Check for the latest drivers update (Needs Java) and download all outdated drivers for your system.

POst back results, good luck

Code:
b031e000 b032c000   mfebopk.sys
b0300000 b031e000   mfeapfk.sys
b03ac000 b03c3000   USBSTOR.SYS
b0339000 b03a3000   spsys.sys
b02c9000 b0300000   mfeavfk01.sy
9c363000 9c37b000   parport.sys
8d4f7000 8d504000   crashdmp.sys
8d504000 8d50f000   dump_pciidex
8d50f000 8d519000   dump_msahci.
8d519000 8d52a000   dump_dumpfve
My System SpecsSystem Spec
05 Dec 2012   #3
ssshenoy

Microsoft Windows 7 Ultimate 32-bit 7601 Multiprocessor Free Service Pack 1
 
 
BSOD - "File open" menu - Status after 1st round

As per recommendations from Koolkat77, I have done the following steps:
  1. Uninstalled Mcafee software using Windows "Add/remove" programs
  2. Used Mcafee Uninstaller link below to completely remove Mcafee software
  3. used Kaspersky TDSSKiller -- No issues found
  4. Downloaded Microsoft Security essentials - Complete System Scan -- No issues found
  5. Intel drivers update utility - 2 drivers were downloaded to update it to latest version.
The problem still exists. When I try to open a file using "File open" in Word or excel, or when I try to browse for files to attach to a memo, BSOD takes place. It is very repeatable. I have captured another image of the instance after completing 5 steps above using the Diagnostic tool. Zip file attached.
Thank you for your help.
My System SpecsSystem Spec
.

05 Dec 2012   #4
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Upload a screenshot of your hard disk using crystal disk info and summary tab using Speccy:Make a hard drive test from the hard drive manufacturers website.Run Disk Check on your hard disk for file system errors and bad sectors on it:
My System SpecsSystem Spec
06 Dec 2012   #5
ssshenoy

Microsoft Windows 7 Ultimate 32-bit 7601 Multiprocessor Free Service Pack 1
 
 

Hello Koolkat..
Thank you very much for the tips... here is the status after following up on your recommendations:

-- Uploaded the speccy file for system information to this memo
-- Crystal Disk Info uploaded to this memo
-- Ran Disk Check on your hard disk for file system errors and bad sectors on it: No errors found.

Did not run a hard disk check using hardware manufacturers' website.. Assumed that running Disk check would suffice. If I still need to run, please let me know.
The problem still exits.
My System SpecsSystem Spec
07 Dec 2012   #6
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Can you post the screenshots please? Like upload them to the website as an image. It's hard to read the texts.

After uploading them take memtest:
Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
Errors are sometimes found after 8 passes.
Do this test overnight, before going to bed.
My System SpecsSystem Spec
Reply

 BSOD - Opening or attaching file using "File Open" menu




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
shortcut (lnk file) "Open File Location" not working
I have numerous picture sets in separate folders, and one folder that contains the shortcut to each folder's "cover.jpg" file. When I right click on one of the shortcut files and select "Open File Location" or select "Properties" and then click the "Open File Location" button, I'm taken to a...
General Discussion
"Open File Location" - Add or Remove from Context Menu
How to Add or Remove "Open File Location" and "Open Folder Location" from the Context Menu This will show you how to add or remove "Open File Location" and "Open Folder Location" from the context menu for all users in Windows 7 and Windows 8. This is when you right click on a shortcut of a...
Tutorials
add icon to context menu "Open File/Folder Location"
Is it possible to add icon to the entry Open File/Folder Location? I created expendable string value and name it Icon and then in value i inserted the path to the .ico file, but no icon is showing up.
Customization
File and Folder - Add "Hide" and "Unhide" to Context Menu
How to Add "Hide" and "Unhide" to File and Folder Context Menu in Vista, Windows 7, and Windows 8 This will add Hidden File Attributes and Hidden Folder Attributes to the context menu of files and folders for all users to be able to hide or unhide one or more selected file(s), folder(s), and/or...
Tutorials
"Open File - Security Warning" when running a LNK file
Ever since I started using Windows Live Mail, I get the following every time I start it: How do I stop this?
General Discussion
Context Menu of Jumplist Items Missing "Open file location"?
Is there anyway to add the "Open file location" to the context menus of files that appear in jumplists? For example, my media player is pinned to the task bar. Right clicking on it brings up the jumplist with a list of recent TV episodes I've watched. It would be nice to have the ability to...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:42.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App