Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD New system build, memory_management and kmod_exception_not_handle

12 Dec 2012   #11
Vinny1001

Windows 7 64 bit Professional
 
 

I have done both those scans now, and no threats were found. I have ran memtest in the past before and already found 2 of the 4 sticks I had were faulty, so i tested 2 sticks at a time, errors came up for one of the pairs, so I tested the two other sticks for 4-6 passes, twice, and no errors were found in those. I already returned the other 2 faulty sticks. I may try to run memtest again tonight then... to check a third time.

My computer seems to have errors if it's turned off for a long time, 'cause whenever I turn it back on, lets say in the morning after it has been off all night, it'll blue screen within the 30 minutes of being on, or have errors on start up such as nvvsvc.exe application error and once that came up, windows didn't even display my name to log into, and it didn't even pop up the bar to type my password in... but I just have to restart it then it's fine...

I think it's a faulty motherboard, this motherboard isn't any popular brand.

I never, ever, had these problems with my last build. No matter how I installed things either, no problems. Kaspersky also worked like a charm. No startup errors ever, either.

If I return this mobo, and buy a different one, and that one isn't faulty, would it be more (hopefully not less) compatible and not giving me all these bsod? What would you suggest? I'd want at least 2 pcie 3.0 slots and it be able to run fast ddr3 ram, 1155 slot for the ivy bridge i have. oh and did i mention, for it to actually work.. :\

But I will triple check my ram once again tonight. Other than that, I'm just about ready to RMA this mobo and try something else.

Thanks for the help so far once again, Arc, and Tew!


My System SpecsSystem Spec
.
12 Dec 2012   #12
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

After making it sure that the RAM sticks are problem free or not, decide about the motherboard. If the fresh RAM sticks work good with this board, then it is OK. To determine the faulty motherboard's slot, follow the memtest instruction of koolkat77 as per this post.
My System SpecsSystem Spec
13 Dec 2012   #13
Vinny1001

Windows 7 64 bit Professional
 
 

Quote   Quote: Originally Posted by Arc View Post
After making it sure that the RAM sticks are problem free or not, decide about the motherboard. If the fresh RAM sticks work good with this board, then it is OK. To determine the faulty motherboard's slot, follow the memtest instruction of koolkat77 as per this post.
I did some testing. For the blue screens I got, I had the 2 sticks in slots A2 and B2. So I decided if the computer was blue screening in those slots... why not put the 2 sticks in A1 and B1 and run memtest on those, because if no errors show up, then that narrows it down to the 2 bsod slots.

I ran memtest overnight and little in the morning, got 5% into the 9th pass, no errors for slots A1 B1

So this is a high chance, that these two sticks are not faulty.

I am going to memtest the two sticks again in the bsod slots and see if any errors come up. Then that will show it's the mobo slots are faulty.

In the meantime.. I am fed up with this mobo, so I am going to order a MSI one today, continue testing this one tonight, and if there are errors, not sure if I should get a replacement or still try the MSI one.

If this board shows no errors in the bsod ram slots.. I am just going to receive the MSI board and try that and get a refund on the asrock board.

I am thinking about ordering this board

Newegg.com - MSI Z77A-GD55 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS

What do you think about all this? Thanks for the help so far.
My System SpecsSystem Spec
.

13 Dec 2012   #14
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

The way you are proceeding the Memtest is just appropriate, continue it as you have planned.

The board you chose is a nice one, but my personal choice is intel board.
My System SpecsSystem Spec
13 Dec 2012   #15
Vinny1001

Windows 7 64 bit Professional
 
 

Quote   Quote: Originally Posted by Arc View Post
The way you are proceeding the Memtest is just appropriate, continue it as you have planned.

The board you chose is a nice one, but my personal choice is intel board.
Sorry to get off topic here.. but what's a good board you'd suggest? I'm looking for a ATX, sata 6gb/s some usb3.0 slots, two 3.0 pcie slots, intel 1155 socket for my ivy bridge. ddr 1600 mhz. reliable mobo and good for gaming, and possibly, not required, good for overclocking. I don't have my current set up overclocked but my old PC was, so in case I ever wanted too, but it's not necessary.

Willing to spend around $150

and to mention, one that works well :P

I'm quickly asking this so I can figure out what to order in for today. Thanks so much for the help, really appreciated
My System SpecsSystem Spec
13 Dec 2012   #16
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

OK, I am asking my friend Britton30, who is a hardware guru
My System SpecsSystem Spec
13 Dec 2012   #17
Vinny1001

Windows 7 64 bit Professional
 
 

Quote   Quote: Originally Posted by Arc View Post
OK, I am asking my friend Britton30, who is a hardware guru
ok, thanks!
My System SpecsSystem Spec
13 Dec 2012   #18
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Here's a list with your specs. Personally I would choose one of the ASUS board within your budget. I've had bad luck with ASRock and gigabyte motherboards. Of course your mileage may vary.
My System SpecsSystem Spec
13 Dec 2012   #19
Vinny1001

Windows 7 64 bit Professional
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Here's a list with your specs. Personally I would choose one of the ASUS board within your budget. I've had bad luck with ASRock and gigabyte motherboards. Of course your mileage may vary.
I am sorry I do not see any list?
I was looking through asus boards as well!

I am deciding between this Asus board
Newegg.com - ASUS P8Z77-V LK LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS

and the MSI board I posted earlier
Newegg.com - MSI Z77A-GD55 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS

I'm leaning towards the MSI one after reading some reviews.

Would either be fine? They're very similar. I've read lots of reviews on asus boards having lots of problems with faulty parts, over MSI, although that could just be because asus has more reviews. Opinions?

Thanks for the help, shortly I have work but I will be ordering one of these when I get home.
My System SpecsSystem Spec
13 Dec 2012   #20
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Sorry, I forgot the link.

If I was doing it I'd get the ASUS, I know pro builders who have to be forced to use MSI boards. That ASUS is a solid one and can give you nice OC options.The list. http://www.newegg.com/Product/Produc...odeId=1&name=2
My System SpecsSystem Spec
Reply

 BSOD New system build, memory_management and kmod_exception_not_handle




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD over and over with brand new system build...
Hello all, I saw the YouTube video saying to come here for help with BSOD concerns. I've attached what I understand to be dump files. Sure hope someone out there can help identify if I have hardware or driver issues. Any guidance is greatly appreciated, as I'm getting ready to pull my hair out...
BSOD Help and Support
Third BSOD and system reboot on new build
I have just had the third known bsod on this new PC build. running Win7 Ultimate 64bit.
BSOD Help and Support
New build memory_management BSOD (0x0000001a)
Hi I've recently finished a new build but for the first 2 boots of every day I get the memory_management BSOD and then I will not happen again until the next day no matter what I do. I have also had the Page Fault in Nonpaged Area BSOD and multiple process exceptions if window actually starts...
BSOD Help and Support
BSOD on new system build
Hello all! this is my first time posting in this forum. Unfortunately its about a problem that has been depressing me quite a bit. I just built a new system last friday with the following specs: Intel Core i5-2500 ASUS P8P67-M PRO,P67 (Rev 3.0) G.SKILL Ripjaws Series 4GB (2x2gb) Galaxy...
BSOD Help and Support
BSOD with new system build, any help appreciated!
Hi there, I built a new system last week and ever since have been getting random bsods, one every day or so. I have read the forum and tried some of the items suggested - memtest seems ok, system check and chkdsk are fine. Attached are my diag files, any help gratefully received! - Windows...
BSOD Help and Support
New system build BSOD
Just finished a new system build using components all less than 6 months old. Running OEM Windows7 Home x64. Burned in over three days with Prime95 and then 5 runs of Memtest86 with no issues. Loaded CS3 Photoshop last night and then turned on unit today. Within 5 min. ,experienced two BSOD's...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:14.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App