Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Numerous BSoDs hitting randomly

12 Dec 2012   #11

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

What antivirus do you use?

Make scans with the following:

Quote:
-Kaspersky TDSSKiller-ESET online scanner
Quote:
MSE is recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software:-
1. Microsoft Security Essentials - Free Antivirus for Windows
2. Malwarebytes - Free
3. Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.


My System SpecsSystem Spec
.

13 Dec 2012   #12

Windows 7 x64
 
 

The antivirus I use to Malwarebytes

I ran TDS and ESET, I didn't find any roots however there were 17 infected files I found so far.
I doubt there's any point to it but figured I'de post them up anyways, so here are the viruses found.
8 - "A variant of Win32/Kryptik.PQF trojan" (4 of which were unable to be cleaned)
1 - "Win32/TrojanDownloader.Tracur.F trojan"
1 - "Win32/Adware.Yontoo.B application"
1 - "a variant of Java/TrojanDownloader.Agent.Me trojan"
2 - "a variant of Java/TrojanDownloader.OpenStream.NCM trojan"
2 - "Java/TrojanDownloader.OpenStream.NCM trojan"
1 - "Win32/TrojanDownloader.Tracuf.F trojan"
1 - "JS/Agent.NDB trojan"


I'm currently running Malewarebytes full scan so we'll see if there are any others hidden around.
My System SpecsSystem Spec
15 Dec 2012   #13

Windows 7 x64
 
 

I haven't seen too many BSoDs recently, however sometimes I go to start up my computer there will be a red light that turns on from my motherboard and my computer wont display to the monitors. If I leave it running it will eventually display, it doesn't start booting up until there is display though. I'm still convinced it either my PSU or GPU crapping out
My System SpecsSystem Spec
.


27 Dec 2012   #14

Windows 7 x64
 
 

Here's another grab all scan. I think the crashes are occurring when my computer starts to use more ram. (Like I said earlier they mostly occur when I'm playing games) I ran memtest+ and all 4 sticks passed however. Is it possible that there is a faulty slot in the motherboard, or the voltage is messed up in the bios? Currently I have them set at 1600mhz @ 1.5v

I'm still dumbstruck with what's going on, every time I think I have it figured out I get hit again.
My System SpecsSystem Spec
27 Dec 2012   #15

Windows 7 ultimate x64
 
 

You need to memtest for at least 8 Passes for each stick ... Have you done that ??
My System SpecsSystem Spec
27 Dec 2012   #16

Windows 7 x64
 
 

Quote   Quote: Originally Posted by centaur78 View Post
You need to memtest for at least 8 Passes for each stick ... Have you done that ??
Yes


/edit: I should have stated this in the last post. The main reason I think it could be related to my RAM is because on my motherboard there is a red led named [DRAM_LED]. After some of the crashes this light will switch on (sometimes it will blink) and my computer won't boot until it turns off.
My System SpecsSystem Spec
28 Dec 2012   #17

Windows 7 x64
 
 

"a driver has overrun a stack-based buffer"

Is it possible one of my drivers is causing the problem? The last two crashes I had displayed that text.
My System SpecsSystem Spec
28 Dec 2012   #18

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Code:
FAILURE_BUCKET_ID:  X64_0x3B_nt!NtAllocateVirtualMemory+bd6

BUCKET_ID:  X64_0x3B_nt!NtAllocateVirtualMemory+bd6
Have you run memtest on each stick individually?

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Do this test overnight, before going to bed.
My System SpecsSystem Spec
28 Dec 2012   #19

Windows 7 x64
 
 

Quote   Quote: Originally Posted by koolkat77 View Post
Code:
FAILURE_BUCKET_ID:  X64_0x3B_nt!NtAllocateVirtualMemory+bd6

BUCKET_ID:  X64_0x3B_nt!NtAllocateVirtualMemory+bd6
Have you run memtest on each stick individually?

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Yep I've done this already, they all passed.

I'll test the other three RAM slots now however.
My System SpecsSystem Spec
29 Dec 2012   #20

Windows 7 x64
 
 

All slots are working fine. Could it be a driver messing with me?
My System SpecsSystem Spec
Reply

 Numerous BSoDs hitting randomly




Thread Tools



Similar help and support threads for2: Numerous BSoDs hitting randomly
Thread Forum
Solved Numerous BSODs at various times doing various things BSOD Help and Support
Numerous BSODs over last 2/3 days, dont know cause. BSOD Help and Support
BSODs and freezes hitting randomly BSOD Help and Support
Numerous BSODs BSOD Help and Support
Numerous BSODs prohibiting me from even using Computer BSOD Help and Support
Numerous BSODs BSOD Help and Support
Windows 7 numerous BSODs BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:37 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33