Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD browsing the web, two in less than 10 mins..

13 Dec 2012   #1
Luisit0

Windows 7 Home Premium 64 bit
 
 
BSOD browsing the web, two in less than 10 mins..

It has been a week since i had a bsod, i honestly thought my pc was finally working as it should.. It used to get bsod's quite frequently, so i updated all the drivers that needed updating with driverupdater free version and cleaned/optimized the whole pc with tuneup utilities 2013 and it ran great that whole week, but a couple of minutes ago a page_fault_in_nonpaged_area bsod and another same error bsod in less than 10 minutes apart from the first one... i have bluescreenview.exe so i opened it and checked the errors, but i dont understand anything so i took the minidump files and uploaded them here. Hopefully someone can help out here, thanks in advanced!


My System SpecsSystem Spec
.
13 Dec 2012   #2
x BlueRobot

 

Code:
BugCheck 50, {fffff683ef78fb40, 0, fffff80002fa2170, 2}

Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiTrimWorkingSet+c0 )
Code:
Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
memory_corruption doesn't necessary mean that a RAM module is faulty, it can also point to a object which corrupted the RAM at the time of the crash, for instance a corrupted driver or program. Paging files and the CPU caches can also be causes.

Follow these steps -

Test for any corrupted drivers, by running Driver Verifier for least 24 hours, stop the test if a BSOD occurs before this time frame. Driver Verifier will place stress on the drivers within your system, which will cause corrupted drivers to crash and hopefully be pinpointed. More Help and Information with Driver Verifier - Using Driver Verifier to identify issues with Drivers

Memory:Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Upload .NFO file:

Start > Type: msinfo32 > File, Save
My System SpecsSystem Spec
13 Dec 2012   #3
Luisit0

Windows 7 Home Premium 64 bit
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Code:
BugCheck 50, {fffff683ef78fb40, 0, fffff80002fa2170, 2}

Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiTrimWorkingSet+c0 )
Code:
Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
memory_corruption doesn't necessary mean that a RAM module is faulty, it can also point to a object which corrupted the RAM at the time of the crash, for instance a corrupted driver or program. Paging files and the CPU caches can also be causes.

Follow these steps -

Test for any corrupted drivers, by running Driver Verifier for least 24 hours, stop the test if a BSOD occurs before this time frame. Driver Verifier will place stress on the drivers within your system, which will cause corrupted drivers to crash and hopefully be pinpointed. More Help and Information with Driver Verifier - Using Driver Verifier to identify issues with Drivers

Memory:Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Upload .NFO file:

Start > Type: msinfo32 > File, Save
Thank you! I'll try the above steps and reply back once done with results..
My System SpecsSystem Spec
.

Reply

 BSOD browsing the web, two in less than 10 mins..




Thread Tools




Similar help and support threads
Thread Forum
boot up fast, 1 mins, but take 30 mins before can use start do anythin
hello master2 of seven forums, here i have a problem, which is my pc can get very fast on boot to windows, around 60 sec or less, but the main problem is, i must wait around 30 minutes before i can do anything, like browsing, start winamp, etc. because when i clicked, the PC will be frozen. i...
General Discussion
Turn off display after 10 mins; lock desktop after 30 mins?
Is it possible to turn the displays off after 10 minutes of inactivity, but for the display to lock only after 30 minutes of inactivity? The numbers are examples, but probably close to what I'd set. I'm keen to save power, but having a short inactivity period, but I don't want to be entering my...
General Discussion
BSOD after about 20 mins
Sometimes after about 20 minutes of running the pc starts to degrade it's performance. I notice that when opening and closing web browsers the mouse will start to drag really slowly for a few seconds, and sometimes switching between other windows causes it as well. Sometimes it does not happen...
BSOD Help and Support
BSOD every 20 mins or so
Hi everyone, I am a newbie to the forum and hope that someone might be able to help with my problem. I am getting BSOD practically every 10-20 mins. the message is usually mxgmms.sys. I tried swapping graphics cards to no avail. System is:- Win 7 ultimate SP1 32bit Intel i7 950@3.07Ghz 4Gb...
BSOD Help and Support
BSOD every 10 mins
Hi, I recently installed Windows 7 on my HP Pavilion laptop. It BSODs every 10 minutes and most of my programs/virus software etc are not compatible. I just want to get rid of it and go back to Vista. However, I can't reinstall Vista over the top because it crashes before it gets a chance to...
BSOD Help and Support
Had bsod 3x in 20 mins, help
Hi before it quickly shuts shop again here is message somebody plesase help X0000000loadsa 0s1 0X00000000000008 Again 2 Again 0 *stop: 0X00 loadsa 0aa 0XFFFFFFF88002DIE607
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:52.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App