Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Recurring BSODs before/after startup

24 Apr 2013   #31
RJ116

Windows 7 Home Premium 64bit
 
 

Here you go. Is it possible that this is a software issue, or does it sound more like a hardware one? I seem to be able to run indefinitely on safe mode without any problems


My System SpecsSystem Spec
.
24 Apr 2013   #32
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Start up

Keep less stuff at the start-up. Only anti-virus, this helps avoid driver conflicts and improves time to log in to windows.

Troubleshoot Application Conflicts by Performing a Clean Startup
Startup Programs - Change

Overclocking

If you are overclocking any hardware, STOP. Reset any changed values back to default.
Quote:
This is overclocking software and can lead to system instability and BSOD's. Please reset all components to their stock speeds and then remove the software.
Code:
Start Menu\Programs\ASUS	Public:Start Menu\Programs\ASUS	Public
Start Menu\Programs\ASUS\AI Suite II	Public:Start Menu\Programs\ASUS\AI Suite II	Public
Temperature

For monitoring heat of the system, use Speccy or HWMonitor:

Speccy System Information
HWMonitor

SFC scannow

The SFC /scannow command scans all protected system files and replaces incorrect versions with correct Microsoft versions.
SFC /SCANNOW Command - System File Checker
  1. Click on the Start
  2. Scroll to Accessories
  3. Select Command Prompt > Right click and Run as Administrator
  4. Type
    Code:
    SFC /scannow
Disk Check

Run disk check for errors on your Hard Drive(s) Disk Check

Stress Test

Hardware - Stress Test With Prime95: Hardware - Stress Test With Prime95
CPU - Stress Test Using IntelBurnTest: CPU - Stress Test Using IntelBurnTest
Video Card - Stress Test with Furmark: Video Card - Stress Test with Furmark

Monitor temperature of the system during the tests (with speccy or hwmonitor listed earlier)

This is for information purposes only. The drivers in red should be updated. If updating does not help, remove them.

hamachi.sys Thu Feb 19 16:36:41 2009 (499D3639)
LogMeIn Hamachi Virtual network interface driver
http://www.carrona.org/drivers/driver.php?id=hamachi.sys

The below is for information purposes only. Contains relevant information from the blue screen analysis:
Code:
Debug session time: Wed Apr 24 22:07:35.377 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042413-53929-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:40.251
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003592671, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003592671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3365
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Wed Apr 24 21:49:48.630 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042413-50934-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:03.879
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003558671, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003558671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3365
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Wed Apr 24 21:41:10.732 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042413-19016-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:03.981
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003560671, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003560671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3365
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Wed Apr 24 12:59:35.621 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042413-19796-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:02.870
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003592671, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003592671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3365
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Tue Apr 23 02:34:13.532 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042213-14476-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:57.407
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+44cde )
BugCheck BE, {fffff8a000120000, 80000001c5d08121, fffff880029e7150, b}
BugCheck Info: ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)
Bugcheck code 000000bE
Arguments: 
Arg1: fffff8a000120000, Virtual address for the attempted write.
Arg2: 80000001c5d08121, PTE contents.
Arg3: fffff880029e7150, (reserved)
Arg4: 000000000000000b, (reserved)
BUGCHECK_STR:  0xBE
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0xBE_nt!_??_::FNODOBFM::_string_+44cde
MaxSpeed:     3300
CurrentSpeed: 3365
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Tue Apr 23 02:30:47.782 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042213-15958-02.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:55.656
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003546671, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003546671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Tue Apr 23 02:29:09.463 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042213-15958-01.dmp]
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:57.712
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck BE, {fffff8a00011e000, 80000001cb504121, fffff880029ee150, b}
BugCheck Info: ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)
Bugcheck code 000000bE
Arguments: 
Arg1: fffff8a00011e000, Virtual address for the attempted write.
Arg2: 80000001cb504121, PTE contents.
Arg3: fffff880029ee150, (reserved)
Arg4: 000000000000000b, (reserved)
BUGCHECK_STR:  0xBE
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Tue Apr 23 02:27:27.841 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042213-15865-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:53.715
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff8000359c671, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8000359c671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Sun Apr 21 16:41:45.770 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042113-14929-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:02.644
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+44cde )
BugCheck BE, {fffff8a0000a7000, 80000001cc980121, fffff880029b6150, b}
BugCheck Info: ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)
Bugcheck code 000000bE
Arguments: 
Arg1: fffff8a0000a7000, Virtual address for the attempted write.
Arg2: 80000001cc980121, PTE contents.
Arg3: fffff880029b6150, (reserved)
Arg4: 000000000000000b, (reserved)
BUGCHECK_STR:  0xBE
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0xBE_nt!_??_::FNODOBFM::_string_+44cde
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Sun Apr 21 16:35:14.582 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042113-15116-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:34.831
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff8000355c671, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8000355c671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Sun Apr 21 16:31:56.322 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042113-15397-01.dmp]
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:56.571
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck 50, {ffffffffffffffff, 0, fffff800035ac671, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff800035ac671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Thu Apr 18 13:19:42.017 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\041813-21652-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:11.892
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003550671, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003550671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Thu Apr 18 13:17:46.676 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\041813-19234-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:47.925
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003558671, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003558671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Mon Apr 15 13:21:50.971 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\041513-21793-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:18.220
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003593671, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003593671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Mon Apr 15 13:18:09.395 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\041513-18922-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:39.644
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003558671, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003558671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
My System SpecsSystem Spec
24 Apr 2013   #33
RJ116

Windows 7 Home Premium 64bit
 
 

Does this seem to be a driver problem then?
My System SpecsSystem Spec
.

24 Apr 2013   #34
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Most recent BIOS VERSION

NAMEVERSIONOPERATING SYSTEMDOWNLOAD
P8Z77-V PRO BIOS
1908
Windows 7 x64-bit
download

FIXES:
1.Fixed Power On By RTC function failed.
2.Fixed F8 function is abnormal under fastboot
3.Support new CPUs. Please refer to our website at: ASUSTeK Computer Inc. -Support- CPU Support

Note   Note
Read manual on how to upgrade bios
My System SpecsSystem Spec
24 Apr 2013   #35
RJ116

Windows 7 Home Premium 64bit
 
 

I am running a chkdsk /r at the moment so I will run memtest during the day tomorrow and update the bios in the evening.
My System SpecsSystem Spec
24 Apr 2013   #36
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

You mentioned having no BSOD's in safe mode so it does sound like a driver problem.

When did you last reinstall windows?
My System SpecsSystem Spec
24 Apr 2013   #37
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Quote   Quote: Originally Posted by RJ116 View Post
I am running a chkdsk /r at the moment so I will run memtest during the day tomorrow and update the bios in the evening.
RJ116

I believe you forgot the /F

For
chkdsk /F /R
My System SpecsSystem Spec
25 Apr 2013   #38
RJ116

Windows 7 Home Premium 64bit
 
 

I'd say the last time I installed windows was a bit before I got my new RAM, so a couple of months ago. CHKDSK and SCANNOW don't seem to have fixed anything, and memtest picks up no errors after 10 passes. A clean startup still bsod's with the "paged fault in non paged area" code.
I have deleted hamanchi and it's driver but that didn't seem to help.

Also, I have yet to have a bsod in safe mode, if that is of any use...
My System SpecsSystem Spec
25 Apr 2013   #39
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Quote   Quote: Originally Posted by RJ116 View Post
I'd say the last time I installed windows was a bit before I got my new RAM, so a couple of months ago. CHKDSK doesn't seem to have fixed anything, and memtest picks up no errors after 10 passes. A clean startup still bsod's with the "paged fault in non paged area" code.
I have deleted hamanchi and it's driver but that didn't seem to help.

Also, I have yet to have a bsod in safe mode, if that is of any use...
Start afresh.

Follow this tutorial for a perfect reinstall - Clean Reinstall - Factory OEM Windows 7
My System SpecsSystem Spec
25 Apr 2013   #40
RJ116

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by koolkat77 View Post

Start afresh.

Follow this tutorial for a perfect reinstall - Clean Reinstall - Factory OEM Windows 7
I shall. Backing up my user folder now
My System SpecsSystem Spec
Reply

 Recurring BSODs before/after startup




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Recurring BSODs after using openVPN
Hello everyone, I installed openVPN recently to channel my traffic through a virtual private network. I've been using it in conjunction with other p2p software. The problem seems to reoccur heavily when I'm on p2p (Vuze, then utorrent). I uninstalled Vuze shortly after it caused heavy BSODs....
BSOD Help and Support
Custom Build PC, recurring BSODs
I've got this new PC build like 3 weeks ago, at first it seemed it was fine, I maybe got 1 or 2 BSODs in the first 2 weeks, but during the last week I'm getting 1 each day sometimes two, and mostly when I'm only browsing on Chrome but it happened when playing game/watching videos as well. The...
BSOD Help and Support
Recurring BSODs
Been getting BSODs somewhat frequently over the last couple of months, outside of a few weeks where I was using my laptop instead of my PC. Seems to happen most often while gaming/loading a game, though sometimes it just seems random. I updated the drivers for my graphics card but I'm not sure...
BSOD Help and Support
Recurring BSODs often occuring when gaming
Games in question include warframe and planetside 2. I have the absolute most recent graphic card driver (GeForce 327.23). I have no current overclocks running on my machine. except perhaps the graphics cards factory OC. As of making this thread there are no new updates for my windows. EDIT: one...
BSOD Help and Support
Recurring BSODs
Hi all, As it says in the title, I've been having many recurring BSODs. I've attached the dump files as required. The Windows 7 version is x64, the original OS and an OEM version. My laptop is an Asus Ul80jt; system specifications can be found here (the exact same ones since I purchased this...
BSOD Help and Support
Recurring BSoDs
Thanks for taking a look :) A little over a month ago I began getting blue screens infrequently. This was the first time in years I'd blue screened, so I wrote it down - 03/13/10. This ramped up to a couple a day. Instead of asking for help then, I reinstalled windows (7, 64 bit), and lost my...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 06:52.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App