Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD random 0x0000000a, 0x0000003b

25 Dec 2012   #11
fsanyee

Windows 7 Ultimate x64
 
 

I only use MSE and it's database is updated.
Whats the difference when I start those programs in the startup manually or the system automatically?
Tdskiller found nothing and Windows Deffender Offline full scan is still running.

btw, where did you find that few line? I checked the dump with windbg, but I cant find those...


My System SpecsSystem Spec
.
25 Dec 2012   #12
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

If you keep those programs automatically with windows, it will put a pressure on your network from the very beginning of windows start. And, there is a fair chance of a trouble there. For that, there is a special troubleshooting method: Troubleshoot Application Conflicts by Performing a Clean Startup

Actually, all those are unimportant there ... only the AV program is needed, coz it gives protection. So the best practice is to keep startup clear.

All the programs are installed there in your computer, you can use them anytime, whether they auto start or not.

About those lines .... I used some set of commands those generated those lines as fault.
My System SpecsSystem Spec
25 Dec 2012   #13
fsanyee

Windows 7 Ultimate x64
 
 

The offline scan finished. Its look like my system is not infected.
My System SpecsSystem Spec
.

25 Dec 2012   #14
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Very good to know

After freeing up the startup, let us know about your further issues.
My System SpecsSystem Spec
25 Dec 2012   #15
fsanyee

Windows 7 Ultimate x64
 
 

The red x on the network icon what I mentiond before (next to the clock). It cames back when a virtual machine in virtualbox starts using the network.
Is there any way that I can see whats going on the background with network?
My System SpecsSystem Spec
25 Dec 2012   #16
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Yes, you can. It is from VMWare ....
Attachment 247123
There must be some similar settings for VBox. Shift the network between Bridged and NAT .... it may make some changes there.

Or you may post the same screenshot from your computer for us, too.
My System SpecsSystem Spec
25 Dec 2012   #17
fsanyee

Windows 7 Ultimate x64
 
 

Oh I just got another one...
My System SpecsSystem Spec
25 Dec 2012   #18
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by fsanyee View Post
Oh I just got another one...
It's a different one that we are dealing with .... caused by the display driver.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7E, {ffffffffc0000005, fffff88004b558b6, fffff880063e4a88, fffff880063e42e0}

*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+fa8b6 )

Followup: MachineOwner
---------
Update your ATI/AMD display driver.
You can get it from the link in our forum, Latest AMD Catalyst Video Driver for Windows 7, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.


During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.

But, the hint of network failure is also present there, too. You have both VMWare and Virtual Box installed. Any special reason for it? Change the VirtualBox's net settings from "host only" to "NAT" or "Bridged".

Use only one of those visualization program, as they install a few adapters there as extra, shares a lot of network resource. Both of them can do the same thing very well.
My System SpecsSystem Spec
25 Dec 2012   #19
fsanyee

Windows 7 Ultimate x64
 
 

I have the latest amd driver. should i instal the beta?

I need host only settings for virtual machines.
I installed vmware between the last two bsod, because I want to change from virtualbox...

btw I got the last two while I was playing.
My System SpecsSystem Spec
26 Dec 2012   #20
fsanyee

Windows 7 Ultimate x64
 
 

Here comes the next one:
My System SpecsSystem Spec
Reply

 BSOD random 0x0000000a, 0x0000003b




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b
Dear experts, after just too many days of troubleshooting (please disregard the former thread) I decided to flash the BIOS, then re-format my SSD and re-install Windows 7 including all drivers the device manager asked for. Apart from BlueScreenView, SF Diagnostic Tool, 7zip and Dropbox, I...
BSOD Help and Support
Multiple BSOD errors 0x0000010e 0x00000001 0x0000000a 0x0000003b
for the last few weeks I have been receiving a whole bunch of BSOD errors. I have tried absolutely everything I possibly can to resolve this issue. I ran a memtest86 for 8-9 hours with 4 passes and no errors, I have completely removed my HDD's and replaced with a new SSD drive and I have also...
BSOD Help and Support
Random BSOD, 3 crashes, error 0x000000d1, 0x0000000a, and 0x0000003b
I'm new to this whole crash analyzing thing so I'm sorry if a messed something up. I included the .zip in the attachments. Let me know if you need anything else. Thanks for the help!
BSOD Help and Support
BSOD Playing BF3 error 0x0000003B, 0x0000000D1, 0x0000000A & 0x0000007
BSOD Playing BF3 error 0x0000003B, 0x0000000D1, 0x0000000A & 0x0000007F. So far. I dont know what the heck is going on, but it seems to crash mostly when I am playing Battlefireld 3. I ran a diagnostics check and nothing came from it. I also did a stress test on my Video card (Nvidia GeForce...
BSOD Help and Support
BSOD generally at startup, errors: 0x0000000a and 0x0000003b.
Hi guys, I have been experiencing BSOD crashes for a few months now. I wasn't really sure what to do but now that they have become more frequent (normally 1-3 a day) I have come to you guys for help. I'm not completely computer illiterate and I've followed the appropriate error posting...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:08.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App