BSOD while using Firefox, error 0x0000001e

Hello everyone hope you all had an awesome Christmas :)

I reinstalled my Windows 7 x64 about a week or 2 ago becasue it was feeling slow (no problems with it)

The new install has worked fine untill today when i started getting BSODs while using firefox, i think its related to firefox becasue when i have firefox open the computer have blue screend in about 5mins, but now when im wrighting this with IE it hasnt blue screend for 40mins.

I didnt see all the error codes but the last one which was 0x0000001e

Im going to reinstall Firefox and try it with a new profile to see if that helps.

Hope someone has time to help little me in these busy christmas times :)

Do not use CCleaner during the time of troubleshooting. It wipes the .DMP files out.

Code:

CPUID:        "Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz"
MaxSpeed:     3400
CurrentSpeed: 3410

If you are overclocking any hardware, STOP. Reset any changed values back to default.

Is the firmware of your SSD up-to-date?

Upload a screenshot of your hard disk using CrystalDiskInfo:

• CrystalDiskInfo - Software - Crystal Dew World
• Screenshots and Files - Upload and Post in Seven Forums

Make a hard drive test from the hard drive manufacturers website:

• Hard Drive Diagnostic Procedure

Run Disk Check on your hard disk for file system errors and bad sectors on it:

• Disk Check

Hard drive test both short and long with:

• SeaTools for Windows

Also the DOS version of:

• SeaTools for DOS
• SeaTools for DOS tutorial

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

• RAM - Test with Memtest86+

The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.

*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.

If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.

*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.

*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.

3. Test the next stick of RAM (stick #2) in the next motherboard slot.

*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.

*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.

4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.

   Information

Errors are sometimes found after 8 passes.

   Tip

Do this test overnight, before going to bed.

Thanks for letting us know your fix. :)