Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD After Upgrafing RAM from 2 x2gb to 2x 4gb.

30 Dec 2012   #1
Blessed Spartan

Windows 7 Home Prenium 64 bit
 
 
BSOD After Upgrading RAM from 2 x2gb to 2x 4gb.

Hello, i recently purchased 8Gb of Corsair Vengeance RAM ( CMZ8GX3M2A1600C9). upon installing this ram in the correct Dimm slots ( 1 and 3) I have been getting BSOD. this can happen once i load up the computer after it guess past the login screen. However after changing the BIOS from the previous setting to manual for example from auto, it works fine and will do so until the next time i reboot my pc.
Here is an attachment of the crashes.

Hope someone knows how to help me


My System SpecsSystem Spec
.
30 Dec 2012   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Welcome aboard.

Trusteer Rapport is one of the main reasons of failure here.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {ffffffffffffff8b, 0, fffff88001d89137, 0}

*** WARNING: Unable to verify timestamp for RapportCerberus64_43926.sys
*** ERROR: Module load completed but symbols could not be loaded for RapportCerberus64_43926.sys

Could not read faulting driver name
Probably caused by : RapportCerberus64_43926.sys ( RapportCerberus64_43926+17137 )

Followup: MachineOwner
---------
And
Code:
fffff880`0938d630  fffff880`04b6ff78Unable to load image \??\C:\ProgramData\Trusteer\Rapport\store\exts\RapportCerberus\43926\RapportCerberus64_43926.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for RapportCerberus64_43926.sys
*** ERROR: Module load completed but symbols could not be loaded for RapportCerberus64_43926.sys
 RapportCerberus64_43926+0xf78
And, the program is very recently installed. If possible, get rid of it, it is making the system crash prone.

Another thing, Kaspersky.
Code:
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
 klif+0x3801c
As it is failing, uninstall it. Uninstall Kaspersky using Kaspersky Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download and install those, and then run full system scans with both of them, one by one.

Free up the startup. Nothing more is needed there other than the antivirus, MSC in the changed situation.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept the restart.
Let us know the results.
My System SpecsSystem Spec
30 Dec 2012   #3
Blessed Spartan

Windows 7 Home Prenium 64 bit
 
 

Thank you for the response, i was worried id been over looked . Ill try this now and get back to you tommorw. happy new year
My System SpecsSystem Spec
.

30 Dec 2012   #4
Pauly

Win7 Ultimate X64
 
 

Seeing as you had new ram might be worth running an overnight memtest to verify the new stuff just as a precaution
RAM - Test with Memtest86+
My System SpecsSystem Spec
30 Dec 2012   #5
Blessed Spartan

Windows 7 Home Prenium 64 bit
 
 

Did as You said, and the computer no longer allows me to load past the login screen. i was instead introduced to another error, here you go. Ive run mem test and it came up with no errors, i got the ram for christmas so i doubt its the ram itself also. I'm really not sure what to do
My System SpecsSystem Spec
30 Dec 2012   #6
Pauly

Win7 Ultimate X64
 
 

Did as you said?
Do you mean msconfig that archie was talking about if so enter via safe mode and undo any changes although there should be nothing in the startup tab that will make system unbootable
My System SpecsSystem Spec
30 Dec 2012   #7
Blessed Spartan

Windows 7 Home Prenium 64 bit
 
 

i just had to switch back to my old ram to run the system. I got blue screen 3 times, the first just after the BIOS startup option display, and the 2nd/3rd being after i had logged in to windows.I meant both sorry should have specified. Ive run mem test, but i hadn't run it for 7 passes. Ill try again tonight
My System SpecsSystem Spec
30 Dec 2012   #8
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Yes, A RAM error sometimes will show only after 5-6 passes. Follow the tutorial carefully. Don't try to use both new and old RAM together. Make sure the new is supported in your board, that is, the type and frequency.

Verify your BIOS has the correct DRAM settings, it may still be on the old settings.

Attachment 247908
My System SpecsSystem Spec
30 Dec 2012   #9
Blessed Spartan

Windows 7 Home Prenium 64 bit
 
 

how will i be able to verify these settings, everything is set to Auto on my Bios settings, ive lpooked at the timings, they seem to be parralle. Ive used SIW, and CPUZ SIW says the wrong values are detected under the memory section, but does not specify. ill try the test nbow. Thank you for your support
My System SpecsSystem Spec
30 Dec 2012   #10
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

You'll need to switch RAM parameters to manual to see where the BIOS has them. RAM is likely running a 11-11-11-32 at 1333MHz or possibly 1066MHz.
My System SpecsSystem Spec
Reply

 BSOD After Upgrafing RAM from 2 x2gb to 2x 4gb.




Thread Tools Search this Thread
Search this Thread:

Advanced Search



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:54.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App