Your ati driver is causing the BSOD
Code:
Loading User Symbols
Loading unloaded module list
.....
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff80002c010f3, fffff88002fd22b8, fffff88002fd1b20}
Probably caused by : atikmpag.sys ( atikmpag+10aec )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80002c010f3, The address that the exception occurred at
Arg3: fffff88002fd22b8, Exception Record Address
Arg4: fffff88002fd1b20, Context Record Address
Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!ExFreePoolWithTag+43
fffff800`02c010f3 418b45f0 mov eax,dword ptr [r13-10h]
EXCEPTION_RECORD: fffff88002fd22b8 -- (.exr 0xfffff88002fd22b8)
ExceptionAddress: fffff80002c010f3 (nt!ExFreePoolWithTag+0x0000000000000043)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff
CONTEXT: fffff88002fd1b20 -- (.cxr 0xfffff88002fd1b20)
rax=0000000000000000 rbx=fffffa800692d880 rcx=0069007200750063
rdx=000000005958504b rsi=0000000000000000 rdi=fffffa800692d880
rip=fffff80002c010f3 rsp=fffff88002fd24f0 rbp=fffffa8006362b10
r8=0000000000006680 r9=00000000000000c0 r10=fffff80002a5d000
r11=0000000000000290 r12=fffffa80049e6d40 r13=0069007200750063
r14=fffff88004857110 r15=fffffa8004780a20
iopl=0 nv up ei pl nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010206
nt!ExFreePoolWithTag+0x43:
fffff800`02c010f3 418b45f0 mov eax,dword ptr [r13-10h] ds:002b:00690072`00750053=????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000000
EXCEPTION_PARAMETER2: ffffffffffffffff
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002d040e0
GetUlongFromAddress: unable to read from fffff80002d04198
ffffffffffffffff
FOLLOWUP_IP:
atikmpag+10aec
fffff880`043b7aec ?? ???
BUGCHECK_STR: 0x7E
LAST_CONTROL_TRANSFER: from fffff880043b7aec to fffff80002c010f3
STACK_TEXT:
fffff880`02fd24f0 fffff880`043b7aec : fffffa80`049e6d40 fffffa80`06362b10 00000000`00000000 fffffa80`06362b10 : nt!ExFreePoolWithTag+0x43
fffff880`02fd25a0 fffffa80`049e6d40 : fffffa80`06362b10 00000000`00000000 fffffa80`06362b10 fffffa80`0692d880 : atikmpag+0x10aec
fffff880`02fd25a8 fffffa80`06362b10 : 00000000`00000000 fffffa80`06362b10 fffffa80`0692d880 fffff880`043b00f2 : 0xfffffa80`049e6d40
fffff880`02fd25b0 00000000`00000000 : fffffa80`06362b10 fffffa80`0692d880 fffff880`043b00f2 00000000`00000001 : 0xfffffa80`06362b10
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: atikmpag+10aec
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: atikmpag
IMAGE_NAME: atikmpag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4d409c8d
STACK_COMMAND: .cxr 0xfffff88002fd1b20 ; kb
FAILURE_BUCKET_ID: X64_0x7E_atikmpag+10aec
BUCKET_ID: X64_0x7E_atikmpag+10aec
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80002c010f3, The address that the exception occurred at
Arg3: fffff88002fd22b8, Exception Record Address
Arg4: fffff88002fd1b20, Context Record Address
Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!ExFreePoolWithTag+43
fffff800`02c010f3 418b45f0 mov eax,dword ptr [r13-10h]
EXCEPTION_RECORD: fffff88002fd22b8 -- (.exr 0xfffff88002fd22b8)
ExceptionAddress: fffff80002c010f3 (nt!ExFreePoolWithTag+0x0000000000000043)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff
CONTEXT: fffff88002fd1b20 -- (.cxr 0xfffff88002fd1b20)
rax=0000000000000000 rbx=fffffa800692d880 rcx=0069007200750063
rdx=000000005958504b rsi=0000000000000000 rdi=fffffa800692d880
rip=fffff80002c010f3 rsp=fffff88002fd24f0 rbp=fffffa8006362b10
r8=0000000000006680 r9=00000000000000c0 r10=fffff80002a5d000
r11=0000000000000290 r12=fffffa80049e6d40 r13=0069007200750063
r14=fffff88004857110 r15=fffffa8004780a20
iopl=0 nv up ei pl nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010206
nt!ExFreePoolWithTag+0x43:
fffff800`02c010f3 418b45f0 mov eax,dword ptr [r13-10h] ds:002b:00690072`00750053=????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000000
EXCEPTION_PARAMETER2: ffffffffffffffff
READ_ADDRESS: ffffffffffffffff
FOLLOWUP_IP:
atikmpag+10aec
fffff880`043b7aec ?? ???
BUGCHECK_STR: 0x7E
LAST_CONTROL_TRANSFER: from fffff880043b7aec to fffff80002c010f3
STACK_TEXT:
fffff880`02fd24f0 fffff880`043b7aec : fffffa80`049e6d40 fffffa80`06362b10 00000000`00000000 fffffa80`06362b10 : nt!ExFreePoolWithTag+0x43
fffff880`02fd25a0 fffffa80`049e6d40 : fffffa80`06362b10 00000000`00000000 fffffa80`06362b10 fffffa80`0692d880 : atikmpag+0x10aec
fffff880`02fd25a8 fffffa80`06362b10 : 00000000`00000000 fffffa80`06362b10 fffffa80`0692d880 fffff880`043b00f2 : 0xfffffa80`049e6d40
fffff880`02fd25b0 00000000`00000000 : fffffa80`06362b10 fffffa80`0692d880 fffff880`043b00f2 00000000`00000001 : 0xfffffa80`06362b10
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: atikmpag+10aec
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: atikmpag
IMAGE_NAME: atikmpag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4d409c8d
STACK_COMMAND: .cxr 0xfffff88002fd1b20 ; kb
FAILURE_BUCKET_ID: X64_0x7E_atikmpag+10aec
BUCKET_ID: X64_0x7E_atikmpag+10aec
Followup: MachineOwner
---------
Driver Reference Table
Update this ATI Video driver (remove the Catalyst Control Center and only install the Display Driver)
http://support.amd.com/us/Pages/AMDSupportHub.aspx