Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Blue Screen (BSOD) After System Image Restore - *** STOP 0x000000F4...

08 Jan 2013   #21
miketh2005

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by centaur78 View Post
try running this command and let me know the output

reg query \\\HKLM\SYSTEM\CurrentControlSet\Control\CrashControl

then try using this for ex.

wmic recoveros set MiniDumpDirectory = D:\Minidump ( or whichever drive you have)

then try

wmic recoveros set DebugInfoType = 3
I did reg query \\\HKLM\SYSTEM\CurrentControlSet\Control\CrashControl exactly and it says:

ERROR: Invalid key name.
Type "REG QUERY /?" for usage.

I then proceeded to do your other commands. They both said successful, but it never dumped to file and the DebugInfoType got reset back to 0.


My System SpecsSystem Spec
.
08 Jan 2013   #22
centaur78

Windows 7 ultimate x64
 
 

oh crap....

sorry try this...

REG QUERY HKLM\SYSTEM\CurrentControlSet\Control\CrashControl
My System SpecsSystem Spec
08 Jan 2013   #23
miketh2005

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by centaur78 View Post
oh crap....

sorry try this...

REG QUERY HKLM\SYSTEM\CurrentControlSet\Control\CrashControl
It says:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl
AutoReboot REG_DWORD 0x0
CrashDumpEnabled REG_DWORD 0x0
Overwrite REG_DWORD 0x1
DumpFilters REG_MULTI_SZ dumpfve.sys

Thank you.
My System SpecsSystem Spec
.

08 Jan 2013   #24
centaur78

Windows 7 ultimate x64
 
 

Okie good

Follow the next steps one after another... Each time you type Yes when asked to overwrite......

First set the crash dump to minidump... thats why its 0x3

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v CrashDumpEnabled /t REG_DWORD /d 0x3

Next set the log event

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v LogEvent /t REG_DWORD /d 0x1

Then the Minidump counts

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v MinidumpsCount /t REG_DWORD /d 0x32

Then the Dump file

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v DumpFile /t REG_EXPAND_SZ /d ^%SystemRoot%\MEMORY.DMP

Then the Minidump location

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v MinidumpDir /t REG_EXPAND_SZ /d ^%SystemRoot%\Minidump

Once finished... do the reg query to see of everything is enabled.

REG QUERY HKLM\SYSTEM\CurrentControlSet\Control\CrashControl

The resulting query should look like this.

Quote:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl
AutoReboot REG_DWORD 0x1
CrashDumpEnabled REG_DWORD 0x3
Overwrite REG_DWORD 0x1
LogEvent REG_DWORD 0x1
MinidumpsCount REG_DWORD 0x32
DumpFile REG_EXPAND_SZ %SystemRoot%\MEMORY.DMP
MinidumpDir REG_EXPAND_SZ %SystemRoot%\Minidump
DumpFilters REG_MULTI_SZ dumpfve.sys
My System SpecsSystem Spec
08 Jan 2013   #25
miketh2005

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by centaur78 View Post
Okie good

Follow the next steps one after another... Each time you type Yes when asked to overwrite......

First set the crash dump to minidump... thats why its 0x3

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v CrashDumpEnabled /t REG_DWORD /d 0x3

Next set the log event

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v LogEvent /t REG_DWORD /d 0x1

Then the Minidump counts

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v MinidumpsCount /t REG_DWORD /d 0x32

Then the Dump file

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v DumpFile /t REG_EXPAND_SZ /d ^%SystemRoot%\MEMORY.DMP

Then the Minidump location

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v MinidumpDir /t REG_EXPAND_SZ /d ^%SystemRoot%\Minidump

Once finished... do the reg query to see of everything is enabled.

REG QUERY HKLM\SYSTEM\CurrentControlSet\Control\CrashControl

The resulting query should look like this.

Quote:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl
AutoReboot REG_DWORD 0x1
CrashDumpEnabled REG_DWORD 0x3
Overwrite REG_DWORD 0x1
LogEvent REG_DWORD 0x1
MinidumpsCount REG_DWORD 0x32
DumpFile REG_EXPAND_SZ %SystemRoot%\MEMORY.DMP
MinidumpDir REG_EXPAND_SZ %SystemRoot%\Minidump
DumpFilters REG_MULTI_SZ dumpfve.sys
I just released you could use the right directional key to copy from the previous command by chance when doing these command. Never knew that before and saved me some time.

Results:
Quote:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl
AutoReboot REG_DWORD 0x0
CrashDumpEnabled REG_DWORD 0x3
Overwrite REG_DWORD 0x1
DumpFilters REG_MULTI_SZ dumpfve.sys
LogEvent REG_DWORD 0x1
MinidumpsCount REG_DWORD 0x32
DumpFile REG_EXPAND_SZ X:\%SystemRoot%\MEMORY.DMP
MinidumpDir REG_EXPAND_SZ X:\%SystemRoot%\Minidump
I don't think the autoreboot is significant, but what about the drive saying X:\ instead of my drive which is C:\?
My System SpecsSystem Spec
08 Jan 2013   #26
centaur78

Windows 7 ultimate x64
 
 

Aha

Thats the problem... it should never be X or C.... as %SystemRoot% tells windows whatever is drive where windows in installed.

ok repeat only the last two steps again ...

Then the Dump file

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v DumpFile /t REG_EXPAND_SZ /d ^%SystemRoot%\MEMORY.DMP

Then the Minidump location

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v MinidumpDir /t REG_EXPAND_SZ /d ^%SystemRoot%\Minidump

Remember there is a carat ^ .. after the /d.. its important to add this


One question... how are you doing this command i mean is it from the DVD or is it from the command line through F8... sorry i should have asked this before ???
My System SpecsSystem Spec
09 Jan 2013   #27
miketh2005

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by centaur78 View Post
Aha

Thats the problem... it should never be X or C.... as %SystemRoot% tells windows whatever is drive where windows in installed.

ok repeat only the last two steps again ...

Then the Dump file

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v DumpFile /t REG_EXPAND_SZ /d ^%SystemRoot%\MEMORY.DMP

Then the Minidump location

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v MinidumpDir /t REG_EXPAND_SZ /d ^%SystemRoot%\Minidump

Remember there is a carat ^ .. after the /d.. its important to add this


One question... how are you doing this command i mean is it from the DVD or is it from the command line through F8... sorry i should have asked this before ???
I was doing it through F8 but I do have the disc in also. I did have the carat after /d. Do I still repeat the last steps?
My System SpecsSystem Spec
09 Jan 2013   #28
centaur78

Windows 7 ultimate x64
 
 

F8 is fine..

Yes please repeat and then do a REG QUERY again
My System SpecsSystem Spec
09 Jan 2013   #29
miketh2005

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by centaur78 View Post
F8 is fine..

Yes please repeat and then do a REG QUERY again
I copied the output wrong, it actually says:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl
AutoReboot REG_DWORD 0x0
CrashDumpEnabled REG_DWORD 0x3
Overwrite REG_DWORD 0x1
DumpFilters REG_MULTI_SZ dumpfve.sys
LogEvent REG_DWORD 0x1
MinidumpsCount REG_DWORD 0x32
DumpFile REG_EXPAND_SZ X:\windows\MEMORY.DMP
MinidumpDir REG_EXPAND_SZ X:\windows\Minidump
My System SpecsSystem Spec
09 Jan 2013   #30
centaur78

Windows 7 ultimate x64
 
 

This is weird... The command should set it to %SystemRoot%..... not sure why it still refers to X ??

Could you repeat the last steps again .... but this time... try to make it specific..

Like

For Dump file

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v DumpFile /t REG_EXPAND_SZ /d ^C:\Windows\MEMORY.DMP

Then the Minidump location

REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl /v MinidumpDir /t REG_EXPAND_SZ /d ^C:\Windows\Minidump


Let me know what the REG QUERY shows after doing this
My System SpecsSystem Spec
Reply

 Blue Screen (BSOD) After System Image Restore - *** STOP 0x000000F4...




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Did a system image restore now get bsod
Bought a bare bones kit, Asus motherboard amd 8-core cpu 1TB wd hardrive, 8GB memory, It all went together fine, I installed w-7 64-bit os system that went fine, Then I partitioned the drive, 500GB & 431GB the windows-7 64-bit on the 500GB, formatted the 431gb partition and installed w-7 32-bit...
BSOD Help and Support
Blue Screen after attempting SID Change, unable to use system restore
BSOD info: *** STOP: 0X000000F4 (0X000000000000003, 0XFFFFFA800ADB2B30, 0XFFFFFA800ADB2E10, 0XFFFFF8000318e7b0 When trying to use system restore, I get "you must enable system protection on this drive" however, when I try to do this from command prompt using a windows 7 cd...
BSOD Help and Support
Multiple crashing - "STOP: 0x000000F4", blue screen with white script.
Hi, Have read the instructions at: Blue Screen of Death (BSOD) Posting Instructions tried to download the SF_Diagnostic_Tool, but it seemed to hang. There are several enquiry posts on that thread which have not been addressed I also noticed. I do not know which other 'configure dump file...
BSOD Help and Support
BSOD persists after System Restore, error 0x000000F4
My laptop seems to have taken a shining to the colour blue today. I had some KERNEL_DATA_INPAGE_ERRORs this morning, which popped up after some install/uninstall issues. Followed this up with a System Restore. Those BSODs were replaced by a video driver failure BSOD which was repaired by installing...
BSOD Help and Support
Blue Screen Stop: 0x000000F4 (0x00000003, 0x85FE8470, 0x085FE85DC, 0x8
New installation of Windows 7 Home Basic but there is a crash with this error : Stop: 0x000000F4 (0x00000003, 0x85FE8470, 0x085FE85DC, 0x82C6AD50). Any solution of this. http://imageshack.us/photo/my-images/191/photo1xkb.jpg/
BSOD Help and Support
Blue screen 0x000000F4 error
Hello. I am getting this error in mu Clevo P170HM. It happened suddenly. I can work on my safe mode, in normal mode after 1minute I got blue screen and that error. I got eset antivirus. Info: -win 7 x64 HP -the original installed OS -full retail version -What is the age of system: 1 month...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:59.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App