Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Kmode_exception_not_handled

11 Jan 2013   #21
rippe

Windows 7 home premium 64bit
 
 

update: I reinstalled nvidia drivers once again but this time with "clean install". I noticed that the bluescreen involved nvidia drivers so this could help?

Just waiting for another bluescreen to surprise me...


My System SpecsSystem Spec
.
12 Jan 2013   #22
rippe

Windows 7 home premium 64bit
 
 

GPU drivers did not do help. I got this bluescreen now. Could the root problem be the MoBo?
My System SpecsSystem Spec
12 Jan 2013   #23
x BlueRobot

 

Code:
BugCheck 7F, {8, 80050031, 6f8, fffff88004a8d752}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1d6752 )
Code:
Usual causes:  Memory corruption, Hardware (memory in particular), Overclocking failure, Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack
Update:

Code:
3: kd> lmvm nvlddmkm
start             end                 module name
fffff880`048b7000 fffff880`05355000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Sat Dec 29 06:47:52 2012 (50DE9218)
    CheckSum:         00A7F96C
    ImageSize:        00A9E000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
The latest driver which has been released, is dated as the 5th January 2013:
  1. Download Driver
  2. Start Type: Device Manager
  3. Expand Display Adapters
  4. Right-Click Driver Name, Uninstall
  5. Reboot
  6. Run Driver Sweeper
  7. Reboot
  8. Install Downloaded Driver
Driver Sweeper will scan for any left over files from the old driver, old driver files can cause conflicts with new driver installations. Create a System Restore point beforehand, in case any problems or issues arise.

Driver Sweeper:Scan for any missing, modified or corrupted protected Windows files with:Could you please upload the OCCT graphs and did the BSOD occur with new RAM modules?
My System SpecsSystem Spec
.

12 Jan 2013   #24
rippe

Windows 7 home premium 64bit
 
 

Scan with SFC /scannow command has been done and it said that no violations found.

I uninstalled NVIDIA drivers, rebooted, ran driver sweeper, rebooted, installed 310.90 NVIDIA drivers and rebooted. Now i ran OCCT GPU test for 10minutes and zipped graphs into attachement, the FPS drops at the begining was because i move the graphics window a few times.

I installed the new RAM back to my motherboard because it seems that it doesnt matter which ram i use. Anyways I'm preparing for next bluescreen again, although no indicators for that happening is present...
My System SpecsSystem Spec
13 Jan 2013   #25
x BlueRobot

 

You need to run OCCT for least 1 hour, in order to gather a reliable judgment about the voltages and temperatures, to deal with any overheating issues you can remove any dust from inside the case and remove the side cover to provide better air circulation. Please ensure you have enabled the Error Checking ability in OCCT.

Any possible BIOS updates? It will best to check the motherboards website or your computer manufacturer:

Code:
[BIOS Information (Type 0) - Length 24 - Handle 0000h]
  Vendor                        American Megatrends Inc.
  BIOS Version                  2105   
  BIOS Starting Address Segment f000
  BIOS Release Date             07/23/2010
My System SpecsSystem Spec
13 Jan 2013   #26
rippe

Windows 7 home premium 64bit
 
 

As i said earlier, that is the latest bios update. I've dusted my pc already. But good news, my computer has been stable for entire day as of now. By the way if i enable error checking in OCCT, the graphics window just freezes and does nothing.
My System SpecsSystem Spec
14 Jan 2013   #27
rippe

Windows 7 home premium 64bit
 
 

2 days stable now I trust the blue screen issue is fixed now.

Thank you blue robot you are awesome. I believe that the number of different bluescreens were because of mixed GPU drivers. Although the problems begun when i installed the new memory sticks but maybe i also updated nvidia drivers that same day which caused the problems, i don't remember. Anyways it was most likely a driver issue and i hope the system won't crash tomorrow

Thanks for help!
My System SpecsSystem Spec
14 Jan 2013   #28
x BlueRobot

 

Your welcome, and hopefully no more crashes will occur
My System SpecsSystem Spec
16 Jan 2013   #29
rippe

Windows 7 home premium 64bit
 
 

bad news, i got blue screen after 4 stable days. I wonder if this is related crash. Linking the crash dump

edit: I'm running DriverEasy software and updating every driver i can get my hands on
My System SpecsSystem Spec
16 Jan 2013   #30
x BlueRobot

 

The dump file seems to be corrupted for some reason, try recreating your page file if you haven't done so, by following these steps:

Quote:
Delete/Recreate the Pagefile
  1. Go to Start and type in "sysdm.cpl" (without the quotes) and press Enter
  2. Click on the Advanced tab
  3. Click on the Performance Settings button
  4. Click on the Advanced tab
  5. Click on the Virtual Memory Change button
  6. Uncheck the "Automatically manage paging file size for all drives" box (it's the default)
  7. If the above box isn't checked, then make a note of what the paging file settings are
  8. Click on the "No paging file" radio button, then click on "Set"
  9. Answer Yes to the confirmation dialog that pops up.
  10. Click on OK 3 times (to close all the Windows)
  11. Reboot the system (this will delete the paging file)
  12. Once Windows starts, go to Start and type in "sysdm.cpl" (without the quotes) and press Enter
  13. Click on the Advanced tab
  14. Click on the Performance Settings button
  15. Click on the Advanced tab
  16. Click on the Virtual Memory Change button
  17. Place a checkmark in the "Automatically manage paging file size for all drives" box (it's the default)
  18. If the above box wasn't checked at first, then re-enter the paging file settings that you noted in Step 7
  19. Click on "Set" (it'll be greyed out if you checked the box 2 steps earlier
  20. Click on OK 3 times (to close all the Windows)
  21. Reboot the system (this will recreate the paging file
)
Have you ran Memtest86+ for least 9-10 passes yet?

I also wouldn't recommend using DriverEasy for updating drivers, since many third-party driver programs aren't very reliable at updating drivers; it's best to download the driver file from the manufacturer and then install through Windows Device Manager instead.

Code:
**************************************************************************
THIS DUMP FILE IS PARTIALLY CORRUPT.
KdDebuggerDataBlock is not present or unreadable.
**************************************************************************
My System SpecsSystem Spec
Reply

 Kmode_exception_not_handled




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Kmode_exception_not_handled
How do I solv this problem windows version: Windows 7 , 6.1, build: 7600 windows dir: C:\Windows Hardware: INTEL_, Intel Corporation, DQ965GF CPU: GenuineIntel Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz Intel586, level: 6 2 logical processors, active mask: 3 RAM: 4225486848 total VM:...
BSOD Help and Support
KMODE_EXCEPTION_NOT_HANDLED bsod
So i was playing bf4 a few minutes ago and this bsod error popped up. this is the first time seeing this bsod while playing bf4 and ive had the game since launch. i took a screenshot of bluescreen viewer right here http://i.imgur.com/6TAZ2d2.png . if any more info is needed let me know. here...
BSOD Help and Support
Bsod kmode_exception_not_handled
Hi everyone, Got a friend who has been having some issues with her computer. SHe has been getting BSOD's very randomly while she is using her computer. While i have not seen the blue screen yet, she has quite a few dump files to prove her issue. I've included the dump file along with other...
BSOD Help and Support
Bsod kmode_exception_not_handled
A few weeks ago, I started getting the BSOD. It happened not long after a windows update. I did a rollback to before the update which didn't help and I did Dell's Backup and Recovery which also didn't work. Every time I have to restart the computer, it does 2-3 BSOD on restarts and then recovers...
BSOD Help and Support
Bsod kmode_exception_not_handled
I'm New i'll try to post my problem : from bluescreenview program : KMODE_EXCEPTION_NOT_HANDLED bug check code 0x0000001e parameter 1 ffffffff`c0000005 parameter 2 fffff800`02a82d97 parameter 3 00000000`00000000
BSOD Help and Support
KMODE_EXCEPTION_NOT_HANDLED (1e)
Hello everyone, I am getting this BSOD on a new install/build and need help solving. Everything installs fine and the PC will run for perfectly for a couple of days then I get this BSOD KMODE_EXCEPTION_NOT_HANDLED (1e). Sometimes the system will boot right back up and work for a few...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:43.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App