bsod PAGE_FAULT_IN_NONPAGED_AREA


  1. Posts : 3
    windows 7 64bit ultimate
       #1

    bsod PAGE_FAULT_IN_NONPAGED_AREA


    inter core i7 2600
    asus p8z77-m
    ddr3 8gb
    nvidia geforce gt 630
    550w corsair


    bsod PAGE_FAULT_IN_NONPAGED_AREA

    i hv tried many solutions

    but i jsut dunnoe wat to do .. pls help me asap
    abt 6 0 7 times per day..
    n i did this pc ; in sept 2012....
      My Computer


  2. Posts : 8,383
    Windows 10 Pro x64, Arch Linux
       #2

    Welcome to SevenForums :)

    BCCode 124 is mainly caused by defective hardware especially the processor.

    I noticed that your processor is slighly overclocked to 3502MHz, please stop any overclocking. Remove Avast for diagnostic purposes then run Prime 95 to test your CPU. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs).
    Note that this test may overheat the CPU, ensure proper cooling.

    Furthermore your dump files points out an issue with your Processor. This occurs when the processor is non-responsive or is deadlocked.

    Possible causes:

    a) BIOS bug
    b) A driver whose activity is causing the target processor to lock up
    c) A hardware defect


    Details about this bugcheck:
    https://www.sevenforums.com/crash-loc...tml#post567135

    Win 7 A Clock Interrupt... BSOD (101 Error)

    Test your RAM, RAM - Test with Memtest86+
    Post back with your results.
    Code:
    WHEA_UNCORRECTABLE_ERROR (124)
    A fatal hardware error has occurred. Parameter 1 identifies the type of error
    source that reported the error. Parameter 2 holds the address of the
    WHEA_ERROR_RECORD structure that describes the error conditon.
    Arguments:
    Arg1: 0000000000000000, Machine Check Exception
    Arg2: fffffa8008dbb028, Address of the WHEA_ERROR_RECORD structure.
    Arg3: 00000000be000000, High order 32-bits of the MCi_STATUS value.
    Arg4: 0000000000800400, Low order 32-bits of the MCi_STATUS value.
    Code:
    CLOCK_WATCHDOG_TIMEOUT (101)
    An expected clock interrupt was not received on a secondary processor in an
    MP system within the allocated interval. This indicates that the specified
    processor is hung and not processing interrupts.
    Arguments:
    Arg1: 0000000000000019, Clock interrupt time out interval in nominal clock ticks.
    Arg2: 0000000000000000, 0.
    Arg3: fffff880009ed180, The PRCB address of the hung processor.
    Arg4: 0000000000000001, 0.
      My Computer


  3. Posts : 3
    windows 7 64bit ultimate
    Thread Starter
       #3

    10x...wats d outcome from this stress test?
      My Computer


  4. Posts : 3
    windows 7 64bit ultimate
    Thread Starter
       #4

    n no problem all perfect???? nw ??
      My Computer


  5. Posts : 8,383
    Windows 10 Pro x64, Arch Linux
       #5

    subash88 said:
    10x...wats d outcome from this stress test?
    Those are stress test that will give us a clue if anything is wrong or not, from there we can determinate further actions.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:09.
Find Us