New
#21
To answer Pauly, i've uninstalled Daemon Tools, reinstalled DirectX, did memtest, 7 passes and the only stress test was with OCCT.
To answer Pauly, i've uninstalled Daemon Tools, reinstalled DirectX, did memtest, 7 passes and the only stress test was with OCCT.
Have you used the command?
Run some hard-drive diagnostics and follow these steps:Code:sfc /scannow
Find your hard-drive manufacturer and run their tests.
Additional Tests:
Post a screenshot of Crystal Disk Info summary:
Make sure you have the latest firmware for SSD, and ensure all the SATA and Power cables are connected to the drive.
Check for any file system errors and bad sectors using Option #2 of:
Use this command with Disk Check:
Code:chkdsk C: /f /r
Here are SS of CrystalDiskInfo, i've also ran Disk Check on both drives with no errors. The only thing i haven't done is Hard Drive Diagnostic Procedure since my knowledge about computers isn't the best and it seems to advanced to for me
It's easy, download the program from WD, read the short tutorial.
Run the WD Lifeguard test on your HDD(s). Quick Test first, if it passes then run the Extended Test.
Data Lifeguard Diagnostic for Windows
How to test a drive for problems using Windows Data Lifeguard Diagnostics.*
whenever i try to complete the quick test i get an error.
Status code = 00 (No error or no test ever run),
Failure Checkpoint = 00(Unknown Test) SMART self-test did not complete drive 1!
It only affects the C disk
Last edited by Duranox; 11 Feb 2013 at 09:24.
I assume i shouldn't run an extended test on C since it seems to be some sort of error when i try to run a quick test on it.
For now, try using this command:
Start > Type: cmd > Right-Click > Run As Administrator > Enter Command > Press EnterCode:sfc /scannow
tried that no errors or problems
Have you completed the Seagate Tools for Windows?