Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: WHEA_UNCORRECTABLE_ERROR Shift 2, same place.

11 Jan 2013   #1
ratchetclan4

Windows 7 ultimate x64
 
 
WHEA_UNCORRECTABLE_ERROR Shift 2, same place.

I keep getting this bluescreen of death during Shift 2, at the exact same corner on the map it happened, normally when my car was going really fast and i slammed the breaks on but it goes onto the dirt.
i have also had a bluescreen when playing metro 2033, when a massive explosion went off and wood flew everywhere. This has started ever since i took my ati 5770 out and upgraded to a Ati 7950.

if you need any additional information i will include it


My System SpecsSystem Spec
.

11 Jan 2013   #2
Northernsoul55

Microsoft Community Contributor Award Recipient

Windows 7 Professional 64bit
 
 

Hi ratchetclan4,

Please follow the forums posting guide so we can help you futher,

Blue Screen of Death (BSOD) Posting Instructions

cheers

Dave
My System SpecsSystem Spec
11 Jan 2013   #3
ratchetclan4

Windows 7 ultimate x64
 
 

Here you go
My System SpecsSystem Spec
.


11 Jan 2013   #4
Northernsoul55

Microsoft Community Contributor Award Recipient

Windows 7 Professional 64bit
 
 

Hi,

Thanks...Your dump files indicate hardware and driver related issues:

Quote:
BugCheck 124
Probably caused by : hardware
BugCheck 124
Probably caused by : hardware
BugCheck A0000001
Probably caused by : atikmdag.sys
Firstly please update your driver for your Graphics card found here (top one 184mb):

AMD Catalyst

Install and reboot, post back if another BSOD occurs with a new mini dump file

cheers

Dave
My System SpecsSystem Spec
11 Jan 2013   #5
Northernsoul55

Microsoft Community Contributor Award Recipient

Windows 7 Professional 64bit
 
 

Secondly, please download and run:

Download SpeedFan 4.47 - FileHippo.com

and post a screenshot of the temps back

Cheers

Dave
My System SpecsSystem Spec
11 Jan 2013   #6
Dsprague

Microsoft Community Contributor Award Recipient

Windows 7 enterprise 64 bit, Windows 7 Pro 64 bit ,Windows 8 64bit
 
 

Too I note you are running Daemon Tools this is known to cause BSODs, you may want to uninstall it, if you do uninstall it visit this site and download the uninstall tool and run it. if the uninstall button is greyed out you are all good, if it is not click the uninstall button and allow the tool to do its job. If you need a tool to mount .ISO files try Magic Disc. Second I note that you don't have service pack 1 installed you may want to consider installing it.
My System SpecsSystem Spec
13 Jan 2013   #7
Northernsoul55

Microsoft Community Contributor Award Recipient

Windows 7 Professional 64bit
 
 

Hi,

As Dsprague suggested, uninstall Daemon Tools.
Please could you also update to SP1, Service Pack 1 has provided many security and stability updates for Windows 7, which would be highly beneficial for your system.

Learn how to install Windows 7 Service Pack 1 (SP1)

Cheers

Dave
My System SpecsSystem Spec
14 Jan 2013   #8
ratchetclan4

Windows 7 ultimate x64
 
 

I experienced the crash again after installing physx, i shall definitely uninstall daemon tools. Its funny you should point it out cause I've just recently installed it! and was using poweriso before.

I shall report back if this fixes the bsod.
My System SpecsSystem Spec
14 Jan 2013   #9
Northernsoul55

Microsoft Community Contributor Award Recipient

Windows 7 Professional 64bit
 
 

Quote   Quote: Originally Posted by ratchetclan4 View Post
I experienced the crash again after installing physx, i shall definitely uninstall daemon tools. Its funny you should point it out cause I've just recently installed it! and was using poweriso before.

I shall report back if this fixes the bsod.

Also you need to update to Windows 7 SP1 if you havent already done so?

And please read this post on my instruction to remove the ATI Catalyst Control Centre... I have a sneaky suspicion this could be your problem also:

Frequent BSOD

cheers

Dave
My System SpecsSystem Spec
Reply

 WHEA_UNCORRECTABLE_ERROR Shift 2, same place.




Thread Tools





Similar help and support threads
Thread Forum
Shift-E, Shift-L not working sticky keys off
My old keyboard was refusing to re-initialize after the peripheral reset during win 7 boot. It's about a decade old, so I just assumed it was dead. I replaced it with my wireless keyboard I use for working on computers, Ms laser 8000. My keyboard now initializes fine, but shift L and Shift E are...
Drivers
Whea_uncorrectable_error
Hello, I have been recently getting these freezes and then a restart during random moments, booting up to a system error every time. This was happening before I formatted my computer and it is still happening to me now after I reinstalled Windows 7. I have not overclocked any of my hardware and my...
BSOD Help and Support
Whea_uncorrectable_error help please
how do i correct this error i attached the dump file as a txt document and zip file. ANY help is appreciated thanks a lot in advance. i get the bsod randomly also it can happen within 15 mins of usage to 1 day of usage.
BSOD Help and Support
Whea_uncorrectable_error
I am having random BSODs. WhoCrash is reporting back this: This was probably caused by the following module: hal.dll (hal+0x12A3B) Bugcheck code: 0x124 (0x0, 0xFFFFFA8005453028, 0xB66E4000, 0x9B000175) Error: WHEA_UNCORRECTABLE_ERROR file path: C:\windows\system32\hal.dll product:...
BSOD Help and Support
WHEA_UNCORRECTABLE_ERROR (124)
WHEA_UNCORRECTABLE_ERROR (124) A fatal hardware error has occurred. Parameter 1 identifies the type of error source that reported the error. Parameter 2 holds the address of the WHEA_ERROR_RECORD structure that describes the error conditon. Arguments: Arg1: 0000000000000000, Machine Check...
BSOD Help and Support
WHEA_UNCORRECTABLE_ERROR
Ok guys I need help My system shows operating system not found when I try to boot When I put it on, I hear a beeping noise from the left side by the fan ( the cd drive is on the right) When I tried installing windows 8 it shows WHEA_UNCORRECTABLE_ERROR Can you help me out please?
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:43.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App