Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random frequent BSOD 0x124 / 0x00000124 ntoskrnl.exe?

25 Jan 2013   #11
jingad

Windiws 7 Ultimate 32-bit
 
 

Quote   Quote: Originally Posted by Circle View Post
Because the voltages aren't controlled by the processor this could also be either your motherboard or PSU.
Quote   Quote: Originally Posted by x BlueRobot View Post
... which means the CPU has detected a hardware problem and the address points to a processor error because the CPU has found one, so it could be a different form of hardware which is causing the issue. Thanks to Archie for pointing this out to me.If all the hardware checks and swaps seem to be fine, then it could be due to a bad motherboard.
Is there any way to confidently determine exactly which one is problematic? Funds are a bit tight


My System SpecsSystem Spec
.
25 Jan 2013   #12
jingad

Windiws 7 Ultimate 32-bit
 
 

I installed windows xp as a last resort and the reboots have continued though the bc code has changed. Attached a new set of minidumps.
My System SpecsSystem Spec
25 Jan 2013   #13
x BlueRobot

 

Memory:Run Memtest86+ for least 9-10 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Run some hard-drive diagnostics and follow these steps:Find your hard-drive manufacturer and run their tests.

Additional Tests:Post a screenshot of Crystal Disk Info summary: Make sure you have the latest firmware for SSD, and ensure all the SATA and Power cables are connected to the drive.

Check for any file system errors and bad sectors using Option #2 of:Use this command with Disk Check:

Code:
chkdsk C: /f /r
My System SpecsSystem Spec
.

Reply

 Random frequent BSOD 0x124 / 0x00000124 ntoskrnl.exe?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c
Hi, This problem started in Flight Simulator, but now its random. I have run memtest twice for four hours each, all is fine. I have a Western Digital HD, and ran their diagnostic tool for it from their site. I have reset the RAM after cleaning it also. I dust out the machine regularly. I...
BSOD Help and Support
Frequent and seemingly random BSOD - ntoskrnl.exe
Getting random and regular BSODs. BlueScreen View suggests ntoskrnl.exe I've attached the SF Diagnostic tool logs. If you need anything else, please let me know. Thanks. Specs: CPU: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz Mobo: Dell Inc. 054KM3
BSOD Help and Support
Frequent random BSOD with error 0x00000124 using Abobe products
My computer used to show the BSOD occasionally when using Adobe Bridge or Photoshop. In the last couple of weeks it is happening so frequently as to make those programs unusable. It can also happen seemingly at random with other programs, although less computer intensive programs run fine. I get...
BSOD Help and Support
Random idle BSOD 0x124 @ ntoskrnl.exe. ~Once / day
The dreaded 124 error again... Crashing in either the NTOSKrnl.exe or Hal.exe Completely new system with the following hardware: Motherboard: Asrock B75 Pro-M CPU: Intel i5 3570K Mem: Kingston ValueRAM 1x 4GB 1333MHz Disk: Samsung 120GB 840 SSD GPU: Internal Intel HD Graphics 4000 OS:...
BSOD Help and Support
Random BSOD Error - 0x00000124 - becoming more and more frequent
Hi guys, I built my first computer about 2 weeks ago. These are the specs. CPU: AMED Athlon II 651k Black Edition Motherboard: Gigabyte GA-A55M-DS2 A55 AMD FM1 SSD: Corsair 60GB Nova 2 RAM: 8GB 2x4GB Kingston 1600mhz hyper-X CL9 GPU: XFX HD 5450 heatsink 1GB DDR3 low profile
BSOD Help and Support
BSOD random error 0x00000124, hal.dll at address ntoskrnl.exe+7cc40
I keep getting a random BSOD, I get it a lot in Lightroom 3 but have gotten the same error doing nothing. *** STOP: 0x00000124 (0x0000000000000000, 0xfffffa80053d5028, 0x00000000b2000040, 0x0000000000000800) *** hal.dll - Address 0xfffff80002c15a3b base at 0xfffff80002c03000 DateStamp ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App