BSODs I have avoided dealing with, until now.


  1. Posts : 2
    Windows 7 Home Premium 64bit
       #1

    Hey, I have had alot of BSOD over the past few months. I think I had my first one while using demon tools and yasu cloaking... in this time I had no firewall for about 2 days. I got a virus via spotify but bitdefender dealt with that. I have had BSOD off and on since. I generally get them while running programs whether games or just chrome. I deceided to uninstall these programs and many have had errors running through them appart from BSOD since the first BSOD happened while they were open... I now have a Java Version 6 update 30 I cant uninstall and get error 1723. For which I cant find a solution for online.

    Basically I want to try deal with these BSOD's
    I have a number of minidump logs from these crashes

    Thanks, CJ :)

    Yeah here is the zip although I might of doubled up by clicking grab all twice. Anyway I dont really know what I am doing with this but I saw you guys helping others with BSOD so maybe you could help me :3
    Last edited by Brink; 25 Jan 2013 at 13:10. Reason: merged
      My Computer


  2. Posts : 15,026
    Windows 10 Home 64Bit
       #2

    Hi and Welcome to SevenForums.

    I've run a few dumps and 1A Memory_Management is consistent.
    Code:
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 1A, {41790, fffffa8001ad2be0, ffff, 0}
    
    Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+355d4 )
    
    Followup: MachineOwner
    ---------
    
    1: kd> !analyze -v
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    MEMORY_MANAGEMENT (1a)
        # Any other values for parameter 1 must be individually examined.
    Arguments:
    Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
    	contains the address of the PFN for the corrupted page table page.
    	On a 32 bit OS, parameter 2 contains a pointer to the number of used
    	PTEs, and parameter 3 contains the number of used PTEs.
    Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.


    The goal is to test all the RAM sticks and all the motherboard slots.

    Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

    If you get errors, stop the test and continue with the next step.

    1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
    *Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
    If this stick passes the test then go to step #3.

    2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
    *If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
    *If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
    3. Test the next stick of RAM (stick #2) in the next motherboard slot.
    *If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
    *If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
    4. If you find a stick that passes the test, test it in all the other motherboard slots.

    If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

    In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
       Information
    Errors are sometimes found after 8 passes.

       Tip
    Do this test overnight, before going to bed.
      My Computer


  3. Posts : 2
    Windows 7 Home Premium 64bit
    Thread Starter
       #3

    Thanks a lot, I'll have to get onto the testing later though as I'm getting some zzz now. It's also Australia Day tomorrow so I will reply in at least the next 2 days with the results. And thank you, any help is appreciated! :)
      My Computer


  4. Posts : 15,026
    Windows 10 Home 64Bit
       #4

    You're welcome.

    Look forward to your results :)
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 14:21.
Find Us