Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: bsod multi code errors

28 Jan 2013   #11
tjmoes

Win7 Pro
 
 

ill try again tonite


My System SpecsSystem Spec
.
28 Jan 2013   #12
carwiz

Windows 7 Pro-x64
 
 

What was the result of the SFC /scannow? Did it attempt to repair anything? Please run that again now that you've removed malware and report back any console messages.

SFC /SCANNOW Command - System File Checker

Bug Check 0x3B: SYSTEM_SERVICE_EXCEPTION
The SYSTEM_SERVICE_EXCEPTION bug check indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code. This could be caused by malware or ill-functioning Anti-virus software. Since you have removed AVG, a prime candidate for problems, there may still be malware installed.

This error has also been linked to excessive paged pool usage and may occur due to user-mode graphics drivers crossing over and passing bad data to the kernel code. Try increasing your pagefile size to 1024MB and check to see if there is any updates to your graphics drivers.
My System SpecsSystem Spec
28 Jan 2013   #13
tjmoes

Win7 Pro
 
 

no errors in the sfc my page file sz is 24178
My System SpecsSystem Spec
.

28 Jan 2013   #14
carwiz

Windows 7 Pro-x64
 
 

That should certainly be large enough. What have you run in regards to malware cleaning? Any updates to your graphics drivers?

Also, keep your scheduled appointment with memtest.
My System SpecsSystem Spec
28 Jan 2013   #15
tjmoes

Win7 Pro
 
 

ran malwarebytes found trojans it cleaned puter. av programs never found them memtest running now on 6th hour of testing no err so far
My System SpecsSystem Spec
29 Jan 2013   #16
tjmoes

Win7 Pro
 
 

well i ran test for 8 hrs and no errors 16gigs of mem is a whole lot
My System SpecsSystem Spec
Reply

 bsod multi code errors




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Window's updates errors, code 80073712 and code 9c47
I seem to be having an issue with windows updates installing, im stuck at 14 important updates, and it says some updates were not installed, and gives me error code 80073712 and code 9c47.
Windows Updates & Activation
Multiple code errors, BSOD while gaming/netflix/idle...
This has been happening for the past four months now to no avail. I get BSOD about every 1-4 days, often with different messages, but the average as of right now is 1e. Built this system in October 2010. I've always had BSOD problems, but with work getting in the way and not really using my...
BSOD Help and Support
Update errors Code 64C, 8004FF84 & 66A.
It says I need to 7 important updates to install and it fails every time. When I shut the computed down and it updates, it still fails. I've tried installing the updates one by one but it didn't help. My internet connection is working fine. I've included a screenshot. Windows 7 Home Premium...
Windows Updates & Activation
Windows Update errors Code 800B0100 and Code 8007065E, tried everythin
Hello, I am receiving the titled errors during windows update, I checked at windows support and tried every answer given there with no success. in addition, i think that this might be the cause that BattleField 3 crashes all the time.
Windows Updates & Activation
Multi-BSOD (Mainly "Modification of system code detected")
Windows 7 x64 I have installed a number of times due to OS corruption from the ridiculous amount of BSODing Retail Version of Win7 PC is almost 1 year - at least 7 months Running on this installation for around 3 months
BSOD Help and Support
9700 pro errors installing. (code 49)
Hi... I am running a 3200+ barton, 1.5GB ram, 40GB boot drive, radeon 9700 pro. 32bit win7. Cant seem to get the drivers installed for dual head, :/ Tried all sorts of different things. In safe mode it comes up with the gfx card installed but in normal mode, it keeps telling me error code...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App