Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: bsod multi code errors


26 Jan 2013   #1

Win7 Pro
 
 
bsod multi code errors

Please analyze my info, keep getting main 03b, 07e and avgidsdrivera.sys also

thank you for the help
ted

My System SpecsSystem Spec
.

26 Jan 2013   #2

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Driver Reference Table - avgidsdrivera.sys belongs to AVG IDS Application Activity Monitor Driver
Please remove AVG with AVG removal tool: AVG | Download tools and utilities
Quote:
Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-
warning   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.
Perform a System File Check:
  1. Click on the start
  2. Type CMD on Search
  3. Left click and Run as Administrator
  4. Type SFC /scannow
Full tutorial here:Disk Check on your hard drive for file system errors and bad sectors on it:Reduce items at start-up. Nothing except anti-virus is required plus improves the time for logging in windows.
System Optimisers

Please remove the following software
Code:
Start Menu\Programs\TuneUp Utilities 2013	Public:Start Menu\Programs\TuneUp Utilities 2013	Public	
Start Menu\Programs\TuneUp Utilities 2013\All functions	Public:Start Menu\Programs\TuneUp Utilities 2013\All functions	Public
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence.

If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Do this test overnight, before going to bed.

Let us know the results.
My System SpecsSystem Spec
27 Jan 2013   #3

Win7 Pro
 
 

thank you for the good info have been on the computer atleast three hrs not once has it crashed but am going to wait till end of today to be sure
My System SpecsSystem Spec
.


27 Jan 2013   #4

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Good luck
My System SpecsSystem Spec
27 Jan 2013   #5

Win7 Pro
 
 

its crashed twice once as a x024 and once as a 03b but not major crash dump like b4 have found a couple of trojans also, runnin malware now
thank you
My System SpecsSystem Spec
27 Jan 2013   #6

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Look forward to the results.
My System SpecsSystem Spec
28 Jan 2013   #7

Win7 Pro
 
 

After almost finishrunning ms sec ess. this morning bsod showed up again,
when i ran malwware bytes, ms sec ess. found some trojans and they were quarrantined. So i did another SF diag and attaching here.
My System SpecsSystem Spec
28 Jan 2013   #8

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Do this test overnight, before going to bed.
My System SpecsSystem Spec
28 Jan 2013   #9

Win7 Pro
 
 

i ran the mem test and i dont know what consitutes a pass but at topline above test number it said 26 when i stopped with no errors found
My System SpecsSystem Spec
28 Jan 2013   #10
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

How long it was? Usually it is to run overnight.
My System SpecsSystem Spec
Reply

 bsod multi code errors




Thread Tools



Similar help and support threads for2: bsod multi code errors
Thread Forum
Window's updates errors, code 80073712 and code 9c47 Windows Updates & Activation
Multiple code errors, BSOD while gaming/netflix/idle... BSOD Help and Support
Avid Mbox and other (Code 28) errors Drivers
Solved Update errors Code 64C, 8004FF84 & 66A. Windows Updates & Activation
Windows Update errors Code 800B0100 and Code 8007065E, tried everythin Windows Updates & Activation
Multi-BSOD (Mainly "Modification of system code detected") BSOD Help and Support
9700 pro errors installing. (code 49) Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:20 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33