Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD even after fresh install (Windows Update may be the cause)

30 Jan 2013   #1
Mattster

Windows 7 x64 Professional
 
 
BSOD even after fresh install (Windows Update may be the cause)

I've built a new system and after about a week of it operating it has decided to be a complete douche to me for some unknown reason. Everything was okay until I installed the SSD (so I was aware of anyway, the computer belongs to my sister and she never told me when the system used to crash, so it could have crashed before the SSD). Anyways, when I was made aware of the computer issue I checked the Event Viewer logs to see what was wrong and tehre was loads of Kernal Power issues. So I could only assume that maybe the old PSU was not good enough for all the cool new hardware, so I bought a new PSU; although the problem still persisted.

I've had more chance to observe the system today and determine what is going on. I've removed 2 HDDs from the system and kept the SSD in (I ran a health check of the SSD on my own system, and it reported it to be perfectly fine). Anyways, reformatted the SSD and everything was going well after installation. After give the OS a lovely 150 updates it BSOD on me. I read a log which suggested there was bad drivers, so I just assumed the ethernet drivers I had to manually install were incorrect (even though they worked fine before SSD upgrade). So I went to a wireless connection for the time being, did everything all over again and got the same result. At this point I determine Windows Update must be giving me grief. I installed security updates only at first, and everything was going fine. Then installed SP1, and after maybe the odd 3 more updates after SP1 it is now doing the entire damn thing all over again with crashing.

If I load Windows Update and either search for updates or implement Framwork 4 update it will BSOD, if I leave the system idle for 5 minutes after booting, it will BSOD. And it will do this no matter what I do. So I am completely stumped and would hopefully like to find some help from anyone before I start to blame the hardware. Also as a side note (as I love Safe Mode) it hasn't crashed at all in Safe Mode, so it's obvious to me it must be something that loads with the OS.

I've attached the logs that you need (hopefully).


My System SpecsSystem Spec
.
30 Jan 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hello Mattster.

Scan the system for possible virus infection. It is needed, despite of it being a clean reinstall.
Roll back to your display driver to an earlier one.
Install Service pack 1.
Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

Let us know the results. And, next time upload your MSINFO32.nfo file.
  1. Click on the start button
  2. Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
  3. File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
  4. Give the time for processing, it will save a .nfo file on your desktop.
  5. Zip it, and upload it following the instruction.
My System SpecsSystem Spec
30 Jan 2013   #3
Mattster

Windows 7 x64 Professional
 
 

Thanks for the aid, Arc.

I've ran both the Anti-root kit and Windows Defender Offline, both have reported a clean system and no issues at all; although an error would have been nice at least I could have been closer to a fix.

I'm unable to run Driver Fusion as it requires .NET Framework 4, and every time I even attempt to touch that, the system crashes or BSOD's; this even includes installing it from Windows Update and downloading the installer pack from their site. I'm even getting issues with Firefox now (still in the process of downgrading my graphics drivers as you've mentioned). Here's an msinfo32 report as you requested.

EDIT: Also if this can prove any help, even when in Safe Mode I've just tried to install Java and it just BSOD.
My System SpecsSystem Spec
.

30 Jan 2013   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Can you update the Edimax nLite Wireless USB Adapter driver?
Code:
fffff880`02478000 fffff880`02570000   netr28ux   (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\netr28ux.sys
    Image name: netr28ux.sys
    Timestamp:        Fri Jul 03 15:01:38 2009 (4A4DCFFA)
    CheckSum:         000FE3BC
    ImageSize:        000F8000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
It should be the place to get the update: MediaTek - Downloads Windows.

If you fail to update it; or if the computer crashes even after the update, try a different adapter. And if the crashes still occur with a different adapter with a latest driver, we have to take some different way to troubleshoot.
My System SpecsSystem Spec
30 Jan 2013   #5
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Why did you do a clean install instead of migrating to SSD?
Not a solution to your question but I just want to know.

Can you still boot to old win7 on harddisk and gives it the same problems?
My System SpecsSystem Spec
30 Jan 2013   #6
Mattster

Windows 7 x64 Professional
 
 

Quote   Quote: Originally Posted by Arc View Post
Can you update the Edimax nLite Wireless USB Adapter driver?
Code:
fffff880`02478000 fffff880`02570000   netr28ux   (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\netr28ux.sys
    Image name: netr28ux.sys
    Timestamp:        Fri Jul 03 15:01:38 2009 (4A4DCFFA)
    CheckSum:         000FE3BC
    ImageSize:        000F8000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
It should be the place to get the update: MediaTek - Downloads Windows.

If you fail to update it; or if the computer crashes even after the update, try a different adapter. And if the crashes still occur with a different adapter with a latest driver, we have to take some different way to troubleshoot.
Oh yes, I moved from the ethernet port to the wireless adapter because I thought the ethernet was causing the problem. Wireless is perfectly fine. It's just when I install stuff like .NET Framework, Java, or update after Windows SP1 that the system just constantly gives BSOD. And it provides different error codes each time.

Quote   Quote: Originally Posted by Kaktussoft View Post
Why did you do a clean install instead of migrating to SSD?
Not a solution to your question but I just want to know.

Can you still boot to old win7 on harddisk and gives it the same problems?
It's just a habit I've developed, if I'm required to move the OS then I'd like to just have a fresh install. As for the old Windows 7 partition on the HDD, they have been removed. One of the HDD is near on dead, and the 2nd HDD I don't really trust. I have however attempted the same methods on them as I have with the SSD. Which is just like fresh install and update everything back to the latest updates and such, and I still get the same issue. So I can only assume it will be something hardware related. I'll get back running PC check and see if that kicks anything out.
My System SpecsSystem Spec
30 Jan 2013   #7
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Mattster View Post
Quote   Quote: Originally Posted by Arc View Post
Can you update the Edimax nLite Wireless USB Adapter driver?
Code:
fffff880`02478000 fffff880`02570000   netr28ux   (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\netr28ux.sys
    Image name: netr28ux.sys
    Timestamp:        Fri Jul 03 15:01:38 2009 (4A4DCFFA)
    CheckSum:         000FE3BC
    ImageSize:        000F8000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
It should be the place to get the update: MediaTek - Downloads Windows.

If you fail to update it; or if the computer crashes even after the update, try a different adapter. And if the crashes still occur with a different adapter with a latest driver, we have to take some different way to troubleshoot.
Oh yes, I moved from the ethernet port to the wireless adapter because I thought the ethernet was causing the problem. Wireless is perfectly fine. It's just when I install stuff like .NET Framework, Java, or update after Windows SP1 that the system just constantly gives BSOD. And it provides different error codes each time.
Update the driver. As far as the other things of the system is old, it is compatible with those; but if the other elements got updated, it fails to keep up.
My System SpecsSystem Spec
01 Feb 2013   #8
Mattster

Windows 7 x64 Professional
 
 

I've had no luck what so ever with fixing this system. I removed the SSD to see if that was causing any issues and tested it on my system, the results was nothing was wrong. So I tried an old HDD for the system that is causing me problems, and as slow as it is (due to the HDD) there's little BSOD's although they still exist; even when a fresh install. I ended up downloading an application called "Who's Crashed" as I found it in someone else's post and it seems to give me a better idea as to what could possibly be the problem. As of right now I've removed one of my memory modules from the system, and updating everything from scratch again (since the system refused to load without the 2nd RAM card in). I'll report back with any new BSOD's or errors once they've occurred.
My System SpecsSystem Spec
01 Feb 2013   #9
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Have you Tried a newer network adapter?

Apparently the issue is not related with SSD or HDD. And .net framework is the most difficult thing to download via windows update. You may try an external source. Download .NET Framework Version 4.5 - FileHippo.com

Which program we do use gives much closar look at a dump than wh crashed. Download and Install Debugging Tools for Windows
My System SpecsSystem Spec
02 Feb 2013   #10
Mattster

Windows 7 x64 Professional
 
 

Thanks for the help Arc, I've finally found the source of my problems now. One of the memory modules is faulty, even though memtest reported back my memory was perfectly fine, one of the modules is actually causing the BSOD issues. I've removed the module causing the issue and all the BSOD's are gone now.
My System SpecsSystem Spec
Reply

 BSOD even after fresh install (Windows Update may be the cause)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows update fail fresh install
The error code is CODE 800B0100 Two different updates have failed
Windows Updates & Activation
BSOD c5 - while doing Windows Update after fresh Win7 install
BSOD c5 - while doing Windows Update after fresh Win7 install It was while configuring updates after system restart.
BSOD Help and Support
BSOD while trying to update drivers and windows on fresh install
I am having continuous issues with a BSOD. Here is a little basic info: Windows 7 Ultimate 64 bit (one week old install) version of windows is a OEM upgrade (installed fresh from formatted hard drive) Computer is about 2.5 years old. Hard drive is 3 months old RAM is one month old. I am...
BSOD Help and Support
When is the best time to do Windows Update in a fresh install?
Morning, I am rebuilding a workstation here and I am wonder "when" (In terms of order) do you guy run Windows Update during a bare metal reinstall of Windows 7? I currently do ALL my drivers first (and confirm all devices are working) and then move over to Windows Update. But I see some folks...
Installation & Setup
BSOD after fresh install and windows update! HELP
Hey guys, I've had my computer running flawlessly for a year now. Recently I bought a external hard drive for school (computer repair class). In class, we installed windows 7 and ubuntu as partitons on the external hard drive. I brought it home yesterday and unplugged the esata cord from my Primary...
BSOD Help and Support
7100: fresh install = BSOD, Update = well. Why?!
Cheers, ive got a Problem installing build 7100 on my pc. if i boot from dvd, iam going well until the wallpaper and the mouse appears. after 5mins of waiting here iam getting a BSOD with an 0x0000007F Error Code. If i try to install b7100 into a VM (with the DVD) it works! And if i try to...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:38.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App