Welcome to SevenForums
If you are overclocking any hardware, STOP. Reset any changed values back to default.
DISK_HARDWARE_ERROR: There was error with disk hardware
Model ST3120827AS ATA Device
Model ATA OCZ-REVODRIVE3 SCSI Disk Device
Quote: Originally Posted by writhziden
If you have an SSD, make sure the following are up to date:
- SSD firmware
- BIOS Version
- Chipset Drivers
- Hard disk controller drivers/SATA drivers
- If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
Start Menu\Programs\Symantec Endpoint Protection Public:Start Menu\Programs\Symantec Endpoint Protection Public
Please remove Norton/Symantec. Norton tends to cause BSOD-s and causes several other issues. I would recommend uninstalling it with the Norton Removal Tool and replace with Microsoft Security Essentials To Test.
Microsoft Security Essentials.
Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.
Run a full scan with both (separately) once downloaded, installed and updated.
Perform a System File Check:
- Click on the start
- Type CMD on Search
- Left click and Run as Administrator
- Type SFC /scannow
Full tutorial here:
Disk Check on your hard drive for file system errors and bad sectors on it:
Reduce items at start-up. Nothing except anti-virus is required plus improves the time for logging in windows.
Let us know the results.