Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD clean install after SSD installed

16 Feb 2013   #1
jblackwe

Windows 7 Home Premium 64bit
 
 
BSOD clean install after SSD installed

I have been reading through the forum trying to get help on my BSOD error that has been happening recently after doing a clean install of Win7 Home 64 bit. I did this bc of adding a SSD to my system and my recovery discs wouldn't work since it detected that it was a new configuration. Here are a few of the descriptions after Windows reboots:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000009f
BCP1: 0000000000000004
BCP2: 0000000000000258
BCP3: FFFFFA8009A4FB50
BCP4: FFFFF80006DB63D0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\021513-27955-01.dmp

After running windbg and memtest I still have the error but now instead of BCCode: 1000009f it is BCCode: 9f.

Details:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000004
BCP2: 0000000000000258
BCP3: FFFFFA8009A66B50
BCP4: FFFFF800060073D0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\021613-27892-01.dmp
C:\Windows\Temp\WER-29484-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Attached is results from SF Diagnostic and a notepad file with results from windbg and the BSOD error code I would get once rebooting.


Thanks for any help.


My System SpecsSystem Spec
.
16 Feb 2013   #2
jblackwe

Windows 7 Home Premium 64bit
 
 

Complete results from SF
My System SpecsSystem Spec
16 Feb 2013   #3
Dsprague

Microsoft Community Contributor Award Recipient

Windows 7 enterprise 64 bit, Windows 7 Pro 64 bit ,Windows 8 64bit
 
 

PLeas try updating this driver:

Driver Reference Table - hcw72ATV.sys

it can be updated from here: Hauppauge Computer Works : Support

or if it is from a program that you don't use any more uninstall the program.
My System SpecsSystem Spec
.

16 Feb 2013   #4
jblackwe

Windows 7 Home Premium 64bit
 
 

Thanks for your help. I am going to install the driver now and see if it helps. It was listed more than once in Windows updates, but I don't know if it was the most current version. I am assuming I need it for my USB TV tuner from HP, which is manufactured by Hauppauge. By the way, what led to this conclusion? I was trying to debug myself but don't do a whole lot of it but would like to know what to look for. Most of my computer/programming experience is in writing code for mathematical numerical models. Thanks again.
My System SpecsSystem Spec
16 Feb 2013   #5
Dsprague

Microsoft Community Contributor Award Recipient

Windows 7 enterprise 64 bit, Windows 7 Pro 64 bit ,Windows 8 64bit
 
 

Quote:
By the way, what led to this conclusion? I was trying to debug myself but don't do a whole lot of it but would like to know what to look for. Most of my computer/programming experience is in writing code for mathematical numerical models. Thanks again.
Analysis via the windbg package available from Microsoft as part of the windows SDK
My System SpecsSystem Spec
17 Feb 2013   #6
jblackwe

Windows 7 Home Premium 64bit
 
 

I had another BSOD. I downloaded the updated driver for my tuner and it installed ok. Attached is the info from the Diagnostic Tool.
My System SpecsSystem Spec
18 Feb 2013   #7
Dsprague

Microsoft Community Contributor Award Recipient

Windows 7 enterprise 64 bit, Windows 7 Pro 64 bit ,Windows 8 64bit
 
 

Alright Had a look over your new files, It is throwing a weird power state failure that I can not seems to analyze, with a quick googling around for the reason why it appears that for whatever reason the particular symbols used by the driver is not public. But that will not stop us, so Since the problem has arisen since the addition of an SSD pleas:

Insure that the Firmware is up to date, you can check the manufacturer's page for firmware updates.

Check to make sure that the power and SATA cables are seated properly

EDIT: After another another BSOD analyst took a look at the dumps he pointed out to me that your Ralink RT2860 series Wireless LAN Card driver is also causing problems, you can update the drivers from here:

http://www.ralinktech.com/en/04_supp...ort.php?sn=500
My System SpecsSystem Spec
24 Feb 2013   #8
jblackwe

Windows 7 Home Premium 64bit
 
 
Haupage update causing BSOD

Well after doing another clean install, this time using my upgrade disc of Windows 7 Ultimate, I believe I have found the culprit. I held off on installing a Windows Update from Hauppage for my TV tuner. After all service packs and drivers were update I installed this one optional update. Sure enough, a few hours after the update I had 2 more BSODs. After restoring from the recovery point before the update I have been good for almost 24 hours. PC has gone to sleep and no issues so far.

I hope this is will fix the issue for good. Thanks for your help.

Attached is info on update, not to much given from Windows update.
My System SpecsSystem Spec
25 Feb 2013   #9
Dsprague

Microsoft Community Contributor Award Recipient

Windows 7 enterprise 64 bit, Windows 7 Pro 64 bit ,Windows 8 64bit
 
 

Glad we could help out and it sounds like the manufacturer simply put out a bad update. Thanks for letting us know.
My System SpecsSystem Spec
Reply

 BSOD clean install after SSD installed




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
6 BSOD so far. New ssd installed. Clean win7 installation.
Hey all! Writing this for the second time as my comp BSOD'd while I was first writing this. :cry: So, I recently (last two weeks) installed a new SSD into my 5 year old laptop. Onto this I put a fresh windows 7 installation. Since then I've gotten 6 BSOD's as well as some random crashes that...
BSOD Help and Support
BSOD from a clean install - re-installed 3+ times... still BSOD
Hi - I would really appreciate it if someone can shed some light on my BSOD, it is driving me completely nuts. I decided to re-install my Windows 7 because I have started getting some random BSOD (not too often). When I did it the first time, I forgot to install the drivers from Asrock for HDD,...
BSOD Help and Support
BSOD in clean installed Windows 7 64 - HELP needed!
Hi, my problem symptoms is.. 98% loading memory - 4gb total. I try to find out who are eating all memories.. but didnt see anythink in task manager. I supposed it could be caused by antivirus? after I turn off antivirus bitdefender it didn't change anything. the loading of memory still where up...
BSOD Help and Support
Lenovo came with Win7 installed. How do I do a clean re-install?
My 2 year old laptop is starting to get sluggish so I'm wondering if I should try to do a clean install of my Home Premium Windows. Problem is, the computer came with no disks. Also, I'm assuming that the Backup and Restore function that's built in would only give me a copy of my crap-filled...
Backup and Restore
Random BSOD's on Windows 7 HP x64 (clean installed)
Hi there folks, I am desperate and thats why I have turned here for help. I am getting random BSOD's on a computer with clean windows 7 Home Premium 64 bits installed. I tried 32 bits aswell to rule 64bit incompatability out. also installed all newest drivers on both installs (from...
BSOD Help and Support
Installed new SSD clean install of windows7 and now experiencing slow
Last night i installed a new Solid state drive and was pleased, until i shut down the shut down time was horrible. Is this due to something happening with my secondary HDD drive? I did some tweaks to the SSD such as superfetch, paging files, drive indexing, disabled pagefile and prefetch and write...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:07.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App