Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD at random times on ASUS laptop

20 Feb 2013   #1
JessaDove

Windows 7 Home Premium 64-bit OS
 
 
BSOD at random times on ASUS laptop

I am getting the BSOD almost daily on my laptop. My computer is getting very "buggy" in other ways, as well, and I have been forced to shut down with the power button much more frequently because the screen is frozen. I uploaded my dump file from the latest BSOD. Can someone please help me?

Thanks,
Jessica


My System SpecsSystem Spec
.
20 Feb 2013   #2
JessaDove

Windows 7 Home Premium 64-bit OS
 
 
dump file -- complete this time

I don't think I posted the right attachment or it had not loaded all the files yet. Here is the dump file again ...
My System SpecsSystem Spec
21 Feb 2013   #3
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Welcome to SevenForums.

Problematic software:

Please remove the below for testing purpose:
Code:
Start Menu\Programs\McAfee Security Scan Plus	Public:Start Menu\Programs\McAfee Security Scan Plus	Public
Start Menu\Programs\Trend Micro Titanium 2012	Owner-PC\Owner:Start Menu\Programs\Trend Micro Titanium 2012	Owner-PC\Owner
Start Menu\Programs\Trend Micro Titanium 2012\More Tools and Help	Owner-PC\Owner:Start Menu\Programs\Trend Micro Titanium 2012\More Tools and Help	Owner-PC\Owner
Tip   Tip
Uninstall using Revo Uninstaller Free. Use Advanced Mode to uninstall so you can remove registry leftover of the software.


Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-
warning   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Reduce items at start-up. Nothing except anti-virus is required.Perform a System File Check to check the integrity of all protected Windows 7 :
  1. Click on the start
  2. Type CMD on Search
  3. Left click and Run as Administrator
  4. Type
    Code:
    SFC /scannow
Full tutorial here:Disk Check on your hard drive for file system errors and bad sectors on it.
BSOD Report
Code:
*** WARNING: Unable to verify timestamp for AiCharger.sys
*** ERROR: Module load completed but symbols could not be loaded for AiCharger.sys
AiCharger.sys is causing BSOD for you. Suggest you to either update or completely remove this software from your system.
Go through these threads for reference:Also update your Fresco Logic xHCI (USB3) Device Driver from here: Driver Reference Table - FLxHCIc.sys. Sometimes drivers remain, not completely uninstalled. Follow this tutorial for complete removal of drivers of the particular program:
Let us know the results and further BSOD reports if any.

BSOD BUGCHECK SUMMARY
Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8009c18e10, fffff80000b9c3d8, fffffa8006d72430}

Unable to load image \SystemRoot\system32\DRIVERS\AiCharger.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for AiCharger.sys
*** ERROR: Module load completed but symbols could not be loaded for AiCharger.sys
*** WARNING: Unable to verify timestamp for FLxHCIc.sys
*** ERROR: Module load completed but symbols could not be loaded for FLxHCIc.sys
Probably caused by : FLxHCIc.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8009c18e10, Physical Device Object of the stack
Arg3: fffff80000b9c3d8, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa8006d72430, The blocked IRP

Debugging Details:
------------------


DRVPOWERSTATE_SUBCODE:  3

IMAGE_NAME:  FLxHCIc.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  50079afe

MODULE_NAME: FLxHCIc

FAULTING_MODULE: fffff8800b4fd000 FLxHCIc

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0x9F

PROCESS_NAME:  System

CURRENT_IRQL:  2

TAG_NOT_DEFINED_c000000f:  FFFFF80000BA2FB0

STACK_TEXT:  
fffff800`00b9c388 fffff800`034e7992 : 00000000`0000009f 00000000`00000003 fffffa80`09c18e10 fffff800`00b9c3d8 : nt!KeBugCheckEx
fffff800`00b9c390 fffff800`0348294c : fffff800`00b9c4c0 fffff800`00b9c4c0 00000000`00000000 00000000`00000001 : nt! ?? ::FNODOBFM::`string'+0x33af0
fffff800`00b9c430 fffff800`034827e6 : fffff800`03628f20 00000000`0006c8c1 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x6c
fffff800`00b9c4a0 fffff800`034826ce : 00000010`26255dc0 fffff800`00b9cb18 00000000`0006c8c1 fffff800`035f7aa8 : nt!KiProcessExpiredTimerList+0xc6
fffff800`00b9caf0 fffff800`034824b7 : 00000003`25aa40c1 00000003`0006c8c1 00000003`25aa404b 00000000`000000c1 : nt!KiTimerExpiration+0x1be
fffff800`00b9cb90 fffff800`0346f94a : fffff800`035f3e80 fffff800`03601cc0 00000000`00000002 fffff880`00000000 : nt!KiRetireDpcList+0x277
fffff800`00b9cc40 00000000`00000000 : fffff800`00b9d000 fffff800`00b97000 fffff800`00b9cc00 00000000`00000000 : nt!KiIdleLoop+0x5a


STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

FAILURE_BUCKET_ID:  X64_0x9F_3_FLxHCIh_IMAGE_FLxHCIc.sys

BUCKET_ID:  X64_0x9F_3_FLxHCIh_IMAGE_FLxHCIc.sys

Followup: MachineOwner
---------

0: kd> lmvm FLxHCIc
start             end                 module name
fffff880`0b4fd000 fffff880`0b53e000   FLxHCIc  T (no symbols)           
    Loaded symbol image file: FLxHCIc.sys
    Image path: \SystemRoot\system32\DRIVERS\FLxHCIc.sys
    Image name: FLxHCIc.sys
    Timestamp:        Thu Jul 19 11:28:30 2012 (50079AFE)
    CheckSum:         000431FF
    ImageSize:        00041000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
0: kd> !irp fffffa8006d72430
Irp is active with 6 stacks 5 is current (= 0xfffffa8006d72620)
 No Mdl: No System Buffer: Thread 00000000:  Irp stack trace.  Pending has been returned
     cmd  flg cl Device   File     Completion-Context
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
 [ 16, 0]   0  0 fffffa8009c18e10 00000000 fffff8800a1c5880-fffffa8009c365d0    
	       \Driver\FLxHCIc	AiCharger
			Args: 00000000 00000000 00000000 00000002
 [ 16, 0]   0  0 fffffa8009c36480 00000000 00000000-00000000    
	       \Driver\AiCharger
			Args: 00000000 00000000 00000000 00000002
>[ 16, 2]   0 e1 fffffa8009caac70 00000000 00000000-00000000    pending
	      Unable to load image \SystemRoot\system32\DRIVERS\FLxHCIh.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for FLxHCIh.sys
*** ERROR: Module load completed but symbols could not be loaded for FLxHCIh.sys
 \Driver\FLxHCIh
			Args: 00041100 00000001 00000001 00000002
 [  0, 0]   0  0 00000000 00000000 00000000-fffffa800799a6f0    

			Args: 00000000 00000000 00000000 00000000
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
My System SpecsSystem Spec
.

21 Feb 2013   #4
JessaDove

Windows 7 Home Premium 64-bit OS
 
 
still need help

Thank you for your reply. I am apparently a newbie, because I am completely lost. How do I know whether I use the AICharger.sys driver so it is safe to remove it? If I need to keep it, where do I go to update it? I have tried all the links posted in the reply, but am just becoming more confused.

Also, where do I go to update the Fresco Logic xHCI (USB3) Device Driver, as instructed? The link provided went to a page with a lot of text and links, but nothing was there to update the driver. One link looked promising but it took me to the Fresco Logic site and said to contact the manufacturer.

Lastly, I ran the system scan as recommended and it said "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log." I attached that log for your reference.

Thank you for your help! Sorry I am not as techie and will need a little hand-holding.
My System SpecsSystem Spec
21 Feb 2013   #5
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

There's only one error in the SFC scan -
Code:
 Line 5047: 2013-02-21 11:09:07, Info                  CSI    000002f5 [SR] Repairing 1 components
 Line 5048: 2013-02-21 11:09:07, Info                  CSI    000002f6 [SR] Beginning Verify and Repair transaction
 Line 5051: 2013-02-21 11:09:07, Info                  CSI    000002f8 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 5054: 2013-02-21 11:09:07, Info                  CSI    000002fa [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 5055: 2013-02-21 11:09:07, Info                  CSI    000002fb [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
 Line 5060: 2013-02-21 11:09:08, Info                  CSI    000002fe [SR] Could not reproject corrupted file [ml:520{260},l:62{31}]"\??\C:\Windows\IME\IMESC5\DICTS"\[l:22{11}]"PINTLGB.IMD"; source file in store is also corrupted
 Line 5073: 2013-02-21 11:09:08, Info                  CSI    00000300 [SR] Repair complete
I'll post a fix protocol for it a bit later.
My System SpecsSystem Spec
21 Feb 2013   #6
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - jdaaa.zip - to my SkyDrive at Noel's SkyDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)
Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\jdaaa
hit the enter key - if you get a 'Not Found' error try
DIR D:\jdaaa
or
DIR E:\jdaaa


The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\jdaaa <drive>:\windows\winsxs /y /i /s /v /h

(e.g.XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time)and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your SkyDrive Public folder, and post a new link

Also run a new MGADiag report, and post the result.

My System SpecsSystem Spec
21 Feb 2013   #7
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

For FrescoLogic, see here: FRESCO LOGIC INC.===Leap into SuperSpeed===

For AI charger, See here: ASUSTeK Computer Inc. -Support- Drivers and Download P6T under Utilities. But the update is not an updated version actually. To uninstall it, uninstall ASUS AI Suite in Control Panel > Programs and Features.
My System SpecsSystem Spec
04 Mar 2013   #8
JessaDove

Windows 7 Home Premium 64-bit OS
 
 
still having BSODs

I am still having BSODs. I deleted the AICharger.sys, as instructed. However, when I did that, I was no longer able to print or charge my cell phone or update my ipod on the computer. All of the USB chargers no longer worked. So I went online and downloaded the USB Charger Plus for Windows 7 64-bit, and that fixed the issue of my USB chargers not working. But the very next day (today) I had a BSOD.

See attached for the mini dump file.

Please help! I cannot go without my USB ports working, but I need to eliminate these BSODs.

Thanks.
Jessica
My System SpecsSystem Spec
04 Mar 2013   #9
JessaDove

Windows 7 Home Premium 64-bit OS
 
 
file again

Here is the dump file again. For some reason, it keeps adding to it even after it says it's done. Hopefully this one is the complete file.
My System SpecsSystem Spec
04 Mar 2013   #10
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Have you run the fix I posted?
Please post the new CBS log - compress it and attach it here.
My System SpecsSystem Spec
Reply

 BSOD at random times on ASUS laptop




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD on Asus Laptop, The bugcheck was: 0x00000050
Hi there, first time posting. I'm having an issue with my laptop, Asus U50F. Keep getting random BSOD, thought it was a windows problem so I reinstalled windows 7 pro on a fresh SSD. Used memtest86+ to check ram and all tests ran fine. Not sure where to look for problems. I've attached my SF...
BSOD Help and Support
BSOD at random times, laptop acer aspire
Hello everyone! So my problem started about two to three weeks ago when my computer started to show a BSOD at random times. I mean I cannot detect some kind of pattern, e.g. when I open a program etc, it just happens sometimes even when it is just on standby without running anything! I've tried a...
BSOD Help and Support
BSOD at random times on new laptop
Hi sevenforums, I bought a Toshiba Satelite laptop last month and everything was working fine up until 2 or 3 days ago. Since then I have had a few BSOD messages, all when I've been doing different things (surfing the internet, playing Football Manager etc.) I was wondering if you'd be able...
BSOD Help and Support
BSOD/sudden lag when working/gaming(random times)(Oc Asus P8P67 pro)
hello all , I have been reading in this fourm about the problem but i didnt reach to any lead so far i have a system which i got 1 month ago and it was stable and good till recently i started getting BSOD at random times , i tried to update my bios as most were saying but i couldnt because...
BSOD Help and Support
Random BSOD on Asus laptop
I have been having this problem for about a week now. For some reason my laptop keeps crashing randomly. Sometimes I'll bring it out of hibernation, and see that it restarted from a crash. Just now it crashed while trying to update my video card drivers. Here is the mini dump file associated...
BSOD Help and Support
Random BSOD/reboot on ASUS laptop - nvlddmkm.sys error
I've been dealing with this problem for a week now. Everything works fine in safe mode, but when I boot into normal mode, it's like a 50/50 chance that it will even let me boot into the OS. It would either just reboot, or if/when it does get into the OS, the system would be very slow &...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 17:57.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App