BSOD rendering in Max Design 2013 + also occasional random


  1. mcgeeza
    Posts : 2
    Windows 7 Professional 64
       New #1

    BSOD rendering in Max Design 2013 + also occasional random


    Hi,

    I've been getting BSODs while trying to render in Max and Vray. Happens every time so I can't finish the render.

    I have been getting the occasional random BSOD too (outside of Max) for a while now so I suspected that something was wrong. Please help!
      My Computer
    Quote Quote

  3. Skylais
    Posts : 614
    Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
       New #2

    1st try updating windows using windows update.
    secondly, i want you to run this RAM - Test with Memtest86+
    Then report back if your ram is clean.
    As well, unplug any usb device for a bit.
    in start type "device manager" and look for any drivers with a yellow mark near them.
    what usb devices do you have in?
      My Computer
    Quote Quote

  4. mcgeeza
    Posts : 2
    Windows 7 Professional 64
    Thread Starter
       New #3

    Hi,

    Sorry for the delay in replying.

    The windows auto update had been failing so there was a lot of updates needed. After installing these I managed to render a few times, bit then the BSODs started again, although there doesn't seem to be any reference to USB in the new dumps so the update seems to have done something.

    I ran 8 passes of memtest over the weekend and got no errors.

    The only USB devices I have in now are MS Intellimouse Explorer 3.0, a TP Link 300mbps Mini Wireless N USB Adapter (which is new and the PC was crashing before this) and the VRAY WIBU Key dongle (which I have just updated the drivers, to see if it stopped the BSODs).

    I've attached the latest 3 minidumps.

    Thanks for your time.
      My Computer
    Quote Quote

 

  Related Discussions
Occasional random BSOD
in BSOD Help and Support

Hi, I'm getting these occasionally. I've run chkdsk (and repair) but the problem persists. Grateful for any tips. Miguel
Random reboots. Occasional BSOD log.
in BSOD Help and Support

Hello. I've been having strange issues with my media center PC. I've never seen the machine restart since it is mainly a server and is headless. I'm not sure if it "Bluescreens" every time, but occasionally it will create a dump file that I can open in BlueScreenView. I've replaced the CPU,...
Random BSOD while doing 3D rendering.
in BSOD Help and Support

I was rendering a scene in Softimage and watching YouTube at the same time. Oddly, I got a BSOD. I never got one while rendering. Please note, when Softimage renders it uses up all CPU resource. Intel 3770K 3.5Ghz 16GB XMS 3 Corsair Ram Sapphire AMD HD 7950 3GB
Random restarts and occasional BSOD's
in BSOD Help and Support

My pc keeps restarting on its own, most of the time the screen just blurs with vertical lines going across the screen but there are 1 off BSOD's. It is a custom built PC with specs on my profile or below. Please help :cry:
I get this BSOD when I leave my computer to render videos on sony vegas overnight. It usually doesn't give me the BSOD, but every third time I leave it overnight to render it gives me this BSOD. It has started doing it after I overclocked my CPU to 4GHz from 3.2GHz only by chancing my FSB from 200...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 13:23.
Find Us