Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD error after ~30 minutes on


16 Mar 2013   #21
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

In that case, dont need to run memtest again.

Update the display driver. If the BSODs even occur, we will guide you through the BIOS update; and it does not need any HDD formatting at all


My System SpecsSystem Spec
.

18 Mar 2013   #22

Window 7 home premium 64 bit
 
 

I still having BSOD event after updating the driver... here I attached the zip file... when BSOD it say cause by tcpip.sys and intelppm.sys...
My System SpecsSystem Spec
18 Mar 2013   #23
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Stress test the CPU.
Hardware - Stress Test With Prime95

As intelppm.sys is involved, this check is needed.

Tcpip.sys error may cause due to various reasons. Will get home back within two hours and will check what is there behind the tcpip.sys failure.
My System SpecsSystem Spec
.


18 Mar 2013   #24

Window 7 home premium 64 bit
 
 

thanks you... i will do the test and post the result later on...
My System SpecsSystem Spec
18 Mar 2013   #25

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x86 Service Pack 1 - Linux Mint Mate 14 x64
 
 

Code:
BugCheck D1, {0, 2, 1, fffff8800165dd72}

*** WARNING: Unable to verify timestamp for JME.sys
*** ERROR: Module load completed but symbols could not be loaded for JME.sys
Probably caused by : JME.sys ( JME+11026 )
Code:
2: kd> lmvm JME
start             end                 module name
fffff880`04263000 fffff880`0427e000   JME      T (no symbols)           
    Loaded symbol image file: JME.sys
    Image path: \SystemRoot\system32\DRIVERS\JME.sys
    Image name: JME.sys
    Timestamp:        Fri Aug 14 07:35:51 2009 (4A8505C7)
    CheckSum:         0001E6EE
    ImageSize:        0001B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your JMicron PCI Express Gigabit Ethernet Adapter driver seems to be causing some problems, and is very outdated, this may also be the cause behind the TCPIP.sys being referenced in one of the BSODs.

Here's some additional information:Update from here - Driver
My System SpecsSystem Spec
18 Mar 2013   #26
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Cheers, my friend !!!!
It is the thing behind the tcpip.sys error, and you found it rightly

I would also suggest to update ELAN PS/2 Port Smart Pad driver.
Code:
fffff880`02c9d000 fffff880`02cbf000   ETD      T (no symbols)           
    Loaded symbol image file: ETD.sys
    Image path: \SystemRoot\system32\DRIVERS\ETD.sys
    Image name: ETD.sys
    Timestamp:        Thu Oct 15 14:53:18 2009 (4AD6EA06)
    CheckSum:         00023C0B
    ImageSize:        00022000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
It is causing all the i8042prt errors here. Update it from ELAN Microelectronics Corp.

Update your ATI/AMD display driver.
Code:
fffff880`04801000 fffff880`053b4000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Sat Nov 17 01:48:02 2012 (50A69F7A)
    CheckSum:         00B65E3C
    ImageSize:        00BB3000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
You can get it from the link in our forum, Latest AMD Catalyst Video Driver for Windows 7, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.


During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.

Let us know the results.
My System SpecsSystem Spec
18 Mar 2013   #27

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x86 Service Pack 1 - Linux Mint Mate 14 x64
 
 

Your welcome Archie and good work with the other drivers
My System SpecsSystem Spec
18 Mar 2013   #28
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

As we say, we are a team, The BSOD Team
My System SpecsSystem Spec
18 Mar 2013   #29

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x86 Service Pack 1 - Linux Mint Mate 14 x64
 
 

Quote   Quote: Originally Posted by Arc View Post
As we say, we are a team, The BSOD Team
My System SpecsSystem Spec
18 Mar 2013   #30

Window 7 home premium 64 bit
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Code:
BugCheck D1, {0, 2, 1, fffff8800165dd72}

*** WARNING: Unable to verify timestamp for JME.sys
*** ERROR: Module load completed but symbols could not be loaded for JME.sys
Probably caused by : JME.sys ( JME+11026 )
Code:
2: kd> lmvm JME
start             end                 module name
fffff880`04263000 fffff880`0427e000   JME      T (no symbols)           
    Loaded symbol image file: JME.sys
    Image path: \SystemRoot\system32\DRIVERS\JME.sys
    Image name: JME.sys
    Timestamp:        Fri Aug 14 07:35:51 2009 (4A8505C7)
    CheckSum:         0001E6EE
    ImageSize:        0001B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your JMicron PCI Express Gigabit Ethernet Adapter driver seems to be causing some problems, and is very outdated, this may also be the cause behind the TCPIP.sys being referenced in one of the BSODs.

Here's some additional information:Update from here - Driver
Thanks a lot both of you... but I cannot download the driver from there..
My System SpecsSystem Spec
Reply

 BSOD error after ~30 minutes on




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:43 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33