BSOD error after ~30 minutes on

Page 1 of 6 123 ... LastLast

  1. Posts : 27
    Window 7 home premium 64 bit
       #1

    BSOD error after ~30 minutes on


    I encounter BSOD problem just after 30 min on the laptop(not exactly 30min)
    Not so sure what is the main problem... But it does happen frequently...
    by using bluescreenviewer i can see that this type of BSOD is always occur

    A problem has been detected and Windows has been shut down to prevent damage
    to your computer.

    The problem seems to be caused by the following file: ntoskrnl.exe

    DRIVER_IRQL_NOT_LESS_OR_EQUAL

    If this is the first time you've seen this stop error screen,
    restart your computer. If this screen appears again, follow
    these steps:

    Check to make sure any new hardware or software is properly installed.
    If this is a new installation, ask your hardware or software manufacturer
    for any Windows updates you might need.

    If problems continue, disable or remove any newly installed hardware
    or software. Disable BIOS memory options such as caching or shadowing.
    If you need to use safe mode to remove or disable components, restart
    your computer, press F8 to select Advanced Startup Options, and then
    select Safe Mode.

    Technical Information:

    *** STOP: 0x000000d1 (0x0000000000000001, 0x0000000000000002, 0x0000000000000008,
    0x0000000000000001)

    *** ntoskrnl.exe - Address 0xfffff800032e2c40 base at 0xfffff80003266000 DateStamp
    0x4e02aaa3

    and

    A problem has been detected and Windows has been shut down to prevent damage
    to your computer.

    The problem seems to be caused by the following file: USBPORT.SYS

    DRIVER_IRQL_NOT_LESS_OR_EQUAL

    If this is the first time you've seen this stop error screen,
    restart your computer. If this screen appears again, follow
    these steps:

    Check to make sure any new hardware or software is properly installed.
    If this is a new installation, ask your hardware or software manufacturer
    for any Windows updates you might need.

    If problems continue, disable or remove any newly installed hardware
    or software. Disable BIOS memory options such as caching or shadowing.
    If you need to use safe mode to remove or disable components, restart
    your computer, press F8 to select Advanced Startup Options, and then
    select Safe Mode.

    Technical Information:

    *** STOP: 0x000000d1 (0x00000000504564e0, 0x0000000000000002, 0x0000000000000000,
    0xfffff88002efec55)

    *** USBPORT.SYS - Address 0xfffff88002efec55 base at 0xfffff88002eec000 DateStamp
    0x4ce7a670

    do tell me if i need to attach any minidump or not??
    and bluescreen never happen if I on with my battery only but if I plug in charger bluescreen do appear
    thanks in advance
    Last edited by alien5555; 10 Mar 2013 at 11:51. Reason: adding reasons
      My Computer

  2.   My Computer


  3. Posts : 27
    Window 7 home premium 64 bit
    Thread Starter
       #3
      My Computer

  4.    #4

    Code:
    BugCheck 3B, {c0000005, fffff800032d8f93, fffff88003853f20, 0}
    
    Probably caused by : hardware ( nt!ExpReleaseResourceForThreadLite+13 )
    Code:
    Usual causes:  System service, Device driver, graphics driver, memory
    Code:
    2: kd> !error c0000005
    Error code: (NTSTATUS) 0xc0000005 (3221225477) - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    Install and perform full scans with:

    Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system.

    You can also view this thread for a complete free and lightweight security protection combination:

    Memory:

    Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

    Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

    Test each RAM stick and every motherboard DIMM slot available.

    Remove:

    Code:
    Start Menu\Programs\TuneUp Utilities 2012
    Start Menu\Programs\TuneUp Utilities 2012\All functions
    Windows 7 doesn't require any programs which make changes to the operating system and registry, these programs tend to cause problems by modifying and deleting files.

    Remove:

    Code:
    Start Menu\Programs\ASUS
    Start Menu\Programs\ASUS Utility\ASUS Live Update
    Start Menu\Programs\ASUS Utility\SmartLogon
    This motherboard bloatware, which can slow down and corrupt your system.

    Reduce the number of programs at startup, to avoid any driver or program conflicts:
      My Computer


  5. Posts : 27
    Window 7 home premium 64 bit
    Thread Starter
       #5

    thanks for your time...all item listed for remove had been removed... preparing for RAM test..:)
      My Computer

  6.    #6

    Your welcome, please post your results when you have completed the test.
      My Computer


  7. Posts : 27
    Window 7 home premium 64 bit
    Thread Starter
       #7

    I had done the memtest... I let it to do until 18 pass..no error detected.. but sadly there are still BSOD occur to my laptop..do it relate to other hardware like hard disk or motherboard...

    sorry for my bad photo
      My Computer

  8.    #8

    Perform the full scans with the scanners provided first, and then we can look into other options.
      My Computer


  9. Posts : 27
    Window 7 home premium 64 bit
    Thread Starter
       #9

    x BlueRobot said:
    Perform the full scans with the scanners provided first, and then we can look into other options.
    if u mean the two scanner, Malwarebytes : Free anti-malware and Microsoft Security Essentials, I have scan and no virus/malicious detected.. do I need to scan with the other scanners?

    I will perform full scan again
      My Computer

  10.    #10

    You could scan with SuperAntiSpyware will is provided within the Good Security Combination link, and let's begin testing the hard-drive for any issues:

    Run some hard-drive diagnostics and follow these steps:

    Find your hard-drive manufacturer and run their tests.

    Additional Tests:

    Post a screenshot of Crystal Disk Info summary:

    writhziden said:
    If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
    Check for any file system errors and bad sectors using Option #2 of:

    Use this command with Disk Check:

    Code:
    chkdsk C: /f /r
      My Computer


 
Page 1 of 6 123 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:28.
Find Us