Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random bluescreens with different messages

10 Mar 2013   #11
TwoCables

 

I'm waiting for people to come in who know how to interpret the SF Diagnostic tool.


My System SpecsSystem Spec
.
10 Mar 2013   #12
Samekh922

Windows 7 ultimate x64 Build 6_1_7601
 
 

Quote   Quote: Originally Posted by TwoCables View Post
I'm waiting for people to come in who know how to interpret the SF Diagnostic tool.
Ahh i see, thank you very very much! D: I appreciate your help.
My System SpecsSystem Spec
12 Mar 2013   #13
Samekh922

Windows 7 ultimate x64 Build 6_1_7601
 
 

hmm? D:
My System SpecsSystem Spec
.

12 Mar 2013   #14
Samekh922

Windows 7 ultimate x64 Build 6_1_7601
 
 

Oh i forgot to say that sometimes i get BSODS also when im shutting down my pc.
1. They only occur when booting
2. They only occur when shutting system down.
3. When i surfing on interned or idling.
4.Never when gaming or doing any other intensive tasks. Games run fine with heavy settings and 3dmark11 wont crash my system.
My System SpecsSystem Spec
13 Mar 2013   #15
TwoCables

 

Ok, well since I'm the only one who wants to help, I guess I'll just continue assuming that this is a problem with the CPU's core voltage.

Download, extract, and open CPU-Z from here: CPUID - System & hardware benchmark, monitoring, reporting (this is a direct link to the .zip file containing CPU-Z)

Let your computer idle and report the voltages you see in CPU-Z.
My System SpecsSystem Spec
13 Mar 2013   #16
Samekh922

Windows 7 ultimate x64 Build 6_1_7601
 
 

Quote   Quote: Originally Posted by TwoCables View Post
Ok, well since I'm the only one who wants to help, I guess I'll just continue assuming that this is a problem with the CPU's core voltage.

Download, extract, and open CPU-Z from here: CPUID - System & hardware benchmark, monitoring, reporting (this is a direct link to the .zip file containing CPU-Z)

Let your computer idle and report the voltages you see in CPU-Z.
I did what you asked and also included the temps from speccy.
My System SpecsSystem Spec
13 Mar 2013   #17
TwoCables

 

Hmm. There's a chance that increasing the core voltage might help. This will raise it for all loading conditions from idle to full. Here's how to do it without changing the actual behavior where it sits nice and low while idling:
  1. Reboot
  2. Hold down the Delete key during the actual reboot of your motherboard (the point right before you see the motherboard booting back up). You can release it when you get the UEFI BIOS to start up.
  3. Click "Exit/Advanced Mode" on the top-right
  4. Choose "Advanced Mode"
  5. Switch to the "Ai Tweaker" tab (click it or press the Right Arrow key on your keyboard)
  6. Click "DIGI+ VRM" in the list of options
  7. Inside the DIGI+ VRM area, scroll down - or press Page Down - to "CPU Offset Voltage".
  8. Where it says "Auto", type 0.005 and press Enter
  9. Press F10 to save and exit
If you can successfully get into Windows, then report what core voltage you see in CPU-Z while your computer is idling. In Windows, you can use Alt+Print Screen to take a screenshot of only the active window. I'm just curious about how much of a difference it made from 0.0872V.

If you can't get into Windows using this offset voltage of +0.005V, then go back and use 0.010 and try again. If that doesn't get you into Windows, then use 0.015 and try again. If that doesn't get you into Windows, then try 0.020 and try again.
My System SpecsSystem Spec
13 Mar 2013   #18
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Not happy to see you again, Samekh992

Follow all the nice suggestions you have received from TwoCables. At the same time, if you two allow me, I would suggest you two more things.

As you are saying that mostly the BSODs happen after boot animation, you need to Troubleshoot Application Conflicts by Performing a Clean Startup. Free up the startup.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept then restart.
Also, got this one from your Crash Dump:
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

BAD_POOL_CALLER (c2)
The current thread is making a bad pool request.  Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 000000000000109b, (reserved)
Arg3: 0000000009ac01b8, Memory contents of the pool block
Arg4: fffffa8008c34cc0, Address of the block of pool being deallocated
According to Carrona.org, STOP 0x000000C2: BAD_POOL_CALLER
Usual causes: Device driver, Memory

So better we take precautions in those areas, too. Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it comes clean, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any.

@ TwoCables, I always noticed you do great troubleshooting. Proud to have a knowledgeable person like you with us. If anytime any specialized people is needed to have an extra eye, just call @ More help requested [5] Saying it for your post #11 here .... you can call them anytime
My System SpecsSystem Spec
13 Mar 2013   #19
TwoCables

 

Wow, Arc! Thank you for telling me about the More Help is Requested thread!

Regarding Samekh922's issue: he's getting random BSODs in low-load situations. So my guess is the core voltage is never high enough for these situations in order to keep the system stable. The only thing wrong with this diagnosis is everything is at stock and no changes have been made! Oh my head hurts. hehehe
My System SpecsSystem Spec
13 Mar 2013   #20
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Be here
I am sure that your guidance will be enough to recover Samekh922's issue. I am also here, if there are any more crash dumps to read
My System SpecsSystem Spec
Reply

 Random bluescreens with different messages




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random nvlddmkm.sys bluescreens
Hi, I've had this problem for about a year now, having tried most solutions on the internet. None of them seem to work thus far, however. If I use any newer driver other than 260.99, my pc will randomly give blue screens. Either when my computer just booted up, or after a few hours. I...
BSOD Help and Support
random bluescreens ntoskrnl.exe
still having these problems, but went ahead and did a more thorough job of documenting the errors. have had 2 in the last 12hrs. this is simply unacceptable. have a crappy laptop that is like 3 years older than this, (my gaming machine) that is trouble free. windows 7 ultimate x64 6gigs of...
BSOD Help and Support
random freezing and random bluescreens with various error codes
I've contacted tech support at cyberpowerpc where I bought my computer, but after reading their tech support forums my faith in getting a quick response is kind of low, so I came here as many bluescreen search results lead here and I figure it's probably a good place to get more help. I've been...
BSOD Help and Support
Random Bluescreens
I've bougt a new pc about 1 month back and i've had several BSOD's. I've got Windows 7 home premium 64bits as originally installed OS in my system. Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_rtm.101119-1850) Language: Dutch...
BSOD Help and Support
Random Bluescreens
Hey! I've been searching a solution for my bluescreens and then I found these forums. So I decided to ask for help. I have got bluescreens randomly since I bought my computer around 4 months ago. When I first got my computer I was getting few bluescreens every week, but after I bought a...
BSOD Help and Support
Random Bluescreens
Hello, I am new to this forum but in a desperate cry for help I signed up hoping someone could figure this out. I recently built a new computer with brand new parts and had a fresh clean install of windows 7 . And every so often it will just randomly bluescreen for no reason... here is the even log...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:46.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App