Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: critical structure bsod

17 Mar 2013   #11
x BlueRobot

 

Yeah it's completely normal, and can upload the results from SFC /SCANNOW command, and have you tried running CHKDSK from command prompt at boot?

Read Option 3 for uploading the results:


My System SpecsSystem Spec
.
17 Mar 2013   #12
bigdog4215

windows 7 home premium x64
 
 

I had to rerun the sfc cause when I brought the last one to the desk top it was empy and I'm gonna run check disc at boot right now.
My System SpecsSystem Spec
17 Mar 2013   #13
bigdog4215

windows 7 home premium x64
 
 

Chkdsk said windows did not find any problems but it said it failed to transfer logs with status 50
My System SpecsSystem Spec
.

18 Mar 2013   #14
x BlueRobot

 

There doesn't seem to be any problems with your system files, and if no problems were found, then it should be fine to continue. Here's some explanation for the error code:
My System SpecsSystem Spec
18 Mar 2013   #15
x BlueRobot

 

memory_corruption doesn't necessary mean that a RAM module is faulty, it can also point to a object which corrupted the RAM at the time of the crash, for instance a corrupted driver or program. Paging files and the CPU caches can also be causes.

Follow these steps -

Test for any corrupted drivers, by running Driver Verifier for least 24 hours, stop the test if a BSOD occurs before this time frame. Driver Verifier will place stress on the drivers within your system, which will cause corrupted drivers to crash and hopefully be pinpointed. More Help and Information with Driver Verifier - Using Driver Verifier to identify issues with Drivers

Memory:Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.
My System SpecsSystem Spec
18 Mar 2013   #16
bigdog4215

windows 7 home premium x64
 
 

It bsod again and now its trying to attempt repairing but it doesn't seem like its working.Its been trying for about 10 minutes now,any suggestions.


well it finished but was unsuccessful and asked me send or not send then clicked finish and it shut down.
My System SpecsSystem Spec
18 Mar 2013   #17
bigdog4215

windows 7 home premium x64
 
 

I booted back up and disabled driver verifier and used the sfc tool to create a file so here it is
My System SpecsSystem Spec
19 Mar 2013   #18
x BlueRobot

 

Code:
BugCheck 109, {a3a039d8991b6504, b3b7465eeb9834ca, fffff80002b1afdd, 1}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+30d0 )
Code:
Usual causes:  Device driver, Breakpoint set with no debugger attached, Hardware (Memory in particular)
Complete the memory test, and then to beginning to test the CPU.Enable "Round off checking" before the test (see first post below tutorial).
My System SpecsSystem Spec
24 Mar 2013   #19
bigdog4215

windows 7 home premium x64
 
 

I ran memtestx86 for 13 passes and no errors were found with both sticks of ram in,do I still need to test each stick individually.I was reading about the stress test with prime95 and it said I should monitor my temps but I do not know what would be considered high temps.
My System SpecsSystem Spec
24 Mar 2013   #20
x BlueRobot

 

There seems to be no problems with your RAM, and I wouldn't recommend going above 80*C with Prime95.
My System SpecsSystem Spec
Reply

 critical structure bsod




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Modification of a System Code or Critical Data Structure BSOD
Edit: the Dump files are in post #3. Thanks for any assistance.
BSOD Help and Support
BSOD after Windows Critical Update
Hi, I keep getting a BSOD after a Windows Critical update. I didn't get a chance to write down the error number, but I was able to run the SF diagnostic tool and retrieve the latest crash dump (attached). If that doesn't work, please let me know and I'll repost next time it happens. I keep...
BSOD Help and Support
BSOD after Windows critical update
Hi to everyone. I'm having trouble with a critical update, I keep getting BSOD after is completed and then I must restore to a previous point. I followed the instructions for using the SD Diagnostic Tool, but when I executed the application it said there wasn't any dump file. Please let me...
BSOD Help and Support
BSOD critical object termination
I don't know what had happened to my computer but it just had BSOD suddenly 021312-15085-01.dmp here is the dmp file and i wish someone can help me with this, im about to explode ps: i just installed drop box 30min ago before the bsod happened during restart
BSOD Help and Support
BSOD F4 Critical Object Termination
Need help solving this problem. Machine occasionally crashes w BSOD at start of day. After reboot (sometimes needing to boot in "safe" mode) machine works fine the rest of day. Can't seem to find a pattern. I have uploaded the perfmon and BSOD Files Gateway SX 2850 Windows 7 Home Premium...
BSOD Help and Support
BSOD after critical windows update!!!
hi guys and girls did a critical update it was a sercurity update for 64 bit systems and it gives the bsod and wont let me log in i have tried two different system restore points and it fails and still bsod. i dont think its a virus related problem since it just happened after i did an update but...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:57.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App