Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD 0x124

13 Mar 2013   #1
cestlavie098

Win7 Ultimate x64
 
 
Random BSOD 0x124

No abnormal memory test.
sometimes computer is freeze. no bsod.
I do not know what the problem is.
plz help me.


My System SpecsSystem Spec
.
13 Mar 2013   #2
Dsprague

Microsoft Community Contributor Award Recipient

Windows 7 enterprise 64 bit, Windows 7 Pro 64 bit ,Windows 8 64bit
 
 

Hello and welcome to the forums cestlavie098, I took a look at your files, and so you know a 0x124 BSOD indicates either a Bios bug or a hardware error. So first things first, check the computer manufacturers website for Bios updates. then once you have updated the bios please run Prime95:

Free Software - GIMPS
Quote:
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.
Also when running prime 95 be sure to use HWinfo to keep an eye on your temperatures:

Quote:
Download and install HWINFO64 (I run Windows 7 Ultimate x64). Open HWINFO, and when prompted, check the Sensor Only option and then run as shown below:


HWINFO will read your system, and then open the Sensor Status panel. Locate the CPU Digital Thermal Sensor items, as shown below:


Take note of the current temperatures when the system is idling, and ensure that there is a differential between the system idle temperature and maximum CPU operating temperature in excess of 20 degrees Celcius

Warning
Ensure that you are operating in the same units of temperature measurement! If your CPU maximum temperature is quoted in Celcius, make 100% sure HWINFO is also reporting in Celcius. Do not mix Celcius with Farenheit. Use the Configure button in HWINFO to change temperature units if neccessary.

My System SpecsSystem Spec
13 Mar 2013   #3
cestlavie098

Win7 Ultimate x64
 
 
thank you. Dsplague

BIOS is latest.
I'll run prime95.
I had been overclocking. Not now.
At that time there was no problem,
So, maybe there is a problem with the CPU.
My System SpecsSystem Spec
.

13 Mar 2013   #4
Dsprague

Microsoft Community Contributor Award Recipient

Windows 7 enterprise 64 bit, Windows 7 Pro 64 bit ,Windows 8 64bit
 
 

Over clocking can cause all sorts of odd problems, let it run normally without over clocking and see if you still get the BSOD. IF you still get it without over clocking then run prime95
My System SpecsSystem Spec
Reply

 Random BSOD 0x124




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD BCCode 0x124 0x0
So I started getting random BSOD overnight about 4 days ago from BCCode 124 and spent the better half of the past 3 days hunting it down and now suspect it to be CPU fault. I ran though the basics clean install, driver updates, memtest64 for 6 hours no errors, and etc found some faulty drivers...
BSOD Help and Support
Random idle BSOD 0x124 @ ntoskrnl.exe. ~Once / day
The dreaded 124 error again... Crashing in either the NTOSKrnl.exe or Hal.exe Completely new system with the following hardware: Motherboard: Asrock B75 Pro-M CPU: Intel i5 3570K Mem: Kingston ValueRAM 1x 4GB 1333MHz Disk: Samsung 120GB 840 SSD GPU: Internal Intel HD Graphics 4000 OS:...
BSOD Help and Support
BSOD 0x124 (Random, comes more frequently during load)
Hey! Im kinda new here and I really need some help. I have been having random 0x124 BSOD on my newly built computer. So far I haven't seen any connecting between the BSODs, they come both when im not doing anything with the computer and when I am gaming. (Im not overclocking) So here is...
BSOD Help and Support
BSOD 0x124 random occurences
Hey guys, I am currently putting up a new system and trying to determine what the cause of my BSOD is. I am running an MSI Z77A-G45 I7 3770K Ballistix 8GB DDR3 - 1600 OR Mushkin Enchanced 8GB 2X4GB PC3-10666 DDR3-1333 9-9-9-24 Dual Channel 560 GTX Gigabyte 3 TB WD Green 60 GB OCZ Agility...
BSOD Help and Support
BSOD error 0x124, random intervals
I am having random BSODs for almost a week now and it can happen either when playing Dota 2, BF3 or even just watching a stream or Youtube vid. The STOP error I'm getting is 0x00000124 My dump files are attached, any help would be appreciated. Thanks
BSOD Help and Support
Random BSOD's BCCode 0x124
Hi, I have been experiencing random reboots/BSOD's today with the error code 0x124 pointing to ntoskrnl.exe. So far I've had 3 of these incidents today. The BSOD seems to occur irregularly when gaming, although the first crash today was when trying to run Steam. Besides that the crashes don't...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App