Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 7f, frequent during loads, not ram

18 Mar 2013   #11
Phaerius

Windows 7 home premium 64 bit
 
 

Just got done a seven hour ram test, 0 errors reported. Going to be swapping a friends card into my compy and testing it under the conditions that cause my issue. Here are some of the little things that have cropped up recently that may lead to it being graphics card.

My computer sometimes hardlocks when I am alt-tabbed from a full screen program, and I close a tab in chrome, the instant I click to close the tab it locks. My display driver crashes when I zoom-in out from a picture, any picture, in windows photo viewer. Crashes during load are frequent, usually at the very end of the load, possibly when graphics are starting to be rendered. Hardlocks are most frequent in games with graphics turned near max, and have gotten much more frequent in general since I switched to a higher resolution monitor. Things I ran previously fine at a lower resolution are now hard-locking.


My System SpecsSystem Spec
.
19 Mar 2013   #12
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Also, run sfc /scannow SFC /SCANNOW Command - System File Checker use option 2. It is to verify and attempt to repair damaged system files. It will not affect any of your other programs. let us know about the other graphics card. Also, what is the wattage and amps on the +12v rail of your PSU. It will be on a sticker on the PSU.
My System SpecsSystem Spec
19 Mar 2013   #13
carwiz

Windows 7 Pro-x64
 
 

Follow the instruction here: Blue Screen of Death (BSOD) Posting Instructions
Be sure to click the Grab All on the utility. We need the rest of the files to complete the analysis--Especially MSINFO. The 0x7f is often caused by hardware or two drivers competing for the same hardware.

Also, check to see if you have this update installed: KB2032276
My System SpecsSystem Spec
.

19 Mar 2013   #14
Phaerius

Windows 7 home premium 64 bit
 
 

As I've said in the first post, when I run the program I receive an exception, the progress bar ceases to move further. Also, I've run sfc scannow in the last 2-3 days, no changes to the issue.

I can however grab my own msinfo, one moment.

Also, this is the exact model of my gtx 460, or it should be.

http://www.zotacusa.com/synergy-gefo...40401-10h.html
My System SpecsSystem Spec
19 Mar 2013   #15
carwiz

Windows 7 Pro-x64
 
 

You're getting double fault memory stack errors from the display driver but I suspect that's just because memory may be corrupted by AVG. It's notorious for walking all over memory. Un-install AVG since you have MSE. You should never run more that one real-time AV. I would also suggest you un-install Adaware and make use of the security features already included in your browser. If you continue getting BSODs, Un-install DAEMON Tools Lite.

Also, in the future, let the BSOD utility run to completion. It will run for quite a while on your system since you have so many processes running. If you're getting an "exception", what is it?
My System SpecsSystem Spec
20 Mar 2013   #16
Phaerius

Windows 7 home premium 64 bit
 
 

I don't run avg actively, I know not to run multiples, I was using it for scans a month or so ago to cover a few programs. Same with AdAware, I don't believe I have any AdAware real time security running, so removing those shouldn't be an issue.

"Unhandled exception has occurred in your application. If you click continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.

Could not complete operation on some files and directories. See the Data property of the exception for more details."

Details: See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IO.IOException: Could not complete operation on some files and directories. See the Data property of the exception for more details.
at Microsoft.VisualBasic.FileIO.FileSystem.FxCopyOrMoveDirectory(CopyOrMove operation, String sourceDirectoryPath, String targetDirectoryPath, Boolean overwrite)
at Microsoft.VisualBasic.FileIO.FileSystem.CopyOrMoveDirectory(CopyOrMove operation, String sourceDirectoryName, String destinationDirectoryName, Boolean overwrite, UIOptionInternal showUI, UICancelOption onUserCancel)
at Microsoft.VisualBasic.MyServices.FileSystemProxy.CopyDirectory(String sourceDirectoryName, String destinationDirectoryName, Boolean overwrite)
at SF_Diagnostic_Tool.Form1.Button1_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5466 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
SF Diagnostic Tool
Assembly Version: 5.0.0.6
Win32 Version: 5.0.0.6
CodeBase: file:///C:/Users/Phaerius/Desktop/SF_Diagnostic_Tool.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5468 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

As per my first post. The progress bar doesn't move despite leaving it for an hour or so.
My System SpecsSystem Spec
20 Mar 2013   #17
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Have You replaced the PSU in the machine or does it have the original HP PSU? The recommended wattage for your card is 450W, I believe. I seriously doubt HP put that size PSU in your computer. Can you tell us the specs on it?
My System SpecsSystem Spec
20 Mar 2013   #18
carwiz

Windows 7 Pro-x64
 
 

Good point Steve.

AVG and Adaware had services running unless you didn't provide the most recent MSINFO. I'm done here until we get valid data to work with.
My System SpecsSystem Spec
20 Mar 2013   #19
Phaerius

Windows 7 home premium 64 bit
 
 

That was the msinfo I just saved, also, I do have a have a higher wattage psu. I'm currently running a 600w, let me see if I can find the model. It's a thermaltake I switched to a few months back, current lockup issues were occurring with previous psu as well. Still looking for exact model info.

Pretty sure it's this. http://www.thermaltakeusa.com/produc...?id=C_00002032

Will leave the diagnostic tool running as long as I can, but the last time I tried that it didn't do much of anything.
My System SpecsSystem Spec
20 Mar 2013   #20
Phaerius

Windows 7 home premium 64 bit
 
 

Ran the SF diagnostic tool for five hours, no change past 25-30% when the unhandled exception hits. Didn't put together anything other than the dump files.
My System SpecsSystem Spec
Reply

 BSOD 7f, frequent during loads, not ram




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD right after windows loads
Hello guys, I got another computer getting BSOD, Windows loads, when it gets into the desktop, the screen gets a load of horizontal lines filled with mixed colors of pixels and then I get a BSOD, ks.sys BSOD. I got into safe mode with network and got the zip file using SF Diagnostic Tool, I...
BSOD Help and Support
Frequent BSOD playing SimCity / Frequent applications crashing
Hello, This has all started since installing EA's Origin in order to play SimCity and Battlefield 3, the later crashes with a BSOD Stop 0x0000001 within about 1 minute of starting, SimCity will give me up to an hour before BSOD'ing. It's 50:50 whether it's a BSOD or a 'SimCity has stopped...
BSOD Help and Support
Loads of BSOD's
Morning guys, since i bought my pc some months ago I've been experiencing lots of problems and even a vga and a memory stick stopped to work. I sent them to the rma but the problem persists and I was wondering if someone could help me here. I'll be sending some dumps i've collected so far. Thanks...
BSOD Help and Support
Frequent BSOD's under idle loads, with no obvious trigger
Recently I've been experiencing BSOD crashes on my machine - up to twice a day at worst - and I can't seem to trace down the cause, so any help would be greatly appreciated! OS Specs/Computer history (Hardware under System Specs in sidebar): Home-built desktop (Built Jan. 2011) Windows 7...
BSOD Help and Support
BSOD soon after Windows 7 loads up
Hi. This is my first post and I'm a bit of a PC novice... My PC, an HP DM4 64bit purchased directly from HP, approx 6 months old, has just started giving me problems When I power up, Windows starts to load, I get to the Windows password screen, enter my password, and Windows continues (very...
BSOD Help and Support
Flash drive driver loads-unloads-loads....
I bought a FlashVoyager 16GBGT in September for use with my XP pro machine and all was fine. I have now upgraded to Windows 7 Pro 32-bit and I can no longer use the flash drive. When I plug it into a port the Autoplay window pops up for a few seconds and then disappears, then reappears, then... and...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App