Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Repeated BSOD on boot 0x1A

16 Mar 2013   #1
Jester3k

Windows 7 64 bit
 
 
Repeated BSOD on boot 0x1A

Installed memory upgrade in my Toshiba Qosmio x505 Q887 laptop. Upgraded with compatible memory from 4g to 8g ram.

Experiencing repeated BSOD on boot now.

Downloaded SF Diagnostic Tool as instructed

WhoCrashed report included:

Attachment 259652







My System SpecsSystem Spec
.
16 Mar 2013   #2
x BlueRobot

 

Please upload the required files, using these instructions:
My System SpecsSystem Spec
16 Mar 2013   #3
Jester3k

Windows 7 64 bit
 
 

Edited message per instructions.
My System SpecsSystem Spec
.

17 Mar 2013   #4
x BlueRobot

 

Code:
BugCheck 1A, {41790, fffffa80032110e0, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )
Code:
Usual causes:  Device driver, memory, kernel
-->Scan for any missing, modified or corrupted protected Windows files with:-->Memory:Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

-->Scan for any malware:-->Remove:

Code:
Start Menu\Programs\TOSHIBA\CD&DVD Applications
Start Menu\Programs\TOSHIBA
Start Menu\Programs\TOSHIBA\Utilities
Start Menu\Programs\TOSHIBA\TOSHIBA Media Controller
This is motherboard bloatware, which can slow down and corrupt your system.

-->Remove:

Code:
Start Menu\Programs\Driver Fusion
This driver programs can cause problems and are not needed. Please update drivers using the appropriate manufacturer's website.

-->Reduce the number of programs at startup, to avoid any driver or program conflicts:
My System SpecsSystem Spec
Reply

 Repeated BSOD on boot 0x1A




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 repeated crash and re-boot
Hi I have Windows 7 Home Premium on a Sony laptop which was running OK for some time. I recently attempted to install Ubuntu as a dual boot but it failed to install correctly. I cannot open the .dmp file but captured some info from the screen below. problem signature: Problem Event...
General Discussion
Repeated boot failures
About two weeks ago I started having boot problems. I cannot relate it to any particular event like a new program or update. My system information is listed below using Piriform Speccy - this is a home built system and has functioned fine for about 18 months. I have had it set up to schedule shut...
General Discussion
BSOD 0x4E and 0x1A
Hello again (again) Guys, ok after a month with no BSODs my system started to give me the same BSODs I had a month ago. I made a Topic a month ago... here is the link (http://www.sevenforums.com/crashes-debugging/187588-bosd-0x4e-pfn_list_cortupt-mainly-while-booting.html). The problem was...
BSOD Help and Support
BSOD 0x1a memory_management.
Ok so I learned to debug dumps myself. I waited for this to finally happen, a memory management bsod. I had tested my ram several times prior to learning properly, and it was always fine. Its being caused by firefox while running a flash video, or stream. I don't know what to do about it,...
BSOD Help and Support
Random BSOD 0x1a
Before I'm told to check my ram, BAM. http://i.imgur.com/gRYal.jpg Now thats taken care of, I'm not sure what's causing this. Zipped up the files all nice and snug. So please help me out.
BSOD Help and Support
Win 7 Pro 64 bit BSOD 0x1a
I've been having this problem since I changed to a 64bit sys and upgraded to 8gb RAM. Seems like when Im messing (copy & paste to diff. folder) with video files or watching video files this BSOD keeps happening. Not every time but more than I can stand.The error code is always the same : "0x1a" . I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App