Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD, stop codes: F4,7A (Almost Constant)

22 Mar 2013   #11
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

There is no bad programs installed. As the Seatools found, it might be the problem of the HDD only. Hopefully Seatools fixed it.

If you get more BSODs, let us know


My System SpecsSystem Spec
.
30 Mar 2013   #12
bancosrs

Windows 7 x64
 
 

Alright, once again I appreciate all the help! Can't say it enough

It has been a week and I haven't moved all my files over yet but so far everything has been working fine. I do have some freezes here and there that I have never had before but I have NOT gotten the BSOD since.

I am going to go ahead and say this is solved by SEAGATE tools for DOS from boot to CD repair.
My System SpecsSystem Spec
30 Mar 2013   #13
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

OK mate
For any further issue, let us know.
My System SpecsSystem Spec
.

07 Jun 2013   #14
bancosrs

Windows 7 x64
 
 

Hello. I wasnt sure if I should make a new thread but I am getting the BSOD again. My last BSOD in this thread was due to my HDD. I ended up purchasing a new one. It has worked since the last post of this thread until now.

I am getting a 1A error code. It just happened and when I restarted and went to try and do windows update/event viewer I got it again.

This is my dump file. Attachment 271607
My System SpecsSystem Spec
07 Jun 2013   #15
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Test your RAM

RAM - Test with Memtest86+

take a look at part 3 if errors come up
My System SpecsSystem Spec
07 Jun 2013   #16
bancosrs

Windows 7 x64
 
 

Sighhh... First had to replace the HDD. NOW I have to replace one of the sticks.. I followed the tutorial and confirmed that it was my 4gb RAM stick. My 2GB one works.

I appreciate the help
My System SpecsSystem Spec
07 Jun 2013   #17
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

If its a dual channel kit . Replace both sticks . If its still under warranty open up an RMA to get the kit replaced . If its out of warranty then buy a new dual channel memory kit .

With kits you can't replace one memory stick you would have to purchase a new kit .
My System SpecsSystem Spec
07 Jun 2013   #18
bancosrs

Windows 7 x64
 
 

Is it alright to just run my laptop with one stick in then? I think that is what I will do until I find it necessary to purchase more RAM.
My System SpecsSystem Spec
07 Jun 2013   #19
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

It will work . But its better to run dual channel memory in pairs
My System SpecsSystem Spec
07 Jun 2013   #20
bancosrs

Windows 7 x64
 
 

Also, I am not sure how to exactly determine if I have dual channel or not. My MSINFO32 gives me a model of K53SV.

Googling that it brings me to these specification: DDR3 1333 MHz SDRAM, 2 x SO-DIMM socket for expansion up to 8 G SDRAM

Also, downloading CPU-Z and going to memory shows Channel# Single. However, that is with only one stick of RAM.
Installing the broken stick (4gb) back into my laptop and checking cpu-z again gives me Channel# Dual and 6gb total (what I originally had).
My System SpecsSystem Spec
Reply

 BSOD, stop codes: F4,7A (Almost Constant)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Constant BSOD, codes 0x0000001e, 0x0000000a
Hey guys, i'm new to this site and with the constant BSOD'S i've been having, i've finally joined the forums after hrs of reading different forums with no actual resolves..hopefully i can get some help from you guys to solve this issue. first i'd like to give a little history of how this all...
BSOD Help and Support
Constant BSOD's, all different error codes. 0x0000000a
I've had this custom PC for a little while, since the Christmas before last, and for a while it had been working fine. But around January of this year I started getting BSOD's all over the place, most of the time them all with different error codes. The only thing that's the same about them is they...
BSOD Help and Support
Constant BSOD over the past two week, varying error codes
Hello, About every other boot, I get a BSOD for one reason or another. Sometimes, no BSOD will show up, but the comp. will loop through the welcome screen, meaning the welcome screen will show but will not displays user accounts and then it will turn black and back to the welcome screen again. ...
BSOD Help and Support
Fresh Build - Constant BSOD - Multiple Codes - 3b, 50, a
Hi All, After my last rig decided to stop working I decided to build a new one and start fresh. Would randomly turn off (not BSOD) and take multiple tries to turn back on My new rig is based off a PCGamer build, so I know components should work well together: OS: Windows 7 Ultimate x64...
BSOD Help and Support
Constant BSOD HP Pavilion Media Center m8000 Various Error Codes Win 7
HP Pavilion Media Center m8000 Windows 7 Home Premium 64 Bit Originally Vista Home Premium (Architecture Unknown - I Assume 64 Bit Also) Full Retail Upgrade Version Hardware I Was Told is 3-4 Years Old OS Installed 2 Weeks Ago I'm hoping someone can help me with this issue. This PC was...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App