Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSoD After installing New RAM MEMORY_MANAGEMENT

27 Apr 2013   #51
roy2k

Windows 7 Home Premium 64bit
 
 

Ok, I:
  1. Ran the Systems Readiness Tool
  2. Ran Windows Updates and installed the latest "important" updates. ( I didn't install the optional ones)
  3. I UNinstalled "LogMeIn" program which is responsible for the LMIRfsDriver.sys & lmimirr.sys files.
  4. I haven't messed with the livecam or P17 yet. I don't know how to update those. They are from my webcam.
Attached are the latest minidumps.

Thank you.


My System SpecsSystem Spec
.
27 Apr 2013   #52
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

P17.sys is your Sound Card driver

Name of DriverDownload
P17.sysdownload

What is the model of your webcam and I will get you the drivers for them .
My System SpecsSystem Spec
28 Apr 2013   #53
Northernsoul55

Microsoft Community Contributor Award Recipient

Windows 7 Professional 64bit
 
 

Hi,

From your latest crash logs:

Code:
 
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff88006428950, 0, 0}
Unable to load image k57nd60a.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for k57nd60a.sys
*** ERROR: Module load completed but symbols could not be loaded for k57nd60a.sys
Probably caused by : NETIO.SYS ( NETIO!NetioAllocateAndReferenceNetBufferListNetBufferMdlAndData+21 )
NETIO.sys refers to a Windows networking driver.
Since it's a Windows driver it's likely protected by the System File Checker and, consequently, it's not likely to be the actual cause. But, since it is a networking driver, this points us towards networking related 3rd party programs.

Code:
 
0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
MEMORY_MANAGEMENT (1a)
STOP 0x0000001A: MEMORY_MANAGEMENT
Usual causes: Device driver, memory, kernel

Update these drivers:
Faulting driver: k57nd60a.sys
Refers to: Broadcom NetLink Gigabit Ethernet NDIS6.x Unified Driver
Update Website: Ethernet NIC Driver Downloads | Broadcom

Faulting Driver: NisDrvWFP.sys
Refers to: Microsoft Network Inspection System Driver
Windows Update should update this driver or it is corrupt.

I suggest running SFC again, Select option two. If any problems are found,
run the scan 3 times and immediately reboot the computer after each scan.

Hmm these two drivers still show in your logs :

LMIRfsDriver.sys
lmimirr.sys

If you have uninstalled the Logmein program, then either delete/disable manually
or use Ccleaner to remove leftover drivers

To manually delete/disable the drivers, Navigate to:
1. C:\windows\system32\drivers
2. Search in the drivers folder for your drivers.
3. Rename LMIRfsDriver.sys to LMIRfsDriver.sys.old
4. Rename lmimirr.sys to lmimirr.sys.old
5. Reboot computer, see if any issues arise?
6. If you experience issues, rename drivers back to original file name and reboot.
7. If no issues arise, navigate back to the drivers folder, right click
and delete the two drivers from your system. Reboot.

Please remover SuperAntispyware for the time being as it has been known to cause issues.

What is the RAM situation? Any progress?

Scan your system for any possible virus/malware infection as NETIO related issues
can also be Malware Apps.

http://www.sevenforums.com/tutorials/166445-windows-defender-offline.html
http://support.kaspersky.com/5350?vs=s88446#s88446

Once you complete the above and update the drivers Vista is helping you with,
try running the Intel Update utility again and update igdkmd64.sys driver if you can?

Post back any observations / results
cheers
Dave
My System SpecsSystem Spec
.

28 Apr 2013   #54
roy2k

Windows 7 Home Premium 64bit
 
 

@ Vista King, thank you for the P17.

@ Dave, At first, I thought the reason you saw the LogMeIn drivers was because those dump files were created before I uninstalled LogMeIn. But I looked at the system32 folder and saw they indeed are still in there. I renamed them to .old as you recommended.

Why is it every time I crash, it seems I get a new or different driver at fault that was not there before?

I tried to run the Intel Update Utility again but it still fails. I tried enabling to prompt ActiveX from my internet setting but it still won't run. (not sure if I did all that right).

I am still running the Corsair 2Gb x 3 sticks RAM.

As mentioned in post #51, item #2, I already ran Windows Update. How could Faulting Driver: NisDrvWFP.sys be an issue now?

I looked all over that Broadcom link you sent me but I could not find any Broadcom NetLink Gigabit Ethernet NDIS6.x Unified Driver.
My System SpecsSystem Spec
28 Apr 2013   #55
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Roy2k

Click here DDS

Click on Download Now button

Double click the dds icon to run the tool.

Place a check next to attact.txt and click Start . When done, DDS will open two logs
DDS.txt
Attach.txt

Save two logs onto your desktop and upload them with your reply

Note   Note
Don't zip the attach.txt file
My System SpecsSystem Spec
28 Apr 2013   #56
roy2k

Windows 7 Home Premium 64bit
 
 

Attached. Thank you doctor.
My System SpecsSystem Spec
28 Apr 2013   #57
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Remove McAfee and norton
My System SpecsSystem Spec
29 Apr 2013   #58
Northernsoul55

Microsoft Community Contributor Award Recipient

Windows 7 Professional 64bit
 
 

Install the 4 GB RAM that came with the computer, you do not experience any BSOD's with that RAM.

By running the Corsair RAM that you know causes the BSOD's, your creating further Issues/BSOD'S.
My System SpecsSystem Spec
30 Apr 2013   #59
roy2k

Windows 7 Home Premium 64bit
 
 

I uninstalled Norton. Still got another BS. Can you help me to fix these faulty drivers?

Thanks.
My System SpecsSystem Spec
30 Apr 2013   #60
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

roy2k

Try this driver http://downloadcenter.intel.com/conf...ws+7+(64-bit)*

Click here to download the driver
My System SpecsSystem Spec
Reply

 BSoD After installing New RAM MEMORY_MANAGEMENT




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Bsod- memory_management
Hi I have built a new pc with windows 7 64 bit and the following specs: Intel CORE I7 920 @ 2.67 GHZ ASUS MOTHER BOARD P6TD DELUX ATI RODEON HD 5850 GRAPICHS CARD 700W PSU 12GB DDR3 RAM 1 X 1TB HD 1 X 2 TB HD
BSOD Help and Support
BSOD memory_management
Hi,my laptop been crashing and restarting for the past two weeks . My windows 7 is . x64 bit . home premium . OEM . age of system approx.2years Any help is deeply appreciated
BSOD Help and Support
BSODs after installing X64. X86 was working fine. (MEMORY_MANAGEMENT)
After upgrading my install of Windows 7 32bit to 64bit, I began to encounter random bluescreens of the MEMORY_MANAGEMENT variety. Here's the .dmp of today's BSOD. I once did phone technical support for Dell's Precision Workstation department for a year. I'm willing to take the hit in pride...
BSOD Help and Support
Bsod memory_management
Hey I have recently been getting bsod, It takes about 3 or 4 attempts to turn my computer on for it to be working. It will just randomly blue screen, sometimes before I even log on. Here's a screenshot of the blue screen: http://i55.tinypic.com/9auty8.jpg Hope you can help me :)
BSOD Help and Support
Bsod memory_management
I am using Windows 7 Home Premium. After the installation I began to have BSODS with the problem being "memory_management". I ran the Windows 7 memory diagnostic. There were no problems indicated. I then ran the “sfc /scannow” and there were corrupt files that could not be repaired. So I...
BSOD Help and Support
Memory_management bsod
I built a new computer about a month and a half ago, and installed the Release Candidate of Windows 7 (legitimate copy with a legitimate CD key from Microsoft). For the first month or so I had zero problems, lately I have been getting BSOD's rather often, sometimes more than once a day. I've looked...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 20:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App