Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSoD After installing New RAM MEMORY_MANAGEMENT

06 May 2013   #71
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

How to get the log from a Chkdsk

Check Disk (chkdsk) - Read Event Viewer Log

I am getting video card errors and your sound card

BSOD on 5/3/2103 at 11:55 PM

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41790, fffffa800046b8d0, ffff, 0}

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::CloseLocalAllocation+a7 )

Followup: MachineOwner
---------

Code:
kd> lmvm p17
start             end                 module name
fffff880`05626000 fffff880`057ab000   P17      T (no symbols)           
    Loaded symbol image file: P17.sys
    Image path: \SystemRoot\system32\drivers\P17.sys
    Image name: P17.sys
    Timestamp:        Thu Oct 15 23:44:53 2009 (4AD81665)
    CheckSum:         0013FE04
    ImageSize:        00185000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

P17.sys= Creative SB Audigy LS


Note   Note
Didn't you run a memory test for your video card and it failed ? Might want to get a video card replacement



My System SpecsSystem Spec
.
06 May 2013   #72
roy2k

Windows 7 Home Premium 64bit
 
 

Chkdsk Results:

Checking file system on C:
The type of the file system is NTFS.
Volume label is OS.

A disk check has been scheduled.
Windows will now check the disk.

CHKDSK is verifying files (stage 1 of 5)...
946176 file records processed. File verification completed.
4102 large file records processed. 0 bad file records processed. 0 EA records processed. 44 reparse records processed. CHKDSK is verifying indexes (stage 2 of 5)...
1118578 index entries processed. Index verification completed.
0 unindexed files scanned. 0 unindexed files recovered. CHKDSK is verifying security descriptors (stage 3 of 5)...
946176 file SDs/SIDs processed. Cleaning up 1911 unused index entries from index $SII of file 0x9.
Cleaning up 1911 unused index entries from index $SDH of file 0x9.
Cleaning up 1911 unused security descriptors.
CHKDSK is compacting the security descriptor stream
86202 data files processed. CHKDSK is verifying Usn Journal...
34287352 USN bytes processed. Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
946160 files processed. File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
152870336 free clusters processed. Free space verification is complete.
CHKDSK discovered free space marked as allocated in the
master file table (MFT) bitmap.
Correcting errors in the Volume Bitmap.
Windows has made corrections to the file system.

966359039 KB total disk space.
353612204 KB in 327871 files.
188968 KB in 86205 indexes.
0 KB in bad sectors.
1076523 KB in use by the system.
65536 KB occupied by the log file.
611481344 KB available on disk.

4096 bytes in each allocation unit.
241589759 total allocation units on disk.
152870336 allocation units available on disk.

Internal Info:
00 70 0e 00 80 51 06 00 03 11 09 00 00 00 00 00 .p...Q..........
90 e0 01 00 2c 00 00 00 00 00 00 00 00 00 00 00 ....,...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

Windows has finished checking your disk.
Please wait while your computer restarts.

I am currently updating my SB Audigy LS drivers using the Creative Software AutoUpdate Tool.
My System SpecsSystem Spec
06 May 2013   #73
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Not seeing issues . No bad sectors .
My System SpecsSystem Spec
.

12 May 2013   #74
roy2k

Windows 7 Home Premium 64bit
 
 

Ok, I finally decided to remove the card from slot #3 (physical slot #1) So now I have 4Gb RAM in two slots (Slot 1 & 2, physical slots 2 & 4). Here is a photo of the RAM and the minidumps. We never fixed the bad driver igdkmd64.sys.

So I'll wait now and see if it crashes on 2 sticks of RAM or not.
My System SpecsSystem Spec
12 May 2013   #75
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

The image of the RAM stick in the image goes with a 3 memory kit (3x2GB) to equal 6GB . That's for triple channel motherboards . Your motherboard is a dual channel motherboard . Even though you have 4 memory slots your memory won't work to what the memory is meant for .

To replace memory kit modules you replace the entire kit if one memory stick goes bad .
My System SpecsSystem Spec
13 May 2013   #76
roy2k

Windows 7 Home Premium 64bit
 
 

Wow! So this could be my problem!? So are you saying that if get a fourth RAM stick it won't fix the problem and that I should get 3 or 4 individual sticks of 2Gb? Do they have to be from the same manufacturer?

Thanks.
My System SpecsSystem Spec
13 May 2013   #77
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

You would need a dual channel memory kit . If you want to fill up the entire memory slots you would need two dual channel memory kits


:Added:

8GB (2x4GB) Dual Kit memory

http://www.newegg.com/Product/Produc...82E16820145315

Note   Note
The MAXIMUM your Motherboard could go up to is 8GB . Either with one kit or two


Motherboard Memory Speeds It could support are :

DDR3 PC3-10600 ( DDR3 1333 )

DDR3 PC3-12800 ( DDR3 1600 )
My System SpecsSystem Spec
16 May 2013   #78
roy2k

Windows 7 Home Premium 64bit
 
 

Well, it's been a few days since I removed one stick of RAM but I finally crashed again. I guess like you said the real problem here is that I am running RAM design for a triple channel board when I have a dual channel.

Please look at page one of the specs for this computer. It says memory configuration supported is 4, 6, or 8Gb.
ftp://ftp.dell.com/Manuals/all-produ...uide_en-us.pdf

I would like to start off with 6Gb (3 x 2Gb) for now. If I decide later, can I upgrade by adding another 2Gb stick or do I have to start all over and get 4 x 2Gb of the same brand or a kit?

Thank you.
My System SpecsSystem Spec
16 May 2013   #79
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

For dual channel you need a memory kit that comes in pairs .

For example 2x4GB is 2 sticks of memory where each stick has 4GB to make it 8GB . If you want to fill the four DIMM Slots you would need two dual channel kits same manufacture and speed .
My System SpecsSystem Spec
23 May 2013   #80
roy2k

Windows 7 Home Premium 64bit
 
 

Did you see in the manual where it says I can run 6Gb RAM?

So, it's been over a week now since my last blue screen. I'm still running the two sticks of 2Gb Corsair RAM.

I just talked to the guy at Fry's Electronics on the phone. I was gonna see if I could exchange the Corsair kit because they sold me a triple channel kit for my dual channel board. He insisted that I can use the triple channel sticks on a dual channel board with no problem. It just might not be as fast as if I were using it with a triple channel board.

I don't know what to do now. He suggested one of the sticks or slots might be bad. But everything works fine with all slots filled with 1Gb RAM. And I highly doubt there is anything wrong with the Corsair RAM.

He said I could do a memtest on each Stick one at a time. Seems like a pain in the @ss.

Whoa! Check this out: I just ran Speccy and it shows that my two sticks of RAM are DUAL channel. Nevermind. I guess it means my computer is dual channel as you said.

RAM
Memory slots
Total memory slots 4
Used memory slots 2
Free memory slots 2
Memory
Type DDR3
Size 4096 MBytes
Channels # Dual
DRAM Frequency 665.0 MHz
CAS# Latency (CL) 9 clocks
RAS# to CAS# Delay (tRCD) 9 clocks
RAS# Precharge (tRP) 9 clocks
Cycle Time (tRAS) 24 clocks
Command Rate (CR) 1T
Physical Memory
Memory Usage 72 %
Total Physical 3.80 GB
Available Physical 1.06 GB
Total Virtual 7.61 GB
Available Virtual 3.66 GB
SPD
Number Of SPD Modules 2
Slot #1
Type DDR3
Size 2048 MBytes
Manufacturer Corsair
Max Bandwidth PC3-10700H (667 MHz)
Part Number CMX6GX3M3A1333C9
SPD Ext. EPP
JEDEC #4
JEDEC #3
JEDEC #2
JEDEC #1
Slot #2
Type DDR3
Size 2048 MBytes
Manufacturer Corsair
Max Bandwidth PC3-10700H (667 MHz)
Part Number CMX6GX3M3A1333C9
SPD Ext. EPP
My System SpecsSystem Spec
Reply

 BSoD After installing New RAM MEMORY_MANAGEMENT




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Bsod- memory_management
Hi I have built a new pc with windows 7 64 bit and the following specs: Intel CORE I7 920 @ 2.67 GHZ ASUS MOTHER BOARD P6TD DELUX ATI RODEON HD 5850 GRAPICHS CARD 700W PSU 12GB DDR3 RAM 1 X 1TB HD 1 X 2 TB HD
BSOD Help and Support
BSOD memory_management
Hi,my laptop been crashing and restarting for the past two weeks . My windows 7 is . x64 bit . home premium . OEM . age of system approx.2years Any help is deeply appreciated
BSOD Help and Support
BSODs after installing X64. X86 was working fine. (MEMORY_MANAGEMENT)
After upgrading my install of Windows 7 32bit to 64bit, I began to encounter random bluescreens of the MEMORY_MANAGEMENT variety. Here's the .dmp of today's BSOD. I once did phone technical support for Dell's Precision Workstation department for a year. I'm willing to take the hit in pride...
BSOD Help and Support
Bsod memory_management
Hey I have recently been getting bsod, It takes about 3 or 4 attempts to turn my computer on for it to be working. It will just randomly blue screen, sometimes before I even log on. Here's a screenshot of the blue screen: http://i55.tinypic.com/9auty8.jpg Hope you can help me :)
BSOD Help and Support
Bsod memory_management
I am using Windows 7 Home Premium. After the installation I began to have BSODS with the problem being "memory_management". I ran the Windows 7 memory diagnostic. There were no problems indicated. I then ran the “sfc /scannow” and there were corrupt files that could not be repaired. So I...
BSOD Help and Support
Memory_management bsod
I built a new computer about a month and a half ago, and installed the Release Candidate of Windows 7 (legitimate copy with a legitimate CD key from Microsoft). For the first month or so I had zero problems, lately I have been getting BSOD's rather often, sometimes more than once a day. I've looked...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 14:59.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App