Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Three BSODs within the past few days

04 Jun 2013   #31
icefall5

Windows 7 Professional 64-bit, SP1
 
 

I did a clean installation back in... January, I think? The problems started in mid-March. As part of my troubleshooting with Galaxy, I did swap out my GPU with my older Radeon HD 5450 (after hardcore uninstalling all of the NVidia drivers first), but it still blue screened.

I never marked it explicitly here (for some reason), but I believe the dump from this earlier post happened while the old card was in.

EDIT: Took the screenshot, forgot to post it. Also attached a dump that just happened.

DOUBLE EDIT: Another dump posted....


My System SpecsSystem Spec
.
05 Jun 2013   #32
gregrocker

 

Compare the reinstall you did to the steps recommended to get and keep a perfect Clean Reinstall - Factory OEM Windows 7 which work the same for retail.

If you'll stick with the tools and methods given then you'll get and keep a perfect install for as long as you do.

Other Troubleshooting Steps for Windows 7 to go over your install and hardware.
My System SpecsSystem Spec
05 Jun 2013   #33
x BlueRobot

 

The 5V and the 12V rails don't look normal to me, it could either be the program not reporting the voltages right or a bad PSU. Does anyone know how the good the reputation of Cooler Master is?

The two drivers are still being blamed:

Code:
0: kd> lmvm nvlddmkm
start             end                 module name
fffff880`05045000 fffff880`05b26000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Sun May 12 20:09:45 2013 (518FE8F9)
    CheckSum:         00AB6DED
    ImageSize:        00AE1000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Code:
0: kd> lmvm netr28x
start             end                 module name
fffff880`05b26000 fffff880`05bee000   netr28x  T (no symbols)           
    Loaded symbol image file: netr28x.sys
    Image path: netr28x.sys
    Image name: netr28x.sys
    Timestamp:        Mon Nov 09 04:07:21 2009 (4AF79579)
    CheckSum:         000CFDB3
    ImageSize:        000C8000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
The Microsoft Network Inspection System Driver seems to be being blamed in the raw stack text:

Code:
0: kd> lmvm NisDrvWFP
start             end                 module name
fffff880`0bcb0000 fffff880`0bcd1000   NisDrvWFP T (no symbols)           
    Loaded symbol image file: NisDrvWFP.sys
    Image path: NisDrvWFP.sys
    Image name: NisDrvWFP.sys
    Timestamp:        Wed Oct 31 22:43:30 2012 (5091A992)
    CheckSum:         00022C97
    ImageSize:        00021000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
.

05 Jun 2013   #34
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
The 5V and the 12V rails don't look normal to me, it could either be the program not reporting the voltages right or a bad PSU. Does anyone know how the good the reputation of Cooler Master is?

The two drivers are still being blamed:

Code:
0: kd> lmvm nvlddmkm
start             end                 module name
fffff880`05045000 fffff880`05b26000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Sun May 12 20:09:45 2013 (518FE8F9)
    CheckSum:         00AB6DED
    ImageSize:        00AE1000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Code:
0: kd> lmvm netr28x
start             end                 module name
fffff880`05b26000 fffff880`05bee000   netr28x  T (no symbols)           
    Loaded symbol image file: netr28x.sys
    Image path: netr28x.sys
    Image name: netr28x.sys
    Timestamp:        Mon Nov 09 04:07:21 2009 (4AF79579)
    CheckSum:         000CFDB3
    ImageSize:        000C8000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
The Microsoft Network Inspection System Driver seems to be being blamed in the raw stack text:

Code:
0: kd> lmvm NisDrvWFP
start             end                 module name
fffff880`0bcb0000 fffff880`0bcd1000   NisDrvWFP T (no symbols)           
    Loaded symbol image file: NisDrvWFP.sys
    Image path: NisDrvWFP.sys
    Image name: NisDrvWFP.sys
    Timestamp:        Wed Oct 31 22:43:30 2012 (5091A992)
    CheckSum:         00022C97
    ImageSize:        00021000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Hum my own experience with Coolermasters have not been too bad in fact I would buy them if I were not an out and out Corsair person.
I am curious to know what volts are being reported by the BIOS and as well why not get get a good multimeter and test them using the tutorial PSU - Jump Start bbut care must be taken anywhere near the PSU casing itself!!
My System SpecsSystem Spec
05 Jun 2013   #35
x BlueRobot

 

Thanks for the information, and checking the voltages will be much more reliable, as well as, a multimeter to measure the voltages.
My System SpecsSystem Spec
05 Jun 2013   #36
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Thanks for the information, and checking the voltages will be much more reliable, as well as, a multimeter to measure the voltages.
Yeah Blue but remember that correct volts don't necessarily mean correct current unfortunately.

Think of it like a car that has 12-13v showing on the meter but has no current capacity for turning th engine over
My System SpecsSystem Spec
05 Jun 2013   #37
x BlueRobot

 

Thanks again
My System SpecsSystem Spec
07 Jun 2013   #38
icefall5

Windows 7 Professional 64-bit, SP1
 
 

Completely forgot--I began having the issue before I bought the PSU. I bought this new PSU in the hopes that it was a wattage problem (my old PSU was only 300W), but the problem has persisted.

I'm throwing in the towel and doing a clean install tonight. I'll update you guys after it's done, then we'll really know if it's a hardware or a software issue.
My System SpecsSystem Spec
07 Jun 2013   #39
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

ON thing you can do Icefall is get something like this Power Meter – Measure Energy Consumption and Cost | Steplight if you want to be able to work out what the machine/s are pulling in watts.

Just because the PSU is say a 500 watt rating dos not mean it is pulling that all the time it depends on the usage of the machine at the time so at high end gaming use for example the PSU might have to belt out 450 watts but at idle it can fall back to 200 watts.
My System SpecsSystem Spec
09 Jun 2013   #40
icefall5

Windows 7 Professional 64-bit, SP1
 
 

*sigh* Clean install did not fix the problem. Here's today's dump. (My WoW client crashed with an ACCESS_VIOLATION error prior to this BSoD, if that helps.)
My System SpecsSystem Spec
Reply

 Three BSODs within the past few days




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSODs in the past 4 days.. Clueless Lots of errors . 1e, 4e, 7e
Hello Sevenforums, lately wife's rig has been suffering from random BSODs, we can be having a 2 hours session of cod and when she is on desktop it crashes, or it would happen mid game.. it's just random. Also When i get those BSODs PC goes into a cold boot loop, it's like when i press the...
BSOD Help and Support
A few BSODs in the past couple days 0x00000d5
Hi there! I figured I would finally make an account and ask someone who know what they're doing rather than try to fix it myself, because that never really helps :( The BSODs started only a few days ago and the first one I didn't pay attention too really, now they're starting to worry me. One of...
BSOD Help and Support
3 random bsods the past few days
Just browsing the internet and listening to music each time. Windows 7 Home Premium x64 OEM Only hardware changes are installed a new sound card a few weeks ago (Creative Sound Blaster X-Fi Titanium HD), and just got a new keyboard (Ducky Shining). Attached is a zip containing a...
BSOD Help and Support
Several BSODs in past few days
I believe the Blue Screens and hanging applications began after installing the latest Windows updates. The first thing that went wrong was the AVG anti-virus update got hung up. I then ran a manual update which seems to have fixed that problem. Then the Blue Screens started at no particular time or...
BSOD Help and Support
Multiple BSODs for the past 2 days
Hi, sorry for posting again. This is just a follow-up from my previous post: http://www.sevenforums.com/crashes-debugging/102785-multiple-assorted-bsods-2-days.html I ran memtest86+ (standard test) on my 2x2GB Team Elite DDR3 sticks. Testing each stick for 5 passes showed no errors. Later I'll...
BSOD Help and Support
Many BSODs over the past couple days
I have recently installed Firefox, drivers for a n52 speedpad and the audio drivers for my system. I am getting random BSODs and it seems like any time I use my front USB ports also. I am assuming that it is my audio drivers that are causing the problems, but I have also heard that Firefox is not...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:05.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App