Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSODs with netio.sys always being pointed to

28 Mar 2013   #1
sl1322

Windows 7 Professional 64bit
 
 
Random BSODs with netio.sys always being pointed to

Okay so, I've been trying to fix issues with my computer for a good while now. Used to be where it'd crash almost every time I tried to do anything. Was able to trace it to a power supply issue. But a couple weeks later I started getting BSODs again. They're random and far less frequent (maybe once a day now). I've tested my ram by using Memtest, by using one stick at a time, changing the configuration, and even testing them in another person's computer and they always worked fine. My temps are usually less then 70C. I've tried updating drivers, but I'm not sure if there were any that I missed. As the title suggests, the BSODs seem random and I'm getting tired of just trying to deal with them. I just built this computer in Dec, 2012. My crash zip from the SF Diag Tools will be uploaded with this post. Any help with this issue would be greatly appreciated, thank you.


My System SpecsSystem Spec
.
28 Mar 2013   #2
x BlueRobot

 

Code:
BugCheck D1, {18, 2, 1, fffff8800143ff15}

Probably caused by : NETIO.SYS ( NETIO!StreamClassify+135 )
NETIO.SYS is a Windows I/O Network Subsystem driver, and there is most probably an issue with the network card drivers or a Internet security program which has it's own in-built firewall.

Scan for any missing, modified or corrupted protected Windows files with:Install and perform full scans with:
information   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:Check for any Windows Updates:

Start > Check for Updates > Install Important/Optional Updates > Reboot (if required)

Update:

Code:
2: kd> lmvm Rt64win7
start             end                 module name
fffff880`056ba000 fffff880`05781000   Rt64win7   (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
    Image name: Rt64win7.sys
    Timestamp:        Wed Dec 26 17:17:50 2012 (50DB313E)
    CheckSum:         000CDEEE
    ImageSize:        000C7000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
28 Mar 2013   #3
sl1322

Windows 7 Professional 64bit
 
 

Thank you for your response. I ran the sfc /scannow command a few times and it came back saying there was a file that it could not fix. So, I moved on to the Malwarebytes, ran it and it came back with an affected file. I let it restart my computer and remove the file. Ran Malwarebytes again and it came back with everything okay. Ran Security Essentials and came back with nothing aswell. Installed the optional updates on the Windows Update and ran the sfc command again. It came back saying that it found some corrupt files but was not able to fix them. I'll upload the CBS.log file with this post. I'll also let my computer run over night and see if it will crash again. Thank you again for your help.
My System SpecsSystem Spec
.

28 Mar 2013   #4
x BlueRobot

 

Good work with removing the malicious file, and some system files have been corrupted, so this in situation it would be advisable to try a Repair Install:Have you managed to update the network driver?
My System SpecsSystem Spec
28 Mar 2013   #5
sl1322

Windows 7 Professional 64bit
 
 

I've been looking into trying to update the network drivers but I can't seem to really find a "how to" or really which ones to try to update, Goggle really doesn't come up with anything helpful. I'll try the repair install and try the sfc command again.

--Update--

Okay so, I did the repair install, got all the updates from windows update, and ran the sfc command again. Sfc came back with no errors this time. Again, I'm going to let my computer run over night and see if it'll crash. You've been a huge help so far and I really appreciate it.
My System SpecsSystem Spec
29 Mar 2013   #6
x BlueRobot

 

That's good to know that the system files have been repaired, use the link provided previously:There are two options, you can use the automatic installation program provided or install the driver yourself manually, select the correct download link on the right depending upon your region (see screenshot):
Attachment 261612

Your welcome
My System SpecsSystem Spec
29 Mar 2013   #7
sl1322

Windows 7 Professional 64bit
 
 

Alright, I'll go ahead and grab that driver. I went ahead and let my computer run all night and it didn't crash. Actually hasn't crashed sense you started helping me, so I'll go ahead and mark the thread as solved. Thank you very much for all your help.
My System SpecsSystem Spec
29 Mar 2013   #8
x BlueRobot

 

Your very welcome, glad to help
My System SpecsSystem Spec
Reply

 Random BSODs with netio.sys always being pointed to




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSODs [+NETIO.sys, afd.sys, tcpip.sys]
Just after upgrading to Windows 8 x64 I started getting some BSODs while on Windows. I have already tried to update the LAN driver according to Asus's recommendation, but it didn't helped at all. EDIT: It usually happens when I'm doing whatever on Windows, but it's quite common if I'm using...
BSOD Help and Support
Random BSODs - fileinfo.sys, ntoskrnl.exe, netio.sys
Just put this cheap comp back together with a new MOBO and new RAM Updated BIOS to newest version I could find (Vista) *(could this be my problem?) Updated GPU to 8.17.13.142 Updated Windows with all important updates Ran Memtest 86 with no errors Also removed AVG using the remover tool...
BSOD Help and Support
Random BSODs, everytime caused by netio.sys
Good day In last few weeks I got about 10-12 BSODs, all pointing to NETIO.SYS. It happening only while playing World of Tanks but totally randomly. Sometimes I can play for few days without it but yesterday 3 in hour. I tested everything - PC was running for 10 hours in OCT + Inter Burn test...
BSOD Help and Support
Random BSODs related to NetIO.sys
Hello, I upgraded my system to Windows 7 Ultimate x64 a month or two ago from Windows XP Pro. Ever since the upgrade, I have been getting random BSODs that can occur when the system is completely idle (while I am at work) or while it is busy. It does not seem to have any sort of pattern. I...
BSOD Help and Support
BSODs:NETw5s64.sys,vsdatant.sys,netio.sys, what to do?
I'm having random BSOD's on my HP pavilion dv6 2140ef with Windows 7 64-bit. - There seems to be no particular pattern to the crashes...twice a day in the average, not tied to any particular activity. - I've tested the memory, using recommended tools and the memory is fine. - I've checked...
BSOD Help and Support
BSODs- tcpip.sys and netio.sys the most common culprits
Over the last week or so, I've had 22 BSODs, out of which most signified errors with tcpip.sys and netio.sys. I followed the advice of a user with a similar problem and set up a static IP through the IPv4 properties of my network adapter, which was a potential solution for fixing the netio.sys...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:43.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App