Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD since new motherboard installed

29 Mar 2013   #1
bonkers20

windows 7 ultimate 64bit
 
 
BSOD since new motherboard installed

BSOD since new motherboard installed I have my minidump file

thanks in advance


My System SpecsSystem Spec
.
29 Mar 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

All the failing moduls are Ntfs.sys, fltmgr.sys and fileinfo.sys. A common trio. May occur simply due to a bad HDD, or improperly placed/bad cables; as well as virus infections and even due to some file system monitoring mechanism of an ambitious antivirus.

Do some disc checks.
  1. Update your SSD's Firmware (Skip it, if you are not using a SSD)
  2. Re-seat the sata and power. Also you may try changing the SATA cables.
  3. Place the SATA port in another unused port on the motherboard (assuming a particular port is problematic).
  4. Run chkdsk /f/r, following the option two of the tutorial Disk Check
  5. Seatool for dos: SeaTools | Seagate download
    Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
Have you performed a clean reinstall after swapping the motherboard?

And upload your MSINFO32.nfo file.
  1. Click on the start button
  2. Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
  3. File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
  4. Give the time for processing, it will save a .nfo file on your desktop.
  5. Zip it, and upload it following the instruction.
My System SpecsSystem Spec
29 Mar 2013   #3
bonkers20

windows 7 ultimate 64bit
 
 

hi I have ran a check on ram and also hardrive both came back no errors and I did do clean install, I had same problem on old motherboard but thought it was because the cpu socket had bent pins but same problem on this board so problem has to be some where else and also I have taken 4 gig of ram out because it was second hand just to see if that was the problem.

here is the file thanks
My System SpecsSystem Spec
.

29 Mar 2013   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Well, is the raid setup a must for you? For most of the common users, it is not.

Think carefully, and act accordingly.

If RAID is not any must, uninstall JMicron.
Code:
Start Menu\Programs\JMicron Technology Corp
Dont worry .... if you uninstall it, it will not loss any functionality at all.
After uninstalling, follow Drivers - Clean Left over Files after Uninstalling to clean up the leftovers.

But if raid is a must, then, and only then, plan for update JMicron.
Code:
fffff880`01041000 fffff880`01062000   jraid      (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\jraid.sys
    Image name: jraid.sys
    Timestamp:        Thu Nov 25 08:57:17 2010 (4CEDD795)
    CheckSum:         0002CCCE
    ImageSize:        00021000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
You can see the installed driver is very old, so it is subject to fail. Update it from Driver

The motherboard might be new, but the BIOS is old.
Code:
BiosMajorRelease = 8
BiosMinorRelease = 15
BiosVendor = American Megatrends Inc.
BiosVersion = 0908   
BiosReleaseDate = 09/21/2010
Get the BIOS updates from ASUS, for PT6 SE.

Let us know the results.
My System SpecsSystem Spec
29 Mar 2013   #5
bonkers20

windows 7 ultimate 64bit
 
 

hi thanks I don't use raid and that driver must of come with slim drivers, so I will uninstall thanks for you help
My System SpecsSystem Spec
29 Mar 2013   #6
bonkers20

windows 7 ultimate 64bit
 
 

hi I have searched for bios updates, but I have the latest
My System SpecsSystem Spec
29 Mar 2013   #7
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Archie, OP has a Gigabyte board.

bonkers20, the JMicron also is a driver for your rear eSATA ports if you use them.
You might also check for a Marvell driver update for SATA.
My System SpecsSystem Spec
29 Mar 2013   #8
bonkers20

windows 7 ultimate 64bit
 
 

I have removed the JMicron because I don't use it and I will look for that now thanks
My System SpecsSystem Spec
29 Mar 2013   #9
bonkers20

windows 7 ultimate 64bit
 
 

also I had this same problem with my gigabyte ud3r motherboard
My System SpecsSystem Spec
29 Mar 2013   #10
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

I have missed something, what board are we working on here?
My System SpecsSystem Spec
Reply

 BSOD since new motherboard installed




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD after a new motherboard and processor was installed.
Hi all, I have the blue screen that tells me there is an error and then the system crashes. I have recently bought and had a shop install a brand new Gigabyte GA-B85M-D3H mother board and Intel i5 processor. It did have a AMD graphic card but the man at the shop took it out? I am not...
BSOD Help and Support
Replaced motherboard needs drivers installed before win7 can start
Have tried to use dism.exe and it worked the first time when I had a IDE hard drive and 32 bit processor. Now going to a cloned Sata hard drive with a new 64 bit processor and can't get the dism.exe program to install the new drives before Win7 64bit can load. Tried the normal repair in Win7 but no...
Installation & Setup
Problems installing Win 7 over XP, new motherboard installed.
Installed new motherboard after old one crashed, have original hard drive installed. When I try to install win 7 I get the following message..."Selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks." Talked to Western Digital, as I have a WD5000AAJS...
Installation & Setup
Installed new motherboard, unable to install windows (system hangs)
Hi everyone, A while ago, my grandparents gave me an old HP desktop. They thought it would be fun for me to screw around with it. I learnt a bit more about building.computers and decided I would just upgrade this old pc. I bought new CPUs and RAM and a new graphics card with the money i got from...
Installation & Setup
Installed new motherboard issue
So i installed my new motherboard and cpu, everything is connected (I double checked) and when i turn it on i can hear one short beep and there is no display. Anyone know this issue? Specs: Asus P8H61-m le/USB3 Gigabyte GTX 550 Ti Intel i5 2500k 3.3 Ghz
Hardware & Devices
No sound after after new motherboard installed
So I am getting no sound after putting a new motherboard in my PC, and doing a clean install of windows 7 64-bit. This is my motherboard P67 Motherboard Series Manufacturing - ASRock Inc. I installed all default drivers from the CD that came with the board
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App