Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD: Memory Management, even after reinstall

03 May 2013   #11
Mark67

Windows 7 Profeesional 64-bit
 
 

So I started the mem test again, I have done it at least 3 times before, and this time (last night) it hit a bunch of errors on the first pass. From there I tried to determine which DIMM is bad, I have 2. And I can't. I tried one DIMM for a few passed, nothing. Tried the next one, nothing. Moved DIMM1 to slot 2 and received 1 error. Tried DIMM2 on slot 2 nothing. Tried DIMM1 back in slot 1 for a bunch of passes, nothing. DIMM2 again in slot 1 nothing. Both DIMMs again together for a few passes nothing.

I am feeling like the RAM is bad, but I am frustrated that I can't get a constant failure rate. I will contact Corsair and see what they will do for me.


My System SpecsSystem Spec
.
03 May 2013   #12
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

If Memtest86+ starts showing errors, Stop testing. Errors/red lines means one or more RAM is faulty. But the fault may occur due to a faulty DIMM slot, too, which is a motherboard component. Using memtest86+, you can discriminate between a faulty RAM and a faulty motherboard.

How? Say you have two RAM sticks and two DIMM slots. You obtained errors at the test with all RAM sticks installed. Now, remove all the sticks but one. Test it in all the available slots, one by one. Continue the same procedure for all the available sticks.
How to make the inference that is it a RAM issue or it is a motherboard issue? Suppose you have got the result like that:
testSlot1Slot2
RAM1ErrorError
RAM2GoodGood
It is a RAM, a bad RAM.

But if you have got a result like that:
testSlot1Slot2
RAM1ErrorGood
RAM2ErrorGood
It is a motherboard issue. The particular slot is bad.

Anyway, better you replace the RAM as you have got errors. Let us know how the computer is working with the replacement RAM.
My System SpecsSystem Spec
04 May 2013   #13
Mark67

Windows 7 Profeesional 64-bit
 
 

I have tried to determine if it is the RAM or Mobo, but can't. The darn errors don't show up every time I test. Which is weird, from what I have seen in the past is when RAM fails, it fails is a spectacular way.

Oh well. I will have to wait and see what Corsair does for me. I will update as soon as I can.

Thanks for the help again.
My System SpecsSystem Spec
.

Reply

 BSOD: Memory Management, even after reinstall




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Memory Management BSOD
I had been getting Memory Management BSOD so I ran memtest and removed a bad memory stick. I then ran memtest on the 3 remaining sticks and it found no errors. However, I am still getting this BSOD although not as often.
BSOD Help and Support
BSOD about Memory Management
My computer had gone through quite a whole lot of problems such as missing drivers, corruption of Windows, RAM malfunction, and many more. I have fixed almost all of them. Currently there is a major problem that is annoying me and I am unable to solve it. It is this BSOD that I kept encountering....
BSOD Help and Support
Memory Management BSOD
Hello there, I keep getting a MEMORY_MANAGEMENT BSOD and I have no clue what is causing it. I hope someone could help me out with my problem :). Thanks in advance, Thomas p.s: dump attached.
BSOD Help and Support
BSOD - Memory Management
For the last few days, I've had BSOD every 4-5 hours of my computer on. Since it was set to automatic restart, I've only managed to see one of the BSOD reports which said 'Memory Management'. After doing some research into the matter, I used MemTest86+ and got errors for my ram, which makes me...
BSOD Help and Support
BSOD Memory Management
I built my computer in April of 2010 and have been having a lot of BSOD problems since it was built. It will generally crash within 3-10 minutes of booting, giving a MEMORY MANAGEMENT or PAGE FAULT IN NON PAGED AREA blue screen. I found that if it boots and is stable I can just hibernate the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:06.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App