Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Win XP 64 Bit Random Crashing "Multi Bugcheck Codes"

31 Mar 2013   #1
talas9

Windows 7 Pro 64bit
 
 
BSOD Win XP 64 Bit Random Crashing "Multi Bugcheck Codes"

Hi,

This is my first post in this forum, actually i found that this is the most helpful forum all over the net,

Anyway I need a little help solving this BSOD issue please,

My PC is crashing randomly when I'm away and getting BSOD, with the following errors,

I tried to run "Disk Defragmenter", "Disk Scan" and "sfc /scannow" with no results,

My Hard Drive is an SSD with the capacity of 60GB and I have four Additional hard drives each two create a "RAID 1", I'm getting the BSOD randomly and with out running any application, I tried to update all Intel drivers in my machine and "Jmicron Raid" as well with no hope ,

and here is "Who crashed" Log:

====================================================================
System Information (local)
--------------------------------------------------------------------------------

computer name: USER-
windows version: Windows XP x64 Service Pack 2, 5.2, build: 3790
windows dir: C:\WINDOWS
CPU: GenuineIntel Intel(R) Core(TM) i7 CPU 975 @ 3.33GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 12875243520 total
VM: 2147352576, free: 2000760832



--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\WINDOWS\Minidump

Crash dumps are enabled on your computer.


On Tue 3/26/2013 7:08:01 PM GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\Mini032713-01.dmp
uptime: 06:46:14
This was probably caused by the following module: ntoskrnl.exe (nt+0x2E890)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF800011A9B28, 0xFFFFFADEBC1C1070, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Sun 3/24/2013 6:56:52 PM GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\Mini032513-01.dmp
uptime: 12:21:52
This was probably caused by the following module: ntfs.sys (Ntfs+0xF87B)
Bugcheck code: 0x24 (0x19033D, 0xFFFFFADEC2E8C360, 0xFFFFFADEC2E8BD70, 0xFFFFFADEC202C9ED)
Error: NTFS_FILE_SYSTEM
file path: C:\WINDOWS\system32\drivers\ntfs.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT File System Driver
Bug check description: This indicates a problem occurred in the NTFS file system.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.
Google query: ntfs.sys Microsoft Corporation NTFS_FILE_SYSTEM




On Tue 3/19/2013 1:31:33 AM GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\Mini032413-01.dmp
uptime: 12:18:46
This was probably caused by the following module: ntoskrnl.exe (nt+0x2E890)
Bugcheck code: 0x4E (0x2, 0x2F1960, 0x33FFFF, 0x1)
Error: PFN_LIST_CORRUPT
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that the page frame number (PFN) list is corrupted.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Thu 3/7/2013 9:01:06 AM GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\Mini030713-05.dmp
uptime: 01:07:29
This was probably caused by the following module: ntfs.sys (Ntfs+0xF87B)
Bugcheck code: 0x24 (0x19033D, 0xFFFFFADEF0719090, 0xFFFFFADEF0718AA0, 0xFFFFF800010449FB)
Error: NTFS_FILE_SYSTEM
file path: C:\WINDOWS\system32\drivers\ntfs.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT File System Driver
Bug check description: This indicates a problem occurred in the NTFS file system.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.
Google query: ntfs.sys Microsoft Corporation NTFS_FILE_SYSTEM




On Thu 3/7/2013 7:48:05 AM GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\Mini030713-04.dmp
uptime: 00:40:23
This was probably caused by the following module: ntoskrnl.exe (nt+0x2E890)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF800011A9B28, 0xFFFFFADEF0757250, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Thu 3/7/2013 5:02:59 AM GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\Mini030713-03.dmp
uptime: 00:03:07
This was probably caused by the following module: ntoskrnl.exe (nt+0x2E890)
Bugcheck code: 0xC2 (0x44, 0x80000000000000, 0xFFFF080000000000, 0x0)
Error: BAD_POOL_CALLER
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that the current thread is making a bad pool request.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Thu 3/7/2013 4:58:10 AM GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\Mini030713-02.dmp
uptime: 00:31:01
This was probably caused by the following module: ntoskrnl.exe (nt+0x2E890)
Bugcheck code: 0x1E (0xFFFFFFFFC000009A, 0xFFFFF80001055209, 0x0, 0x0)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


The following dump files were found but could not be read. These files may be corrupt:
C:\WINDOWS\Minidump\Mini030713-01.dmp
=====================================================================

And the SF Debug Logfile is attached,

Thank you.


My System SpecsSystem Spec
.
31 Mar 2013   #2
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Hi talas9 welcome to SevenForums

Try to update your SSD firmware .

Tip   Tip
You do NOT want to Defrag an SSD drive . No need to.


Tip   Tip
I'd personally upgrade to Windows 7 . So you could really get the speed of the SSD drive
My System SpecsSystem Spec
31 Mar 2013   #3
talas9

Windows 7 Pro 64bit
 
 

Actually I already know that it doesn't make sense to defrag a SSD, But when you stuck with some issue you will try everything even if it's useless,

Can i know how to update SSD Firmware if it's attached to JMicron Raid Controller?
My System SpecsSystem Spec
.

31 Mar 2013   #4
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

What is the manufacture and model of the SSD drive ?
My System SpecsSystem Spec
31 Mar 2013   #5
talas9

Windows 7 Pro 64bit
 
 

It's Patriot Pyro (Screenshot Attached)
My System SpecsSystem Spec
31 Mar 2013   #6
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Patriot Pyro SSD update Software

download

Patriot Pyro SSD 60GB firmware

download

Note   Note

Release Date : 05/02/2012
Rev. 5.0.2
Fixes:
- Added Nand Support
- Updated SMART and Log Support
- Improved hardware handling
- Improved internal read buffering
- Improved block count management
- Improved Power Management
My System SpecsSystem Spec
31 Mar 2013   #7
talas9

Windows 7 Pro 64bit
 
 

I found the Software to upgrade Patriot Pyro SSD 60GB here:
http://www.patriotmemory.com/softwar...SD_Updater.zip


And the latest firmware is here:
05/02/2012 5.0.2 Release Notes
http://www.patriotmemory.com/softwar..._PSE_5_0_2.zip

I'll try to upgrade the firmware

Thank you for really fast response
My System SpecsSystem Spec
31 Mar 2013   #8
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

You're welcome
My System SpecsSystem Spec
03 Apr 2013   #9
talas9

Windows 7 Pro 64bit
 
 

Actually i was unable to update the firmware because of some silly error message in the update application, and after searching the web i found that most of the users of this model facing the same issue with updating the firmware, and the support team of this brand are not reponding,

Sorry just wanted to ask if you are pretty sure that upgrading the firmware will solve the issue.


thanks in advance.
My System SpecsSystem Spec
03 Apr 2013   #10
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

It's a start . Some of the BSODs on an SSD is due to outdated firmware .
My System SpecsSystem Spec
Reply

 BSOD Win XP 64 Bit Random Crashing "Multi Bugcheck Codes"




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Graphic Card crashing computer at random time, "unknown" cause.
Hi everyone; Been having trouble with my AMD Radeon 6800 HD card, I think. Symptoms: - Cut to a black screen. - Alternatively, when enabled "Graphics OverDrive" in "Performance" in Catalyst Control Center, instead of cutting to a black screen, it cuts to a bunch of linear cubes, then...
Graphic Cards
Random BSOD "bugcheck"
Hello, Ive been floating around these forums for a while but have never really posted until today. After building my new system, I have been experiencing random BSOD during odd moments. Sometimes, my PC will be idle while other times, I will be playing graphic heavy games when it will freeze,...
BSOD Help and Support
BSOD: random and error "The bugcheck code: 0x0000009f"
Hello My laptop is a Dv7-3165dx running Windows 7 home edition. Service Pack 1 64-bit OS . when i start up my computer, everything is fine it loads up i sign in and the desktop loads up with no problem. i've had a problem where my laptop would not respond when closing the lid, shutting down,...
BSOD Help and Support
BSOD random and error saying "The bugcheck was: 0x00000024"
all drivers updated memtest - no errors hdd test - no errors but still getting this error and blue screen: Event: Log Name: System Source: Microsoft-Windows-WER-SystemErrorReporting Date: 2012-09-18T18:17:14.000
BSOD Help and Support
Explanation of "QUOTE" and "MULTI" Buttons ?
I have searched for examples of use of above two buttons when answering posts here and have read the Forum Rules but haven't been able to find explanations of their use. I am pretty happy with the use of the "QUOTE" button but do not know how to use the "MULTI" button . Any help would be...
Chillout Room
Win7 x64 Random BSOD's, different bugcheck codes
Hi, im having trouble finding out what's causing this PC to crash from time to time. The poblems started a few weeks ago when i upgraded the CPU and the GPU. The vendors of the components and the motherboard stayed the same. (E6550 --> E8500 and HD4850 --> HD6850) It had some crashes before but...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 19:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App