Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Seemingly At Random, error KMODE_EXCEPTION_NOT_HANDLED

01 May 2013   #31
k4nc3r

Windows 7 Home 64 Bit
 
 

I installed the new driver for the headset and it still BSOD'd. Here's the dmp file.


My System SpecsSystem Spec
.
01 May 2013   #32
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Did you update your Graphic Card driver ?
My System SpecsSystem Spec
02 May 2013   #33
Pauly

Win7 Ultimate X64
 
 

If safe mode works for prolonged periods then thats a good sign, i would recommend you remove the Gigabyte software especially easytune its installed a really old driver on your system (2006) thats not going to help matters, if BSODs are still occuring after that then driver verifier may give us some more clues, i think you may have slightly misunderstood its purpose, its job is to cause stress on drivers in the hope of causing a crash and then if/when it does it can often generate a more accurate dump file that can specify the faulting driver instead of just generalising and blaming the kernel upon which they crashed. It will make the system slow and sluggish but thats the idea and may give us some more info
My System SpecsSystem Spec
.

03 May 2013   #34
k4nc3r

Windows 7 Home 64 Bit
 
 

Quote   Quote: Originally Posted by VistaKing View Post
Did you update your Graphic Card driver ?
I just did now, when I formatted the harddrive and reinstalled windows I didn't get the new drivers for my GPU. Though I had all updated drivers on the GPU, I believe, when it was BSODing to begin with. I'll turn on driver verifier when I get home and see if I cant get it to crash again, shouldn't be a problem there. Here's the dump file from last night before I installed newest GPU drivers.
My System SpecsSystem Spec
03 May 2013   #35
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus. All, but not MSC.
  5. Apply > OK
  6. Accept then restart.
A stop 0x3B is very common, and it is some of the cases very difficult to debug, at is is related to a display driver mostly (as in your case). So we can try to attempt for a most perfect driver installation only. According to Carrona.org,
Quote:
Cause
This error has been linked to excessive paged pool usage and may occur due to user-mode graphics drivers crossing over and passing bad data to the kernel code.
Install the latest WHQL of the display driver only.
  • Uninstall All nvidia items in Control Panel > Programs and features
    • 3D Vision Control Driver
    • 3D Vision Driver
    • Graphics Driver
    • HD Audio Driver
    • PhysX
    • nvidia Update
    (Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
  • Reboot. Now follow Drivers - Clean Left over Files after Uninstalling
  • Boot normally now. Go to Drivers - Download NVIDIA Drivers, Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:

  • During uninstall and install, accept all the offered reboots.
Also, Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
At least 30% excess is safe.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.
My System SpecsSystem Spec
06 May 2013   #36
k4nc3r

Windows 7 Home 64 Bit
 
 

Ok, sorry for the delay, family came in town.

I cleared out the start up, got rid of all old nvidia drivers, driver swept them, (though I skipped over the chipset ones, wasn't sure what to do there...), re-installed nvidia drivers you showed to select, did the stress test for awhile no issues there, checked the power supply calculator, good there, and everything looks fine on Speccy. The screenshot was just after an hour or so of normal usage that causes the BSOD.

So far I haven't run into any BSOD's yet but I've gone for a week before a BSOD in the past so I'm keeping my fingers crossed that this was the issue. I'll let you know when/if the next one comes. Hopefully this was the magic bullet. On a side note, does that mean I won't be able to do 3D gaming? Can't say I had that in mind, but just curious on the couple of drivers that I didn't install. Thanks a ton for your help again, can't thank you enough here.
My System SpecsSystem Spec
06 May 2013   #37
k4nc3r

Windows 7 Home 64 Bit
 
 

Well this is strange, I had shut my computer off to go out for awhile and when I came home to turn it on there was a 'Windows recovered from a unexpected shutdown' prompt. I didn't see a bluescreen at all, but it says there was one. Here's the dump file.
My System SpecsSystem Spec
06 May 2013   #38
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Intel RST AHCI driver is a failing module here.
Code:
fffff880`0374dd88  fffff880`0106325bUnable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
 iaStor+0x2e25b
Download and install this particular versionof Intel Rapid Storage Driver:
Also, seeing frequent storage related errors.

Code:
fffff880`0374ea08  fffff880`0151d6df fltmgr!FltpDispatch+0xcf
fffff880`0374e978  fffff880`0151ebcf fltmgr!FltpLegacyProcessingAfterPreCallbacksCompleted+0x24f
I think you should not use Marvell 91xx SATA 6G Controller. (SCSI Controller)


ITEMVALUE
Model WDC WD1002FAEX-00Z3A0
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target ID 0



So this driver should not be present there. Uninstall Marvell. Then follow Drivers - Clean Left over Files after Uninstalling

Let us know the situation when done.
My System SpecsSystem Spec
08 May 2013   #39
k4nc3r

Windows 7 Home 64 Bit
 
 

Ok, I got the intel driver and got rid of the Marvel driver. I know we were having issues with that before, I completely forgot when I reinstalled windows that it would pop back up. I'll run driver verifier tonight to see if I can get it to BSOD. thanks again
My System SpecsSystem Spec
08 May 2013   #40
k4nc3r

Windows 7 Home 64 Bit
 
 

Damn. BSOD while playing CIV 5. Here is the zip. Have run into a build this buggy without have something wrong with the hardware itself? Thanks man
My System SpecsSystem Spec
Reply

 BSOD Seemingly At Random, error KMODE_EXCEPTION_NOT_HANDLED




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Seemingly Random BSOD, error 0x0000003B
Hi, first time posting on the Seven Forums. Glad to be here. :) Anyway, about a month or two ago, I started getting random BSODs, shortly after that, my GPU started overheating. I assumed those blue screens were due to my faulty GPU, so I went and purchased a GTX 770. They SEEMED to stop, but...
BSOD Help and Support
BSOD seemingly at random, error 0x000000d1
I've had a couple of BSODs in the past, but recently it has become a lot worse. I have tolerated it for a while, while trying to fix it by myself. I'm not that tech savvy, and I'd like some assistance. I don't have any but recent back-ups, so that is not possible. I have attached the .dmp files...
BSOD Help and Support
Daily BSOD, seemingly random error messages
Hi, My computer has a rather strange problem: it will crash with a BSOD the first time it is started after being off for more than a few minutes. For example, if my computer was off overnight, within a few hours of being turned on it will crash with a seemingly random BSOD (different error...
BSOD Help and Support
BSOD Error 0x00000f4 Seemingly random
Had this issue awhile ago, but was on the verge of a reformat anyway. I really don't want to do that if I don't have to. Edit: I've replaced the Video card with an older one and so far no issues. My next question is whether the video card is shot or whether it's another fixable issue. It ONLY...
BSOD Help and Support
Seemingly Random BSOD (System Exception Error)
Hi, I'm attempting to fix my father's computer but am in (slightly) over my head. I just restored it to the factory state, thinking that it was some sort of software conflict, but no dice. Any ideas?
BSOD Help and Support
Random BSOD, error 0x0000001e KMODE_EXCEPTION_NOT_HANDLED ntoskrnl.exe
Hi! Since I've upgraded my PC with a new motherboard, CPU, a second Nvidia GTX 580 graphics card (to make it SLI) and a cooler system for the CPU, I've been having random BSOD crashes. I reinstalled my OS after changing the hardware, and since then I've been having these BSOD. The BSOD...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App