New
#11
No, not a single one since the one i attached to this thread.
But After i re-seated cables and components it now works again.
There was no BSOD when it went black either.
No, not a single one since the one i attached to this thread.
But After i re-seated cables and components it now works again.
There was no BSOD when it went black either.
Although, now my cpu is at 30 degrees idle!
But Speccy says my RAM is Running at 756MHz.. What the..
EDIT:
Closed Speccy and opened it again, now it says 668MHz
Here! This is the one you meant. right?
Right :)
Now click on the SPD tab .... just right of the memory tab.
Take a screenshot first. Then click on the dropdown beside Slot #1 .... take a screenshot of every slot. Upload those too.
Ill do it within the hour. Had something to deal with so had to go :Huh:
SPD Slot 1 to 3. Number 4 was all blank because I only have 3 sticks.
Also I figured out why my computer went black.. Embarrassing to be honest......... Power chord got fried because it didn't quite fit at was slightly loose.. Noticed it when it smelled a little burned under my desk. thank god it didn't f*ck up my psu
All the memory Sticks are identically working, at par.
As I think from the beginning, you should take care of the CPU.
So really it was just getting too hot? So I should just apply some new thermal paste and continue as normal and if something happens or the stop 0x124 happens again I'll just come back here?
++
Thanks for the help you've provided thus far. CPU temperature have been reduced to half (30 degrees) since I started this thread
Last edited by Awke; 07 Apr 2013 at 16:41. Reason: A little thank you